I'm having issues buring a data DVD. It does work on an Imation DVD-RW, but not on a MTV DVD-R (it's rubbish, I know) or an Imation DVD-R. Is this just a media type issue or something deeper? The log is below. 5C(SERIAL EDITED) Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 11:54:32 AM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <IOMEGA DVDRW4216IND-A> Version: 1.20 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <IOMEGA DVDRW4216IND-A >Version: 1.20 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : IOMEGA DVDRW4216IND-A atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3120026AS atapi Port 1 ID 0 DMA: On DiskPeripheral : ST320423A atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === IOMEGA DVDRW4216IND-A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1624MB (1663284kB) Memory in use : 20 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.7.2006 UDF compilation 8:32:25 PM #1 Text 0 File Isodoc.cpp, Line 6423 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 8:32:25 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 8:32:25 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 8:32:25 PM #4 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 8:32:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2284079 (507:34.29, 4461MB) 8:32:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 8:32:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: IOMEGA DVDRW4216IND-A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 8:32:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:32:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2284080 (2284080) = #2284080/507:34.30 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2284080 blocks [D: IOMEGA DVDRW4216IND-A] -------------------------------------------------------------- 8:32:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: IOMEGA DVDRW4216IND-A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4677795840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2284080 | lead-out | 1 | 0x41 | 0x00 8:32:25 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:32:25 PM #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:32:25 PM #13 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 8:32:25 PM #14 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 8:32:25 PM #15 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 8:32:25 PM #16 Phase 32 File dlgbrnst.cpp, Line 1730 Simulation started at 2.4x (3,324 KB/s) 8:32:25 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:32:25 PM #18 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 8:32:25 PM #19 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 8:32:25 PM #20 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:32:25 PM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 22 DA 30 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 8:32:25 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: IOMEGA DVDRW4216IND-A 8:32:25 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 8:32:25 PM #24 Phase 34 File dlgbrnst.cpp, Line 1730 Simulation failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 19/04/2006 8:34:55 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi ubersims Welcome to aD First let's edit out that serial at the top of the log - begins w/ 5C. Update your firmware to the latest 1.22 - this can help your drive with write strategies of media. The manufacturer confirms your stmt about them Better to use would be Verbatim or made in Japan Fuji or Sony. Not much else wrong. Your illegal disc looks like it's just a media and/or firmware update problem.
*cough* Done Does this actually mean something or is it just nasty text put in there by an inferior manufacturer?
This is the manufacturer & media code of who made those discs you're using. CMC Mag - 8x -R. CMC is not know for it's quality - pretty hit or miss.
Check this site for info--doesn't look good! Check down in the 4th class area. http://www.digitalfaq.com/media/dvdmedia.htm
OK, I'm now using Sony DVD-R's and have updgraded my firmware to v1.22 but I'm still getting the error. Can anyone help me futher please? -- NEW LOG -- Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 11:54:32 AM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <IOMEGA DVDRW4216IND-A> Version: 1.22 - HA 1 TA 2 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <IOMEGA DVDRW4216IND-A >Version: 1.22 - HA 1 TA 2 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : IOMEGA DVDRW4216IND-A atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3120026AS atapi Port 1 ID 0 DMA: On DiskPeripheral : ST320423A atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === IOMEGA DVDRW4216IND-A D: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1447MB (1481764kB) Memory in use : 29 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.7.2006 UDF compilation 5:46:31 PM #1 Text 0 File Isodoc.cpp, Line 6423 UDF document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 5:46:31 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 5:46:31 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 5:46:31 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: IOMEGA DVDRW4216IND-A running 5:46:31 PM #5 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 5:47:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2107663 (468:22.13, 4116MB) 5:47:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 5:47:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: IOMEGA DVDRW4216IND-A, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 5:47:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW.) 5:47:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2107664 (2107664) = #2107664/468:22.14 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2107664 blocks [D: IOMEGA DVDRW4216IND-A] -------------------------------------------------------------- 5:47:10 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: IOMEGA DVDRW4216IND-A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4316495872, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2107664 | lead-out | 1 | 0x41 | 0x00 5:47:10 PM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:47:10 PM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:47:10 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 5:47:10 PM #15 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 5:47:10 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 5:47:10 PM #17 Phase 28 File dlgbrnst.cpp, Line 1730 Speed measurement started 5:47:10 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:48:56 PM #19 Text 0 File WriterStatus.cpp, Line 116 <D: IOMEGA DVDRW4216IND-A> start writing Lead-Out at LBA 2107664 (202910h), length 0 blocks 5:48:56 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:48:56 PM #21 Phase 29 File dlgbrnst.cpp, Line 1679 Speed measurement completed: 30.5x (42,140 KB/s) 5:48:56 PM #22 Phase 32 File dlgbrnst.cpp, Line 1730 Simulation started at 2.4x (3,324 KB/s) 5:48:56 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:48:56 PM #24 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 5:48:56 PM #25 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 5:48:56 PM #26 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 5:48:56 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 290 D: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 20 29 10 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 5:48:56 PM #28 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: IOMEGA DVDRW4216IND-A 5:48:56 PM #29 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 5:48:56 PM #30 Phase 34 File dlgbrnst.cpp, Line 1730 Simulation failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 19/04/2006 8:34:55 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You say you are trying to burn a Data DVD. Would you go through the steps of how you set it up, like how you started the utility and what options you set for it? I'm just not used to seeing the "UDF Modeure" type entries. Have you put the media in the drive and then done a disc info option? It should just show an empty disc, but it might do something else.
