Post your DISC quality scans here 2

@hobbit

heres a scan of one of those RicohJpn 16x+r printables

http://i72.photobucket.com/albums/i196/Cincrob/ricohjpn.jpg

this QC is after i printed on it... i lost teh scan of it before i printed on it.

http://i72.photobucket.com/albums/i196/Cincrob/ricoh1.png

 

all righty now. i got a few scans here
these first 2 are Ritek 8x+r DL d01, burnt at 6x

http://i72.photobucket.com/albums/i196/Cincrob/Ridata1.png
http://i72.photobucket.com/albums/i196/Cincrob/Ridata2.png

this one here is a RicohJPN D01 067 8x+r DL glossy watersheild.
and a pic of the disc after i printed on it.. which is the best i have ever done or seen...

http://i72.photobucket.com/albums/i196/Cincrob/glossy1.png
http://i72.photobucket.com/albums/i196/Cincrob/Alvin.jpg

nnow heres the bad about these.. they wernt DL disc i did but i put them on DL anyway no comperssion at all. kinda a waist but for test purpose well see....
the glossy kinda scaned backwards it looks like did the second layer 1st...looks bad but its playing right now the boys are watching it.

the print job is awsome looks like it was just bought from the store... gonna burn some more of these to see how my drive takes to them...

i did waist one trying to use nero speed to create disc. it didnt handle the layer break. so lost 1 of them..

 

Those Riteks don't look half bad for D01s.

What speed did you burn that RicohJPN D01 at? It looks nasty!

 

i burnt it at 6x.... dont it look like it scan'd backwards? normally the first half has the HIGH PIF's you cna tell the second half looks good... wish ya could zoom in on certain areas on the scans..lol Gonna try another here shortly

 

cincyrob,
What did you burn the first 2 at and with which drive? Those look great and I need to try some of those out just for giggles. hehehe. I may just have some from the Prairie Claus.

Keep 'em coming fellas!!!

cincy can you do a TRT scan on that last disc just for curiosities sake. I wish you had a NEC/Optiarc drive, they do quite well with that test.

...gm

 

With the Riteks, I usually got the high PIEs on the 2nd layer, though once in a while I'd get them on the 1st layer.

 

all 3 were burnt on the LH-18A1P @6x..

i did try to scan the first one with the LH-18A1P and it wouldnt do it. so i used the 16x drive to scan it and it went.. but then i tried again with the 18x and it took also... im at work right now so ill have somemore tonight

 

Couple of new burns & scans,

Here's a new MBI scan, 4x burn on Samsung 203S, 4x scan on liteon 20a1h.

Here's a TY 16x -R burned @ 12x, scanned @ 4x on liteon lh20a1h.

Gotta love those TYs.

 

Hey binkie7!

That is kinda ugly! It took my drives 4-5 discs each before they learned that media, some a lot worse than that one. But the burns got alot better!

 

@Binkie7
good to see ya stop by and see us low lifes here in the scan thread...lol just jokeing guys...

@hobbit

the ricohjpn glossy that i printed on and posted above... deader than a doorknob.. my son went to play it about 30 seconds after playing it frooze up... put in 2 other players did the same thing??? gonna have to get the other one i burnt on and try it???? you had that problem with them?

 

ok got some scans here on some 16x+r hubprintabl TY's gotta love this stuff..

http://i72.photobucket.com/albums/i196/Cincrob/Firdaythe13thI.png
http://i72.photobucket.com/albums/i196/Cincrob/Firdaythe13thII.png
http://i72.photobucket.com/albums/i196/Cincrob/Firdaythe13thIII.png

gonna do a couple DL's today will post them when done..

 

@cincyrob

I've found that if I get PIFs above 4, I'm going to have pixelation, above 10 and I'll have some freezing, much above that and the movie stops.

This is with scans on my lite-ons, I haven't done the extrapolation with the Benq.

 

heres a burn on the 2.4x DL verb minus the spike at the break its a nice scan
same movie scanned at different speeds
4x scan

6x Scan

disc was burnt @4x on my LH-18A1P

getting ready to burn another on same media gonna burn at 2.4x and see what i get

 

That layer break looks like a killer to me cincyrob.

Can you play that disc through the layer brake or does it crap out?

I've gotten my best results with the newest drives I have, that is the Samsung 203b. My lite-ons, even with the updated f/w couldn't do as well as my sammy.

 

@hobbit
the boys watched it and it seems ok.. that was the very first 2.4 DL verb this drive has burnt.. now here is the second one what ya think of this??

Stats
Scan

this was burnt at 2.4x scaned @ 6x... i cant get my LH-18A1P to scan the DL's lower

 

For a dl, that's great!

That jitter spike at the beginning could be from scanning @ 6x. An average jitter of 8.55 is quite good, for me it would be great.

One way I look at totals is to cut them in half consider if it was a sl.

 

Here's a MIS Verb 2.4x DL burned @ 4x with Nero 7, 4x Scan.

Link

Got a funky jitter scan. Once it hit the layer break it sounded like the reading head was smacking against it's stop, like a hard drive with errors.

Going to try and see if it'll play.

 

Here's a couple of new 8x MBI DLs. Totals are on the high side but maxes are still in line.

Both burned @ 4x on Samsung 203B, scanned @ 4x on Lite-On LH-20A1H

First

Second