1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Please help me once again my burn process keeps failing

Discussion in 'Nero discussion' started by shumway04, Feb 28, 2007.

  1. shumway04

    shumway04 Member

    Joined:
    Jan 24, 2007
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    Hi Please somebody give me some insight. I've posted before and gotten help so I'm hoping someone can help me again. I've updated my Nero to 6.614 (I beleive) I've also added more memory and I'm trying to back up all my movies. Everytime I use my nero and try for maximum my burn process fails. However if I use it at 2% it will allow me to make my backups but it is taking me 1/2 hour for each back up. Before I was able to burn a dvd in only 7-8 minutes max. I'm not even able to pick a writing speed of 4% or 8% (not sure why) can someone please give me some insight on this and advise what I can do for a faster way to backup my dvd's? I'm posting my log below thanks so much for any help.

    1A20

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H652D E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 894MB (915884kB)
    Free physical memory: 213MB (219104kB)
    Memory in use : 76
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    28.2.2007
    Burn DVD Image
    7:54:32 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    7:54:32 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    7:54:32 PM #3 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW TS-H652D running

    7:54:32 PM #4 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    7:55:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286033 (508:00.33, 4464MB)

    7:55:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    7:55:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    7:55:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)

    7:55:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286034 (2286034) = #2286034/508:0.34
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286034 blocks [TSSTcorp CD/DVDW TS-H652D]
    --------------------------------------------------------------

    7:55:00 PM #10 Text 0 File Burncd.cpp, Line 3904
    Can only write at 16x (22,160 KB/s) instead of 18x (24,930 KB/s) to current disc.

    7:55:00 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681797632, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286034 | lead-out | 1 | 0x41 | 0x00

    7:55:00 PM #12 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    7:55:00 PM #13 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:55:00 PM #14 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    7:55:00 PM #15 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    7:55:00 PM #16 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    7:55:00 PM #17 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 16x (22,160 KB/s)

    7:55:00 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:55:00 PM #19 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    7:55:00 PM #20 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:55:00 PM #21 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:55:23 PM #22 Text 0 File Cdrdrv.cpp, Line 1200
    19:55:23.468 - E: TSSTcorp CD/DVDW TS-H652D : Queue again later

    7:55:34 PM #23 SPTI -1176 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x01
    CDB Data: 0x2A 00 00 00 01 C0 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 01
    Buffer x07520000: Len x10000
    0x00 00 01 BA 44 00 04 00 04 01 01 89 C3 F8 00 00
    0x01 BB 00 12 80 C4 E1 00 E1 7F B9 E0 E8 B8 C0 20
    0xBD E0 3A BF E0 02 00 00 01 BF 03 D4 00 00 00 00

    7:55:34 PM #24 CDR -1176 File Writer.cpp, Line 311
    Session fixation error
    E: TSSTcorp CD/DVDW TS-H652D

    7:55:34 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:55:34 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    7:55:34 PM #27 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was 447

    7:55:34 PM #28 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 16x (22,160 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    1A20-
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H652D E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 894MB (915884kB)
    Free physical memory: 213MB (219024kB)
    Memory in use : 76
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    28.2.2007
    Burn DVD Image
    7:56:13 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    7:56:13 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    7:56:13 PM #3 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW TS-H652D running

    7:56:13 PM #4 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    7:56:36 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286033 (508:00.33, 4464MB)

    7:56:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    7:56:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    7:56:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)

    7:56:36 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286034 (2286034) = #2286034/508:0.34
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286034 blocks [TSSTcorp CD/DVDW TS-H652D]
    --------------------------------------------------------------

    7:56:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681797632, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286034 | lead-out | 1 | 0x41 | 0x00

    7:56:36 PM #11 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    7:56:36 PM #12 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    7:56:36 PM #13 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    7:56:36 PM #14 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    7:56:36 PM #15 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    7:56:36 PM #16 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 16x (22,160 KB/s)

    7:56:36 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:56:36 PM #18 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    7:56:36 PM #19 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:56:36 PM #20 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:56:58 PM #21 Text 0 File Cdrdrv.cpp, Line 1200
    19:56:58.015 - E: TSSTcorp CD/DVDW TS-H652D : Queue again later

    7:57:06 PM #22 SPTI -1176 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x01
    CDB Data: 0x2A 00 00 00 01 C0 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 01
    Buffer x07520000: Len x10000
    0x00 00 01 BA 44 00 04 00 04 01 01 89 C3 F8 00 00
    0x01 BB 00 12 80 C4 E1 00 E1 7F B9 E0 E8 B8 C0 20
    0xBD E0 3A BF E0 02 00 00 01 BF 03 D4 00 00 00 00

    7:57:06 PM #23 CDR -1176 File Writer.cpp, Line 311
    Session fixation error
    E: TSSTcorp CD/DVDW TS-H652D

    7:57:06 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:57:06 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    7:57:06 PM #26 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was 447

    7:57:06 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 16x (22,160 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======




    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d
    (Nero Express)
    Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H652D E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 894MB (915884kB)
    Free physical memory: 222MB (227592kB)
    Memory in use : 75
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    28.2.2007
    Burn DVD Image
    8:04:04 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    8:04:04 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    8:04:04 PM #3 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW TS-H652D running

    8:04:04 PM #4 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    8:04:28 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286033 (508:00.33, 4464MB)

    8:04:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD)

    8:04:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AM3
    Disc Application Code: 64, Disc Physical Code: 193

    8:04:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL, DVD-RAM.)

