sometimes the datas i burn are corrupted or cannot be open. i tried many kinds of cd, sometimes it works sometimes it will not work. i burn avi formats.
are u burning .avi files with the nero data burner, becuase if you do it wont work and i own nero ultra edition 6 and i dont thik nero supports avi files.
here is my log 3:37:34 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 3:37:34 PM #3 Text 0 File Writer.cpp, Line 127 Writer TEAC CD-W58E running 3:37:34 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 3:37:34 PM #5 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 3:37:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359848 (79:59.73) Last address to be written: 344561 (76:36.11) 3:37:34 PM #7 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 3:37:34 PM #8 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: TEAC CD-W58E; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 3:37:34 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 344562 (344562) = #344562/76:34.12 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 344560 blocks [TEAC CD-W58E ] -------------------------------------------------------------- 3:37:34 PM #10 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to TEAC CD-W58E on a CD-R media 3:37:34 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder TEAC CD-W58E for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 705970176 3:37:34 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 3:37:34 PM #13 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 3:37:34 PM #14 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 3:37:34 PM #15 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 8x (1,200 KB/s) 3:37:34 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 3:47:16 PM #17 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 3:47:19 PM #18 Text 0 File Mmc.cpp, Line 13141 <TEAC CD-W58E > start Close Session 3:47:53 PM #19 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 8x (1,200 KB/s) 3:47:54 PM #20 Phase 78 File dlgbrnst.cpp, Line 1818 Data verification started 3:50:33 PM #21 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file Naruto . 091.avi 3:50:34 PM #22 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file Naruto . 090.avi 3:50:42 PM #23 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file Naruto . 089.avi 3:50:42 PM #24 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1298 Status summary Total files=5, identical=1, different=0, inaccessible=3, skipped=1. 3:50:42 PM #25 Phase 81 File dlgbrnst.cpp, Line 1818 Data verification failed Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) please help....
hi kg21, Can you post the entire log without your nero serial (edit out it should start with 1A2) so we can see the entire process per your log. Then we can give you a better answer as what may be the issue.
here is the entire log without the serial... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 7/13/2003 2:49:42 AM Nero version: 6.0.0.0 (Nero Express) Recorder: <TEAC CD-W58E> Version: 1.0A - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 1280kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TEAC CD-W58E >Version: 1.0A - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On CdRomPeripheral : TEAC CD-W58E atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 383MB (392688kB) Free physical memory: 195MB (200616kB) Memory in use : 48 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.7.2005 CD-ROM (ISO) 3:37:34 PM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:37:34 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 3:37:34 PM #3 Text 0 File Writer.cpp, Line 127 Writer TEAC CD-W58E running 3:37:34 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 3:37:34 PM #5 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 3:37:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359848 (79:59.73) Last address to be written: 344561 (76:36.11) 3:37:34 PM #7 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 3:37:34 PM #8 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: TEAC CD-W58E; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 3:37:34 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 344562 (344562) = #344562/76:34.12 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 344560 blocks [TEAC CD-W58E ] -------------------------------------------------------------- 3:37:34 PM #10 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to TEAC CD-W58E on a CD-R media 3:37:34 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder TEAC CD-W58E for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 705970176 3:37:34 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 3:37:34 PM #13 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 3:37:34 PM #14 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 3:37:34 PM #15 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 8x (1,200 KB/s) 3:37:34 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 3:47:16 PM #17 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 3:47:19 PM #18 Text 0 File Mmc.cpp, Line 13141 <TEAC CD-W58E > start Close Session 3:47:53 PM #19 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 8x (1,200 KB/s) 3:47:54 PM #20 Phase 78 File dlgbrnst.cpp, Line 1818 Data verification started 3:50:33 PM #21 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file Naruto . 091.avi 3:50:34 PM #22 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file Naruto . 090.avi 3:50:42 PM #23 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file Naruto . 089.avi 3:50:42 PM #24 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1298 Status summary Total files=5, identical=1, different=0, inaccessible=3, skipped=1. 3:50:42 PM #25 Phase 81 File dlgbrnst.cpp, Line 1818 Data verification failed Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) thanks matt...
what kind of media are you using as your burner doesn't like your choice. your version of nero is old. Update to the latest version 6.6.0.15 (I can only vouch that 6.6.0.14 works properly so I suggest using that one until results are back for 6.6.0.15. Also try using nero vision express. wow update your nero to get the latest WinASPI as yours is about a year out of date. Before you do any updating delete your current version of nero using http://nero.com/us/Clean_Tools.html . Reboot then do a fresh install. Do not install incd as it is a packet writing software and will constantly try to access your drive while using any software to burn cds. Burning avi in data mode are you trying to watch them on a stand alone player? If so as i said earlier use nero vision express as it automatically format the files to vcd compliant (mpeg) and as long as your player supports vcd(s) you should have no problem as it will play them in file mode (screen will say file mode before the avi file starts to play). Try the steps I stated and report back to see if that solved your problem. Oh instead of trying to use the nero verifier (not many have luck with this) try using dvdinfopro. You can find it using a google search.
