Hi, every time I burn a data DVD on Nero 7 it fails. I have no problem with burning CDs. No idea if it's the hardware or software. Any ideas? Thanks guys! Here is the log: --------------- Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.0.0.0 Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TSSTcorp CD/DVDW TS-H552U>Version: US06 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD1600JS-22MHB0 atapi Port 2 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp CD/DVDW TS-H552U D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 503MB (515540kB) Free physical memory: 80MB (82440kB) Memory in use : 84 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.3.2007 ISO compilation 23:46:54 #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 23:46:54 #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 23:46:54 #3 Text 0 File Reader.cpp, Line 124 Reader running 23:46:54 #4 Text 0 File Writer.cpp, Line 113 Writer D: TSSTcorp CD/DVDW TS-H552U running 23:46:54 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 23:46:54 #6 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 23:46:55 #7 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2267087 (503:47.62, 4427MB) 23:46:55 #8 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 23:46:55 #9 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TSSTcorp CD/DVDW TS-H552U, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 23:46:55 #10 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:46:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2267088 (2267088) = #2267088/503:47.63 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267088 blocks [D: TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 23:46:55 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [D: TSSTcorp CD/DVDW TS-H552U] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4642996224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2267088 | lead-out | 1 | 0x41 | 0x00 23:46:55 #13 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 23:46:55 #14 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 23:46:55 #15 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 23:46:55 #16 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 23:46:55 #17 Phase 32 File dlgbrnst.cpp, Line 1724 Simulation started at 16x (22,160 KB/s) 23:46:55 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 23:46:55 #19 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode for Multisession 23:46:55 #20 Text 0 File MMC.cpp, Line 21541 Set BUFE: Super Link -> ON 23:46:55 #21 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 23:46:55 #22 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 23:47:11 #23 Text 0 File Cdrdrv.cpp, Line 1195 23:47:11.796 - D: TSSTcorp CD/DVDW TS-H552U : Queue again later 23:52:13 #24 Text 0 File WriterStatus.cpp, Line 116 <D: TSSTcorp CD/DVDW TS-H552U> start writing Lead-Out at LBA 2267088 (2297D0h), length 0 blocks 23:52:13 #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 23:52:13 #26 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 2267087 23:52:15 #27 Phase 133 File dlgbrnst.cpp, Line 1724 Writing short lead-out 23:52:34 #28 Phase 33 File dlgbrnst.cpp, Line 1724 Simulation completed successfully at 16x (22,160 KB/s) 23:52:35 #29 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 16x (22,160 KB/s) 23:52:35 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 23:52:35 #31 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode for Multisession 23:52:35 #32 Text 0 File MMC.cpp, Line 21541 Set BUFE: Super Link -> ON 23:52:35 #33 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 2267104 DVD high compatibility mode: Yes 23:52:35 #34 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 2597CF h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2597E0 h Start sector number of the next Border-In: 264F80 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 25 97 E0 00 26 4F 80 - 00 00 00 00 00 00 00 00 .%...&O......... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 23:52:45 #35 SPTI -1066 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x53 00 00 00 00 00 22 97 D0 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 23:52:45 #36 CDR -1066 File ThreadedTransferInterface.cpp, Line 1783 Invalid field in command D: TSSTcorp CD/DVDW TS-H552U 23:52:45 #37 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783 Could not perform start of Disc-at-once 23:52:45 #38 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 23:16:24 File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25/08/2006 05:47:00 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 0, size=101504 bytes, created 30/08/2005 17:24:38 (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
"23:52:45 #37 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783 Could not perform start of Disc-at-once 23:52:45 #38 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 16x (22,160 KB/s)" Burn at 8X speed and turn off disc at once "on the fly" and see how you go. Cheers.
This version is full of bugs, uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install this version 7.5.9.0 from here http://www.filehippo.com/download_nero_7_premium/ You have a lot of memory in use, dont multitask while burning Latest firmware is USO7, from here http://www.samsungodd.com/Lib/popup...ad&fname=200511300832405631_TS-H552U_US07.BIN
updated nero and flashed drive, and now the burning goes well at 8x, but not at 12x. And after burning I can't see contents of DVD-ROM, which never happened with CDs. To fix that I have to reboot, and then all's ok. Any thoughts on why?