Hi, I just got a dvd burner for christmas. I am tring to back up white chicks. Whenever I burn a copy (with the help of anydvd), it will freeze in about 12-20% or with clonedvd(2) it will freeze in about 80%. The disk is brand new. I have tried burning with no success with: Intervideo DVDCOPY DVD Shrink Dvd Decryptor CloneDvd CloneDVD2 I am using dvd-r disks. All they say on them is "Value Disk". I bought those from Office Max. I have blown through about 10 disks using different burning methods and hope somebody could help me.
Hello kurtucky, your reply of yes on flip218's questions: Which of the 2 questions did you say yes to? Burning? Ripping? Quite a big difference when trying to get this issue solved and get you on your way to dvd burning. I also noted you use "VALUE - DISCS". Check those discs here: http://www.dvdinfopro.com Tell us what code they are along with how you are trying to backup white chicks. Nero and dvd shrink is all I used to backup whitechicks. Also, get some rw's to practice with so you don't waste any more discs. Don't be shy, the more info we get,the better: other burning and ripping software you didn't list,pc specs, and burner brand and model #. Later
Well after re-reading your post I see your problem is with burning. Now after it freezes do you get any error messages?
no accually i dont have any error messages. what happens is the software will just stop responding and my burner (sony dru-710a) will just keep on doing something (the light just flashes). the only way to get my burner to start responding again is to manually power down the computer and start up again. i am using windows xp sp1, i have a amd 2800 cpu (64bit series), 512 megs of ram. i just got a new 200gb hard drive and will start with a new install of windows xp. maybe that will fix it.
when trying to burn the backups of my computer, it did the same thing in nero. i saved the log: Kurt **PRODUCT SERIAL NUMBER CENSORED** Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/28/2003 5:53:46 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.19 Recorder: <SONY DVD RW DRU-710A> Version: BY02 - HA 1 TA 1 - 6.3.1.19 Adapter driver: <nvatabus> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 5 TA 0 - 6.3.1.19 Adapter driver: <d346prt> HA 5 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00EVA0 nvatabus Port 1 ID 0 DMA: Off CdRomPeripheral : ASUS DVD-ROM E608 nvatabus Port 1 ID 0 DMA: Off CdRomPeripheral : SONY DVD RW DRU-710A nvatabus Port 1 ID 1 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 5 ID 0 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 6 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-710A E: CDRom1 Generic DVD-ROM G: CDRom2 AXV CD/DVD-ROM H: CDRom3 ASUS DVD-ROM E608 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 159MB (163180kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.1.2005 ISO compilation 12:38:01 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:38:02 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 12:38:02 PM #3 Text 0 File Writer.cpp, Line 124 Writer SONY DVD RW DRU-710A running 12:38:02 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:38:02 PM #5 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 12:38:02 PM #6 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1639247 (364:16.47, 3201MB) 12:38:02 PM #7 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 12:38:02 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: SONY DVD RW DRU-710A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AF1 Disc Application Code: 64, Disc Physical Code: 193 12:38:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:38:02 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1639248 (1639248) = #1639248/364:16.48 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1639248 blocks [SONY DVD RW DRU-710A ] -------------------------------------------------------------- 12:38:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [SONY DVD RW DRU-710A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3357179904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1639248 | lead-out | 1 | 0x00 | 0x41 12:38:20 PM #12 Phase 24 File dlgbrnst.cpp, Line 1865 Caching of files started 12:38:26 PM #13 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 12:38:26 PM #14 Phase 25 File dlgbrnst.cpp, Line 1865 Caching of files completed 12:38:26 PM #15 Phase 36 File dlgbrnst.cpp, Line 1865 Burn process started at 4x (5,540 KB/s) 12:38:26 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:38:26 PM #17 Text 0 File dlgbrnst.cpp, Line 1723 Set remaining time: 10:16,748 (616748ms) -> OK 12:38:26 PM #18 Text 0 File DVDR.cpp, Line 1932 Recording mode: Sequential Recording Mode 12:38:26 PM #19 Text 0 File Mmc.cpp, Line 20464 Set BUFE: Power-Burn -> ON , Generic write control : ON 12:38:26 PM #20 Text 0 File DVDR.cpp, Line 2073 Start write address at LBA 0 DVD high compatibility mode: Yes 12:38:26 PM #21 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:38:26 PM #22 Text 0 File DVDR.cpp, Line 4817 Drive: SONY DVD RW DRU-710A Book Type request: Physical disc type Changing the book type was finished with error code: 0 12:38:59 PM #23 Text 0 File Cdrdrv.cpp, Line 1294 12:38:59.328 - SONY DVD RW DRU-710A\H1 T1 : Queue again later 12:48:07 PM #24 SCSI -1064 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02DC0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x16 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x21 0x00 12:48:07 PM #25 CDR -1064 File Writer.cpp, Line 304 Invalid block address 12:48:07 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:48:07 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 12:48:07 PM #28 Text 0 File DVDR.cpp, Line 2315 EndDAO: Last written address was 1442047 12:48:29 PM #29 Text 0 File dlgbrnst.cpp, Line 1723 Set remaining time: 0:00,000 (0ms) -> OK 12:48:29 PM #30 Text 0 File dlgbrnst.cpp, Line 1723 Set remaining time: 0:00,000 (0ms) -> OK 12:48:29 PM #31 Phase 38 File dlgbrnst.cpp, Line 1865 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.95 , size=24832 bytes, created 6/24/2004 2:42:00 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/28/2003 5:53:46 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 12/31/2004 7:26:41 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 1, size=92672 bytes, created 7/12/2004 2:40:00 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 1, size=28672 bytes, created 7/12/2004 2:40:42 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 1, size=7680 bytes, created 7/12/2004 2:44:06 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\nvatabus.sys': Ver=5.10.2600.0412 built by: WinDDK, size=63744 bytes, created 1/12/2004 9:36:00 PM (Adapter driver for rec) File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 3/12/2004 9:41:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) here is another message: I editied it to fix a link
how to i enable dma? and btw, the reason i bumbped after 4 hours was because it was almost off of the page and i didn't want it deleted