Post your DISC quality scans here 2

for some reason nero cd/dvd speed version 4.7.7.16
wont let me do a Qualtiy scan on it
but i can do create disc. and it will let me overburn the CMC-MAG AM3 to 18x the 7200S will only do them at 16x.

this here is what im wanting every time. out. look at the buffer,speed and cpu usage.


not to bad i guess for the media choice. im not haven the luck with these that you are GM.


the entire ime this was burning i had dvd-rebuilder running and surfing the net(for a sata hdd seing i dont have a real one...lmao)

i have it in my 20x litey now scanning will post shortly

if iremember correct when i first got this sammy i messed with the buffer,and i thinkmaybe Garmoon told me how.... wanna tel me again??? i dont remember..lol

 

Rob it's a change in the registry. For the SAmmy that is...

Try a burn at 8x-12x with those AM3's!! I bet you'll like them a bit better. lol. btw the burn you did isn't that bad but like you I'd want to see the PIE's a little lower and the average Jitter <9.0 would be nice too.

I don't normally do this but you gotta go here and here.

....gm

 

that stuff is to comical... i had to leave i would get in trouble if i posted there...lmao HERES YOUR SIGN!!!!!!!!!!!!! "IM STUPID"

 

@cincyrob

It wasn't garmoon, cincy. I don't have a Sammy and I don't intend to let you or greensman give me a reason that I might need one. I am also finished with wasting perfectly good Ritek discs playing with Nero Speed. The scans look fine for me and I'm not having any playback issues or copy either. I can't bear to play with my TY or Verb media on these tests anyway. And that's what I use for my burns. I give the Riteks to my daughter. Your last create disc scan looks great. Save your discs. LMAO

 

LMAO!!!!!!

i keep every disc i burn(well not the test ones) im just trying different media to see what my drives like other than verbs and TY's.
ill never do a so called test on a TY no need to test those puppies.
now verbs there just so cheap and plentifull its hard not to experiment with them....
i am with GM on the verbs out right now there just isnt something right about them. think they might be messin with the DYE formula....
im actuall down to my last 50 verbs right now. and those are a good 8 months old so im sure they are from the "old school verbs"

hey you should try one of these samsung SH-S203B's pretty nice drive. i know one thing. i use my 18x litey for scanning. i use this sammy for reading and ripping i think its the best reader/ripper i have. ive yet to find anything i cant rip.... there cheap too.(well you wont get it as cheap as i did) but you better hurry you know all the good drives go fast and once there gone you cant find them any more...

hows that greeny? good sales pitch????

 

dammit moony I have to give you another FREE lesson..... again... hehehe.

[lesson]You can burn an image from your HDD if you choose the Create Disc tab then run test>>burn image file... [/lesson]

NOW get to burning that "image file" of choice and show us the scans!!! hehehe.

btw.... don't buy a Sammy, get another LITEON or PIONEER or sony/NEC/optiarc.......... heheheheehehehehe.

...gm

 

not to correct ya gm. but if he hits run test thats where he is waisting a disc...
once he clicks creat disc. in the setting box area. you choose your burn speed the burn image. then it will open up the window to select your image to burn. chose it and then it does its thing and burns away..

look up AT the one i did. you'll see in settings i have the burn image checked. that lets you burn the image of your choice. and not just a test and waist a disc.

now lesson over. gotta watch them sub teachers.....lol just jokeing GM

 

@Cincy

See I learned something cincy and gman. About not wasting a disc. I'm not good about reading instructions until something bad goes wrong. I did Install DVDRebuilder today and ran KillBill 1 and used its own HC encoder in 1 click mode. I guess I should have run it thru Voblanker to get rid of all the crap but the movie. The whole disc took 99 min to process the AnyDVDRip. Bad ? Good time? ImgBurn burned files. Disc looked good on monitor but haven't tried HD TV yet. I need another Lite_On like a hole in the head. I've got two in a cardboard box now, probably don't have 2 hr apiece time used. As for ripping, both the Nec 7200 and Litey 20A1S have not balked a reading anything- I have an always reads fall back-my external LG 2166. If it can't read a disc then nothing can. The 2 BenQs 1650s I used to use had lots of trouble reading scratched or smudged discs. I'm pretty much thru with all these test-BUT since nothing out is worth backing up I may play a bit still. I'm slowly learning that most DVD RW drives are pretty acceptable when it come to playback and copyability.