    8:04:28 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286034 (2286034) = #2286034/508:0.34
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286034 blocks [TSSTcorp CD/DVDW TS-H652D]
    --------------------------------------------------------------

    8:04:28 PM #10 Text 0 File Burncd.cpp, Line 3904
    Can only write at 16x (22,160 KB/s) instead of 18x (24,930 KB/s) to current disc.

    8:04:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681797632, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286034 | lead-out | 1 | 0x41 | 0x00

    8:04:28 PM #12 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    8:04:28 PM #13 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    8:04:28 PM #14 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    8:04:28 PM #15 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    8:04:28 PM #16 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    8:04:28 PM #17 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 16x (22,160 KB/s)

    8:04:28 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    8:04:28 PM #19 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    8:04:28 PM #20 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:04:28 PM #21 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:04:50 PM #22 Text 0 File Cdrdrv.cpp, Line 1200
    20:04:50.546 - E: TSSTcorp CD/DVDW TS-H652D : Queue again later

    8:04:57 PM #23 SPTI -1176 File SCSIPassThrough.cpp, Line 289
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x72
    Sense Qual: 0x01
    CDB Data: 0x2A 00 00 00 01 C0 00 00 20 00 00 00
    Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 01
    Buffer x07520000: Len x10000
    0x00 00 01 BA 44 00 04 00 04 01 01 89 C3 F8 00 00
    0x01 BB 00 12 80 C4 E1 00 E1 7F B9 E0 E8 B8 C0 20
    0xBD E0 3A BF E0 02 00 00 01 BF 03 D4 00 00 00 00

    8:04:57 PM #24 CDR -1176 File Writer.cpp, Line 311
    Session fixation error
    E: TSSTcorp CD/DVDW TS-H652D

    8:04:57 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:04:58 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    8:04:58 PM #27 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was 447

    8:04:58 PM #28 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 16x (22,160 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited: Feb 28, 2007
  2. FFsp42

    FFsp42 Regular member

    Joined:
    Feb 5, 2006
    Messages:
    146
    Likes Received:
    0
    Trophy Points:
    26
    Edit out your s/n before someone steals it! It is listed several times in your log. Click on the pen icon in the upper right corner.

    Burn process failed at 16x (22,160 KB/s)

    Too fast. Slow down your burn speed. Rule of thumb, burn at half of the rated speed of your media. In other words, if you're using 16x discs, do not burn faster than 8x. That should help some.

    Also, make sure your machine is clean. Defrag your hdd often and run ccleaner. A defragged hdd will cause some issues with burning. Find ccleaner here: http://www.ccleaner.com.

    Finally, use good media! TY or Verbatims are best.
    Hope this helps!
     
    Last edited: Feb 28, 2007
  3. shumway04

    shumway04 Member

    Joined:
    Jan 24, 2007
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    @FFsp42- Thanks so much for your help and the fast turnaround time. I do need to slow down my speed pls forgive me in advance for being ignorant is there a manaul way to do this? On my dropdown for my writing speed for Nero it only gives me 18X(maximum)then 2X, 1X it won't even give me 4X as an option.

    I do know that the media disc are not good I was using what was left of them then I inted to use sony. Thanks so much
     
  4. shumway04

    shumway04 Member

    Joined:
    Jan 24, 2007
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    HI,
    I figured it out inserted blank media before burning duh but thanks so much for helping me
     
  5. FFsp42

    FFsp42 Regular member

    Joined:
    Feb 5, 2006
    Messages:
    146
    Likes Received:
    0
    Trophy Points:
    26
    @FFsp42- Thanks so much for your help and the fast turnaround time

    You're welcome. Happy to help.

    pls forgive me in advance for being ignorant

    There are no stupid questions....maybe some stupid answers every once in a while ;) Just keep in mind that we all started out the same way at one time.

    I inted to use sony

    Sony's are decent media to use, but the best are Taiyo Yuden or Verbatims, Verbatims being the easiest to get, all depending on where you live. Sometimes you can catch Verbs on sale at a decent price. If you're interested in finding out who manufactured your discs, use this free program: http://dvd.identifier.cdfreaks.com/

    Good Luck!
     
  6. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116

Share This Page