Hi everone, I think this issue has be discussed before, but i think my case is a bit different (if its not i am sorry but im a newbie to this as of now) here is my issue. I have always written DVD CD's on Maxell DVD-R CD's (Up to 8X) Always on the lowest speed because i dident want anything to go wrong (I guess im the slow and stedy type of person) Any way.. the issue is i ran out of CD's and went to get more, i noticed that there were no Maxell DVD-R 8x CD's but there were Maxell DVD-R 16x CD's so i bought a 25 pack.... thinking it cant be that big of a difference but well.... then "Illegal Error" I use Nero Burning Rom v6.6.0.1, and i tried burning on every different speed that was offered with the 16x CD and in simulation mode always the same thing, one thing i did notice though with my 8x maxell CD's im not "allowed" to change the speed the tab becomes gray but with the 16x i can change speeds... any way heres the log please help. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 4:24:34 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM Nero version: 6.6.0.1 (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.07 - HA 1 TA 1 - 6.6.0.1 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <OEM CD-ROM F564E >Version: 2.00 - HA 1 TA 0 - 6.6.0.1 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1600AB-22DYA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : OEM CD-ROM F564E atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On CdRomPeripheral : UD1853B IJM476K 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === OEM CD-ROM F564E D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 UD1853B IJM476K F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 447MB (458224kB) Free physical memory: 53MB (55136kB) Memory in use : 87 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.10.2006 ISO compilation 12:12:22 PM #1 Text 0 File Isodoc.cpp, Line 6165 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:12:22 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 12:12:22 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:12:22 PM #4 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 12:12:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2263519 (503:00.19, 4420MB) 12:12:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 12:12:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 12:12:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:12:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2263520 (2263520) = #2263520/503:0.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263520 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 12:12:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4635688960, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2263520 | lead-out | 1 | 0x00 | 0x41 12:12:22 PM #11 Phase 24 File dlgbrnst.cpp, Line 1853 Caching of files started 12:12:22 PM #12 Text 0 File Burncd.cpp, Line 4003 Cache writing successful. 12:12:22 PM #13 Phase 25 File dlgbrnst.cpp, Line 1853 Caching of files completed 12:12:22 PM #14 Phase 32 File dlgbrnst.cpp, Line 1853 Simulation started at 2x (2,770 KB/s) 12:12:22 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:12:22 PM #16 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 27:59,235 (1679235ms) -> OK 12:12:22 PM #17 Text 0 File DVDR.cpp, Line 2027 Recording mode: Sequential Recording Mode for Multisession 12:12:22 PM #18 Text 0 File Mmc.cpp, Line 20673 Set BUFE: Buffer underrun protection -> ON 12:12:22 PM #19 Text 0 File DVDR.cpp, Line 2168 Start write address at LBA 0 DVD high compatibility mode: No 12:12:22 PM #20 Text 0 File Cdrdrv.cpp, Line 8281 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:12:22 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x89 0xE0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 12:12:22 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702 Illegal disc 12:12:22 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702 Could not perform start of Disc-at-once 12:12:22 PM #24 Text 0 File dlgbrnst.cpp, Line 1711 Set remaining time: 0:00,000 (0ms) -> OK 12:12:22 PM #25 Phase 34 File dlgbrnst.cpp, Line 1853 Simulation failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 4:24:34 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 7/26/2006 10:05:53 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) As i said, i did try it in every different speed this is just one of the error log's i also ran it with out sim mode, still same thing. please help thanks!
Hmm, do i update Nero first? or update firmware to 1.0c first? also.. the firmware is a .exe do i just run that to update it :0? (sorry for the newb questions, i dont wana make a mistake and mess up my drive.
>_< Slight problem firmware 1.0c update installation instructions is in japanese @_@ i have no idea how to install it
Nope no go, same issue i install'd both nero updates and then used a Maxell (Up to 16x) DVD-R, here's the log just incase you want to see it. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 4:24:34 AM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.07 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <OEM CD-ROM F564E >Version: 2.00 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1600AB-22DYA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : OEM CD-ROM F564E atapi Port 1 ID 0 DMA: Off CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On CdRomPeripheral : UD1853B IJM476K 1.0 dtscsi Port 2 ID 0 DMA: Off === CDRom-Device-Map === OEM CD-ROM F564E D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 UD1853B IJM476K F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 447MB (458224kB) Free physical memory: 96MB (98420kB) Memory in use : 78 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.10.2006 ISO compilation 9:42:12 PM #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:42:12 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 9:42:12 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:42:13 PM #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:42:13 PM #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2263519 (503:00.19, 4420MB) 9:42:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 9:42:13 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 9:42:13 PM #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:42:13 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2263520 (2263520) = #2263520/503:0.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263520 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 9:42:13 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4635688960, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2263520 | lead-out | 1 | 0x41 | 0x00 9:42:13 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:42:13 PM #12 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 9:42:13 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:42:13 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 9:42:13 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:42:13 PM #16 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 9:42:13 PM #17 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 9:42:13 PM #18 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 9:42:13 PM #19 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:42:13 PM #20 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x89 0xE0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 9:42:13 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778 Illegal disc 9:42:13 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778 Could not perform start of Disc-at-once 9:42:13 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 4:24:34 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 7/26/2006 10:05:53 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Seem's like i'll need to install the 1.0c update @_@ if only i knew japanese, lol . Is there any place that has english instructions on how to install the 1.0c update?