@LOCO How you doing man, haven't talked to you lately. All have a good weekend. I know I'm going to.

EDIT: Are you telling me that when you run the create disc test, you can do it without writing a byte to the blank and still have a usable blank after the test? Cause if you can, I can't. LOL I either get a playable disc when burn image is selected or a I get a booktyped disc that's useless and fully burned as a data disc I assume. Either way to me it's a waste of a disc. Cause I didn't need the copy to start with.

 

I missed something I guess. lol.

Moony I didn't realize that burning an image was wasting one for you. In this instance then yes it's gonna burn the disc and NOTHING you can do will bring it back. I don't like "testing" a disc just for the sake of it. lol. I like to as least have something usable when I'm done. lol.

So RedRob... who is confused here?? I think I explained it correctly.

This one shows the "tab" Create Disc I was talking about.


And this one shows the Run Test selected in the menu and then hovering over the Burn Image File to browse for an ISO image.


I'm not trying to be a smarty pants here but I do want to convey the correct message and help with the correct directions. Maybe the directions were a little vague before but these "screenies" should help clarify my "thoughts".

....gm

 

garmoon this would be an easier process if your doing the movie only with DVD Rebuilder.

1. dvdfab decrypter to rip (freeware) (doing the movie only)
2. encode with DVD Rebuilder
3. burn with Clonedvd or imgburn

your times are about right with the system you have

 

@Zoso and Creaky

Thanks for the info; that makes good sense. I have DVDFabPlat. DVDRebuilder was easy to use. The guide I had was old and didn't match the view I was seeing.First try was a success. Actually the thread it brought me to at AD was so outdated it said I had to download or buy all these other programs but Creaky was posting to someone that its HC encoder worked wonders so I tried it. Thanks Creaky. Some one needs to put a link to the newest versions of the newest guides.

@LOCO

Leave it to the manual man to come thru and answer my question first. I read thru it and had everything set right except priority was set to normal,not high. I didn't think you could use the disc again after the test. BUT I did read that if you use DVD-R you can use the Simulate test-I don't have any -R discs. The Drives you ask about are SATA. All ODD and HDD were SATA with new pc. The original that came with the Dell was some exotic Phillips-Litey that I removed and the other was a misbought Optiarc Lite_On 7191S was supposed to be the NEC Optiarc that I have now-I didn't get the memo LMAO . So now I'm using the NECOptiarc 7200S and the Litey 20A1S. And very satisfied with both. If I get the red a$$ I can change a drive in a min with this case. Neatest hugest case I ever saw but it is big and roomy.

@gm and cincy

Yeah to me it's a wasted disc if no one wants it and I was running a test on it. I just chuck 'em. Now when I first got this behemoth I burned about 50 tests of different movies and saved them for gifts. I'll try another test and see if I get better results in high mode.

Later all happy Saturday

 

much better pulling off the second hdd. but im gonna go back to the old ways and do a few on the fly

 

now heres a scan.
i went disc to disc on this one didnt rip to hdd.source drive samsung SH-S203B, burning drive AD-7200S




heres the same disc scaned on LH-20A1S


this is a 2 disc set. im doing the second disc now. same way on the FLY

heres disc 2
General Information
Drive: LITE-ON DVDRW LH-20A1S
Firmware: 9L08
Disc: DVD-R (MCC 03RG20 )
Selected speed: 4 X
PI errors
Maximum: 9
Average: 1.08
Total: 19294
PI failures
Maximum: 3
Average: 0.00
Total: 549
PO failures: n/a
Jitter
Maximum: 10.2 %
Average: 9.29 %
Scanning Statistics
Elapsed time: 15:38
Number of samples: 124439
Average scanning interval: 1.15 ECC
Glitches removed: 0

damn didnt save the scan... lol

 

wooo-hoooo!! That's a "HOF" burn there RedRob..

Ok.... /me goes off to do some burns and scans... got way behind this last couple of weeks. lol.