1. I open Nero Burning Rom through the start menu 2. Select DVD-ROM (UDF) 3. I think I use the standard settings, although "Determine maximum speed", simulation and write are all selected. 4. Select New 5. Drop and drag my files 6. Select Burn It measures the speed OK and then loses it when it tries to simulate. And for the record, I did a disc info check and it was an empty disc.
This may have nothing to do with your problem, but you might try it. If I use SmartStart to make a Data DVD, it sets up a DVD-ROM(ISO). You might try it that way to see if it helps. The only thing I changed was the Multi-session, which it seems to make default for this selection.
@ubersims Try what saltgrass suggested. According to your last log 'multisession' is turned off - correct for a -R disc. The next thing - again your drive may not like and fully recognize this disc. The media specific part in the log shows a generic code. From what I can find on your drive it looks like a nec 1300a - max burn speed of 4x. Usually the Sony or Fuji 8x that are made in Japan are manufactured by Taiyo Yuden. Very compatible with drives along w/ verbatim. Your's are made by Sony which is good too. Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW.) When you start the data dvd - do you already hae the disc in the drive?
Saltgrass, binkie7 & blivetNC, I tried all that you suggested and it was to no avail. Most recent log below: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 11:54:32 AM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <IOMEGA DVDRW4216IND-A> Version: 1.22 - HA 1 TA 2 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <IOMEGA DVDRW4216IND-A >Version: 1.22 - HA 1 TA 2 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : IOMEGA DVDRW4216IND-A atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3120026AS atapi Port 1 ID 0 DMA: On DiskPeripheral : ST320423A atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === IOMEGA DVDRW4216IND-A D: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2046MB (2095852kB) Free physical memory: 1568MB (1605820kB) Memory in use : 23 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.7.2006 ISO compilation 9:56:12 AM #1 Text 0 File Isodoc.cpp, Line 6423 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:56:12 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 9:56:12 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 9:56:12 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:56:12 AM #5 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 9:56:12 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2107311 (468:17.36, 4115MB) 9:56:12 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:56:12 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: IOMEGA DVDRW4216IND-A, Media type: DVD-R Disc Manufacturer: SONY08 - D1 Disc Application Code: 64, Disc Physical Code: 193 9:56:12 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:56:12 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2107312 (2107312) = #2107312/468:17.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2107312 blocks [D: IOMEGA DVDRW4216IND-A] -------------------------------------------------------------- 9:56:13 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: IOMEGA DVDRW4216IND-A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4315774976, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2107312 | lead-out | 1 | 0x41 | 0x00 9:56:13 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:56:13 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:56:13 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 9:56:13 AM #15 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 9:56:13 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 9:56:13 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 2.4x (3,324 KB/s) 9:56:13 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:56:13 AM #19 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 9:56:13 AM #20 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 9:56:13 AM #21 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:56:13 AM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 290 D: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 20 27 B0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 9:56:13 AM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: IOMEGA DVDRW4216IND-A 9:56:13 AM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 9:56:13 AM #25 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 19/04/2006 8:34:55 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Someone on another forum mentioned that the burner you have seemed to have problems with media rated at 8x. I know I have to use media rated at 1-2.4x for my old HP burner, so maybe, if you haven't already, try a media rated at a slower speed, like 4x. Even if you burn at a slower speed, it may not help if you are having this type of problem.
Another note, the DVD-RW that I said successfully burned in my first post is unreadable on my computer, but completely fine on my gf's computer. I'm off to buy a new burner today anyway (for said gf's machine) but I might commandeer it for my PC.
@ubersims Just say you want to test it out for her in yours 1st!! You know make sure everything is ok and what not. Now for your curretn drive: It is an older drive and 8x & higher may give it a problem as saltgrass pointed out. Your log points again to the media not being fully recognized. You could also try and lens cleaner on it - the lens may be dusty. But I doubt this will help the illegal disc error. Keep us posted!
Well, all works well on the new DVD-RW, a Pioneer DVR-111D. Just out of interest, the DVD-RW I burned originally now is readable on my computer.
