hi im a newbie first time on but have learned from all of you have tried different versions of nero same problem can burn disc at once but cannot burn strait from encoding computer freeces after lead in here is logWindows XP 5.1 also tried different media verbatim does same thing would be thankful ********** Nero Recode 2 ********** Version: 2.2.6.17 Project type: Copy entire DVD Target size: DVD5 (2282925) 22:11:30 File LangStreamPatcher.cpp, Line 56 Command table patching started... 22:11:30 File LangStreamPatcher.cpp, Line 133 All tables successfully patched! Burn settings: Target: SONY DVD RW DRU-810A Number of copies: 1 Write speed: 0 KB/s Temp folder: C:\Documents and Settings\Owner\Desktop\lyletemp (132216733696 bytes free) Direct burning: false Target media: DVD R/RW, DVD DL, DVD-RAM Shutdown when finished: false Advanced Analysis: false Compress Adaptive: false 22:11:59 File burn_dvdfiles.cpp, Line 231 Compile DVD: init VTS_01 Title Vobs [12952 vobus] 4463.41MB -> 4458.69MB [R 1.00] Video: 3904.82MB, extra: 553.87MB Audio: 2 streams 0. 0. Dolby Digital 5.1-ch English 366.93MB [enabled] 1. 1. Dolby Digital 2-ch English- Director's Comment 156.85MB [enabled] Subpicture: 1 streams 0. 0. English 4.79MB [enabled] 22:11:59 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 22:12:15 File NeroRecorderBase.cpp, Line 488 Writing to disc: DVD-R 22:12:15 File NeroRecorderBase.cpp, Line 502 Free capacity on disc: 2286467 sectors (2298496) 22:12:15 File burn_dvdfiles.cpp, Line 479 Compile DVD: burning 2286467 sectors (2282925 required) 22:12:15 File burn_dvdfiles.cpp, Line 656 Compile DVD: adjust target size to 4465.76MB (4463.55MB obtained) 22:12:15 File burn_dvdfiles.cpp, Line 524 Compiling DVD Volume started 22:13:42 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_2.VOB 22:14:51 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_3.VOB 22:16:02 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_4.VOB 22:17:13 File NeroRecorder.cpp, Line 593 Added extra file VTS_01_5.VOB 22:17:32 File burn_dvdfiles.cpp, Line 1058 Compile DVD: finished VTS_01 Title Vobs VTS_01 Title Vobs: Original 4463.41MB -> Expected 4463.41MB -> Output 4463.41MB Finished error -0.00MB Ratio encoded = 0 Original encoded = 12952 Slide encoded = 0 StillImage encoded = 0 Output extra size = 542.76MB Source video size = 3920.64MB Pictures Modified [I 0] [P 0] [B 0] 22:17:34 File burn_dvdfiles.cpp, Line 547 Compile DVD: completed successfuly (4463.55MB) 22:17:34 File NeroRecorderBase.cpp, Line 1096 Burning 9 files with total size of 4680372224 bytes on hard disk 22:17:34 File burn_dvdfiles.cpp, Line 1152 Compile DVD: begin copy 1 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 6.6.1.15 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\Nero\ Application: Ahead\Nero Recode Internal Version: 6, 6, 1, 15 Recorder: <SONY DVD RW DRU-810A> Version: 1.0f - HA 1 TA 1 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : ST3160212A atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-RW GWA-4165B atapi Port 3 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-RW GWA-4165B E: CDRom0 SONY DVD RW DRU-810A F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 383MB (392560kB) Free physical memory: 163MB (166988kB) Memory in use : 57 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.4.2007 NeroAPI 10:17:34 PM #1 Phase 112 File APIProgress.cpp, Line 275 DVD-Video files reallocation started 10:17:34 PM #2 Phase 114 File APIProgress.cpp, Line 275 DVD-Video files reallocation completed (no file modified) 10:17:34 PM #3 Phase 111 File APIProgress.cpp, Line 275 DVD-Video files sorted 10:17:34 PM #4 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:17:34 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:17:34 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:17:34 PM #7 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 10:17:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285887 (507:58.37, 4464MB) 10:17:35 PM #9 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 10:17:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: SONY DVD RW DRU-810A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 10:17:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:17:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2285888 (2285888) = #2285888/507:58.38 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285888 blocks [SONY DVD RW DRU-810A ] -------------------------------------------------------------- 10:17:35 