....gm

 

Just more proof not to waste any more disc for these crazy tests. A 99 and a 95 on same disc. j/k guys. LMAO

@Rob I burn on the fly quite often when I'm giving something away.

 

garmoon
on the fly is all i ever used to do. and then scan them.
ive just resently(past 6months or so) started doing the burns with nero cd/dvd speed.

you do know you can still burn the way you normally do and then just do the quality scan on that burn.. thats what my last 2 post were. 2 on the fly burns and then scaned them... no waist of a disc what so ever.

got a couple more to do also. those 2 up above were actually some 16x-r printable verbs. i got a good batch of those bout 50 or so more left.

GM
im actually glad i have figured out all my so called problems with my build and i can actually do what i built it for. burning!!!!!!

i hit the dive yesterday. got a couple hundred cases. alot of Wii cases. about 5 GC cases

 

i gave up burning on the fly pretty much unless I'm in a hurry. the quality scores are much better burning a file from the HDD

 

i honestly cant say that. even when i use dvd-rebuilder. i dont get no where near the scores i don when on the fly.

those two scans i did above is a DL disc that i used clonedvd2 to transcode it and fit to a dvd5. ill run it through dvd-rebuilder with2 passes, and burn to the same disc(well a new one that is..lol)
and post it.brb in 45 mins or so with the scan..(no i dont have a 30 min OC'd Quad) LMAO

EDIT...
didnt miss it by much. 47mins 2 passes. heres the log. scan to come, burning now.

[15:45:34] Phase I, PREPARATION started.
- DVD-RB v1.26.0
- AVISYNTH 2.5.6.0
- CCE 2.70.2.4 encoder selected.
- Source: NEW FOLDER
- VTS_01: 3,657,389 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 282,688 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 59.1%
- Overall Bitrate : 3,616/2,892Kbs
- Space for Video : 4,162,946KB
- HIGH/LOW/TYPICAL Bitrates: 4,016/400/2,892 Kbs
[15:47:56] Phase I, PREPARATION completed in 2 minutes.
[15:47:56] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Extracting Video for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Extracting STILLS for VTS_01 segment 36
[16:24:10] Phase II ENCODING completed in 37 minutes.
[16:24:10] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 5 VOBID 2 CELLID 1
- Rebuilding seg 6 VOBID 2 CELLID 2
- Rebuilding seg 7 VOBID 2 CELLID 3
- Rebuilding seg 8 VOBID 2 CELLID 4
- Rebuilding seg 9 VOBID 2 CELLID 5
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 10 VOBID 3 CELLID 1
- Rebuilding seg 11 VOBID 3 CELLID 2
- Rebuilding seg 12 VOBID 3 CELLID 3
- Rebuilding seg 13 VOBID 3 CELLID 4
- Rebuilding seg 14 VOBID 3 CELLID 5
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 15 VOBID 4 CELLID 1
- Rebuilding seg 16 VOBID 4 CELLID 2
- Rebuilding seg 17 VOBID 4 CELLID 3
- Rebuilding seg 18 VOBID 4 CELLID 4
- Rebuilding seg 19 VOBID 4 CELLID 5
- Rebuilding seg 20 VOBID 4 CELLID 6
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 21 VOBID 5 CELLID 1
- Rebuilding seg 22 VOBID 5 CELLID 2
- Rebuilding seg 23 VOBID 5 CELLID 3
- Rebuilding seg 24 VOBID 5 CELLID 4
- Rebuilding seg 25 VOBID 5 CELLID 5
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 26 VOBID 6 CELLID 1
- Rebuilding seg 27 VOBID 6 CELLID 2
- Rebuilding seg 28 VOBID 6 CELLID 3
- Rebuilding seg 29 VOBID 6 CELLID 4
- Rebuilding seg 30 VOBID 6 CELLID 5
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 31 VOBID 7 CELLID 1
- Rebuilding seg 32 VOBID 7 CELLID 2
- Rebuilding seg 33 VOBID 7 CELLID 3
- Rebuilding seg 34 VOBID 7 CELLID 4
- Rebuilding seg 35 VOBID 7 CELLID 5
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 36 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[16:32:55] Phase III, REBUILD completed in 8 minutes.

Done.
[16:32:55] PREPARE/ENCODE/REBUILD completed in 47 min.