Post your DISC quality scans here 2

pluged it into the extra Esata plugin.. damn near shut my system down.. made all kinds of noise, mouse stoped working had to hit reset.

check this out. i pluged it back in its original slot.. works perfect????go figure??

 

ASUS P5Q Deluxe is next. if not the premium...lol

 

Rob

I'm with greensman,before doing anything drastic have you tried to just swapping out the SATA cable you could have a wire in that cable broken and not making contact correctly. Reseating it may have made it connect again and it might go out again. Cheap way to check. That is if you haven't already done so. JM2C.

 

i checked the cable, looks fine. i think it the sata pluggins. ive had to change out 3 different cables now..

GM. 2 of them were the cables that came with the mobo... and the other one was one that came with a drive.

 

got some scans for you guys. messing with some of the "lesser" known media out there or less liked would better describe it. lol.

Pioneer 112D@ Pioneer 112L 8.25
IMGBURN @8x
MBIPG101R05 (Imation DVD+R 16x)



Sony/NEC/Optiarc AD-7200S
IMGBURN @8x
MBIPG101R05 (Imation DVD+R 16x)



...gm

 

Got a couple more for you fellas. I know they're a little small but at least it gives some idea how the Pioneer 112L performs. I like the AD-7200 but it has some BIG shoes to fill if you ask me. L@@K at the JITTER on the SONY08D1 !!! WOW....

Pioneer 112L 8.25
IMGBURN @ 8x
CMC MAG AM3



Pioneer 112L 8.25
IMGBURN @ 8x
SONY08D1



....gm

I'll do some more later with the AD-7200S..

 

For you CMC MAG doubters out there.... Look at that Jitter too... it's pretty danged good if you ask the GM.



I just had to post another one for the sake of it. I'll try to get a LARGER image next time so we can see how the media does to the very edge of the disc.

...gm

edit:
@RedRob,
I don't see 4 SATA cables going bad within 2 months or so. I don't see all of your SATA connections doing that either. lol. It could be a driver issue or even a "connection" issue but you've already stated that you checked that more than once. I can't help but blame the mobo itself. For some reason you've had these monumental problems with the P35-DS3R but I blame nothing on you of course. It's just bad luck or the PC gods have it out for you.. hehehe.

 

i got it working right now but it aint right i can tell by the way its burning. im gonna switch the clot again use the one right under my hdd cable. only onei havent tried yet.... but yea i do not like this board. the longer i have it the more silly things happen, even with it acting funny i got some good scans out of them.. i will post some shortly...

i ve been playing COD4 the past hour.. my gpu temp got up to 59c. normaly 48-50c...lol let it cool down and do some burning again...

 

Yes sir!! you got a better f/w for our pleasure??

And btw they were small because the image was small and NOT something dodgey!! Little kiddy movie.... with powers of legend....

....gm

 

these were all burnt on the 7200s with the 1.06bt f/w.

got some more to post but im eatin popcorn, haven an adult beverage and watching the football game

 

Aye.. forgot to post the f/w version... sorry bout that.. lol.

Liggy's bitsetting 1.06bt f/w.

...gm

Nice scans there RedRob...

 

Finally got around to "doing" some TY media.

Sony/NEC/Optiarc AD-7200S (Liggy's 1.06bt f/w)
IMGBURN @ 8X
YUDEN T02 (Sony DVD+R [MIJ])



TYG03 (OEM-Taiyo Yuden)



Pretty good stuff if you ask me. Both are FIRST burns with the media IIRC. I'm almost positive that's it. Can't say any more about TY..

btw you guys use much of the T03 stuff?? I've got some and found it last night. Only a few pieces but was wondering if you've used any and how it performed. I may take this discussion to the docTY thread.

....gm

 

i dont think i have ever used any of the T03(16x-r) TY's.
i have how ever had 100 of the hub printable YUDEN000T03 (16x+r).
if ya remember when i first got my 1 of 3 LH-18A1P drives i waisted about 25 or so cause it would burn to the media. but after that i had great success rate with them.. i will try and find some of them and re scan them and see what i get.....

tbh im gonna order me some of the 8x+r ty's and some of the 16x-r ty's. and give them a try....i know this optaric is loven the 16x-r verbs i have.

oh you want a scan..lol
here is one on the 7200s set to burn at 18x speed. wasnt a full disc so it didnt get that high.

create scan here. no jumping around thats a plus.


scan with the 7200s


scan with LH-18A1P

way better scan with the litey.

 

I just did a copy of a copy-Batman Begins done in )Oct 05. Original backup was made using DVDX-copy gold Xpress copy & 321gone on a TDK CMC Mag E01-LOL-no clue then?? I burned the new copy with NEC-Optiarc AD-7200S on a 16X Riket F16-and got a 96 on the qscan. go figure

 

garmoon,

I had lent my friend 12 DVDs because he was out. He gave me back 12 Ritek F-16s! They suck! With the verbs even when I just do random checks all are 95 percent quality or above, even with the same DVD I just burned on the F-16! I've burned 3 F-16s so far and all are "0" Percent Quality. I'm done with Ritek for a while anyway! These just came last Friday from Newegg!

Russ

 

@Russ

I use th Office Depot disc for my daughter and have had very few problems with them over the years. I use Verbs and TYs for my backup and have the same success. I was just surprised that the score was so high. gary

 

Let's try a triple using Office Depot Disks.

And here's the results.