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681498624, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2285888 | lead-out | 1 | 0x41 | 0x00 10:17:35 PM #14 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:17:35 PM #15 Phase 24 File APIProgress.cpp, Line 275 Caching of files started 10:17:35 PM #16 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 10:17:35 PM #17 Phase 25 File APIProgress.cpp, Line 275 Caching of files completed 10:17:35 PM #18 Phase 36 File APIProgress.cpp, Line 275 Burn process started at 16x (22,160 KB/s) 10:17:35 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:17:35 PM #20 Text 0 File DVDR.cpp, Line 2846 Recording mode: Sequential Recording Mode 10:17:35 PM #21 Text 0 File DVDR.cpp, Line 3002 Start write address at LBA 0 DVD high compatibility mode: Yes 10:17:35 PM #22 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:34:30 PM #23 SPTI -1114 File SCSIPassThrough.cpp, Line 178 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 06 00 00 00 20 00 00 00 Sense Area: 0x70 00 06 00 00 00 00 12 00 00 00 00 29 Buffer x15330c40: Len x10000 0x00 00 01 BA 44 00 5C 89 C4 99 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 4F 2B A1 28 6A 20 45 51 E3 0x5A 30 48 B7 66 C7 0B E5 CE 7F 04 07 C7 77 B9 1F 10:34:30 PM #24 CDR -1114 File Writer.cpp, Line 281 Reset occurred F: SONY DVD RW DRU-810A 10:34:30 PM #25 Text 0 File DVDR.cpp, Line 3246 EndDAO: Last written address was 1535 10:34:30 PM #26 CDR -1076 File WriterStatus.cpp, Line 162 Disc changed F: SONY DVD RW DRU-810A 10:34:30 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 10:34:31 PM #28 Phase 38 File APIProgress.cpp, Line 275 Burn process failed at 16x (22,160 KB/s) 10:34:31 PM #29 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:34:34 PM #30 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 10:34:34 PM #31 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 11/3/2005 4:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 4:00:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 3, 14, 1, size=99456 bytes, created 4/12/2005 11:07:50 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 14, 1, size=29056 bytes, created 4/12/2005 11:07:30 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 14, 1, size=8704 bytes, created 4/12/2005 11:07:54 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 22:34:35 File NeroRecorderBase.cpp, Line 906 Burn failed (3) 22:34:35 File burn_dvdfiles.cpp, Line 301 Compile DVD: exit
your version of Nero 6 is not the stablest version.... 6.6.0.18 is the most stablest version of Nero 6 and I would update it to that version. Here's how: Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot! install package one: http://www.filehippo.com/download_nero_burning_rom/?539 then install package two: http://www.nero.com/nero6/eng/Patch_for_NVE3.html Do NOT install InCD! Will explain later. reboot and you're good to go! also I would use better media. Stick with the MIJ rule (Made In Japan). Look for the MIJ on the label of the box of spindle (Taiyo Yuden, Sony, Maxell, and some Fuji)... the only exception to this rule is Verbatim, which is top notch media but made in Taiwan/Singapore and the only non MIJs I will use. using too much memoroy.... no multi tasking, no internet and shut down unnecessary programs running in the background taking up memory! Adding more RAM would be nice! you are using RITEK disks....some members like them but there are better quality disk that you can use.... and you are burning too close to the outer edge of your disk .... burn no closer than 4400MB ... some members even stop it at 4300MB. you are burning at maximum speed..... burn no higher than 8x (half the rated speed of your 16x disk) you have Roxio/Sonic on your computer with Nero! With some computer they clash! If you are having problems with Nero then it's a good chance they are having issues with eachother. Uninstall InCd also! when you update Nero to version 6.6.0.18 do not install InCD! InCD and Roxio/Sonic are programs that Packet Writing. .Packet writing utilities are notorious for interfering with burn processes, as the way it works is to continually poll the burner to check for new media. This prevents the burn application gaining exclusive access to the burner, and sense code errors will happen - every time. Get rid of all packet writing utilities. They are more trouble than they are worth. Run Roxio Zapper to make sure there are no traces of Roxio/Sonic on your computer when you uninstall: http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml