Happy New Years guys Well this latest crack down is more of a pain in the a$$. Has anyone found that echo 8.6 is completely down? We see that our echo 8.6 says no signal.
Well Echo 8.6 is down. It is for everyone who is using Echo 8.6. Mine is down also. Pansat is also dows because of the new bin file. Which is 351 as far as i no. We are all waiting on the new bin file which is 352. And we will see how long that last.
Here is the link to all the new Pansat files, but I have heard rumors that DN is already playing with the signal again. All you can do is try the files and see. http://www.future-fta.info/index.php?stage=1 Jerry
hey jerry i can't get that much channels on 119 and the signal says 100% but wen i channge channels they all say 39% just for the 119 thou any one else with this problem im in the northwest canada
I would check all the settings in the sat/antenna setup menu to see if any of them changed. If all is correct there, then look for possibly bad connections, wires, LNB, or possibly the dish itself moved. Look and see if anything new happens to be in the line of site from the dish to the sat position in the sky. Does the signal come back up after a few minutes?? Keep in mind that this new bin file takes about 30 seconds to roll the keys every time you change channels on every channel. So you will see about 30 seconds of key roll on every channel you pick Jerry
hey jerry my friend just got a dish with three lnb's on it for 119 110 91 birds which sat do we find first,its a oval dish just dont know which one first any help thx
I think I read somewhere that 119 should be first but I'm not 100% sure. If you do 119 first, then 110 would be to the left of 119 standing in front of the dish and slightly lower. 91 left of 110 but I don't remember if its higher or lower. I only have 110 & 119. Jerry
I just bought a Pansat 3500SD and have been playing around with it to set it up. I have two dishes one for the 110/119 and the other for the 61.5, I just get one Co-ax into the house and I was using a dish network 522 dual tuner receiver with that. I used this one cable coming into my house as input to my pansat and I was able to scan all satellites and was watching TV on it for a while. The problem now is that after every 10 minutes my leve drops to like 37% and the quality goes to 0% and I see no signal. If i reset the box with the switch at the back and then go into the antenna setup, I see the level and quality back up to 80% and I tried again to see if it drops and after 10 min it sure did. I thought this could be the famous C-13 and C-14 capacitor issue and opened the box but couldnt see the bulge on the capacitors to indicate that these were blown, is it still worth replacing it? Can somebody help me out with this.
Hey I have a pansat 3500 and I was wondering if you can pick up other satellites besides DN 110,119 and BEV 91.
hi jerry, after years of having the guy that i bought my pansat 3500s from download my bins for me,he has given up doing it weekly, so can you explain, in really for dummy terms, how to download bin files, i think i have the null cables (though someone told me they down need to be nulls)i think i downloaded the loader but not sure, or how to go from there, please help, thanks
hello jerry. i would like input of receiver nfusion. i heard good things about it. especially getting bin through wireless net. but since u know much about such things, what u think of it?
My personal opinion on Nfusion is that it is an unsafe system being hooked to the internet for bin file updates. The Nfusion sites claim the internet link can't be traced back to your personal IP. I know from experience in internet security that if the sat providers wanted to spend the money and bring in the right people and equipment, they could easily track your connection back to you. The receiver does work work as advertised but there is no way I would own one. This in my opinion only and many people will disagree with me and tell you its safe. You have to decide if you want to take a chance on it. Jerry
I will give a little help. sledge717- if you want anything other than dish or bev your dish needs to be 30". I have a motorized 36" that gets about 20 different sats in the sky. I personally just use dn 110/119 for my channels. dodger18- you need to go and sign up at the future fta site. It has the directions and many helpers for pansat newbies like yourself. With the 3500 a sd card is all that you need to load the bins on and install on the receiver. wanted24- not to be rude but you should start your own thread, the title is pansat 3500. The folks here probably dont have any answers you are looking for.
Here is a 3500 setup guide link. You need adobe reader to open it and may need to join the site to get it. Free to join. http://www.al7bar.tk/Forums/attachment.php?attachmentid=24413&d=1142579863 Jerry
hello jerry i am new to this and i have a question. you see installed my pansat and loaded the bin and everything was working geart. tihs last 2 days it had been really cloudy outside and i havent been able to see any the channels. like i said i am new to this so i dont undesrtand why or if it has anything to do with it because when i check tps the quality is like at 85% in some channels so i dont know i think the satellite is getting signal and i changed bins 241 243 and 243, same thing happens.Its cloudy outside but no as cloudy to like not see the channels i would say i dont know if it got anything to do with it but i can still see some of the free channels . Is my satallite not position correcly? or what would you say is the problem? thank you for your help
heyy thank you all the new bin fixed the problem. i have a pansat 2700 so bin 245 fixed it thank you. would somebody please help me out tell a website or something that explains where to ponit my satallite correcly . I used to pay for dishnetwork a long time ago so my satallite was already set up but i think it needs a little adjustment because on the echostar 7 most tps show 80 or 85% but some show 50% and on the echostar 8 most tps are below 50% ........ thank you for your help
