Hi all, In the past I have been able to burn to dvd with no hassle, and all of a sudden recently I can't do one. I have followed your instructions to other users on the same problem and so far I have been unable to rectify my probs, I have uninstalled, reinstalled, changed media, changed software etc. Any help would be greatly appreciated. Here is a copy of the error file. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3160827AS 3.42 SiSRaid Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 631MB (646872kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.1.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 3:50:22 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 3:50:22 PM #2 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:50:22 PM #3 Text 0 File DVDCopy.cpp, Line 319 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 1698672 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 3:50:22 PM #4 Text 0 File DVDCopy.cpp, Line 434 Max -1 tracks of 1 allowed to copy 1: 0 - 1698672 = 1698672, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3:50:22 PM #5 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 3:50:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1698671 (377:28.71, 3317MB) 3:50:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 3:50:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:50:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1698672 (1698672) = #1698672/377:28.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1698672 blocks [Image Recorder] -------------------------------------------------------------- 3:50:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3478880256, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1698672 | 1698672 | 0x00 0 | 1 | 1 | 0x41 | 1698672 | 1698672 | 0x00 1698672 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 3:50:22 PM #11 Phase 120 File dlgbrnst.cpp, Line 1746 Creating the image for burning 3:50:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:56:37 PM #13 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 1698672 (19EB70h), length 0 blocks 3:56:37 PM #14 Phase 121 File dlgbrnst.cpp, Line 1746 Creating Image completed successfully 3:56:38 PM #15 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:56:38 PM #16 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 3:56:38 PM #17 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 3:56:44 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 3:56:44 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3478880256 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Adam O'Sullivan\My Documents\TempImage.nrg> 3:56:44 PM #3 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 3:57:18 PM #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1698671 (377:28.71, 3317MB) 3:57:18 PM #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 3:57:18 PM #6 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 3:57:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.) 3:57:18 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1698672 (1698672) = #1698672/377:28.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1698672 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 3:57:18 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3478880256, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1698672 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1698672 | 0 | 0x00 1698672 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 3:57:18 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:57:18 PM #11 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 4x (5,540 KB/s) 3:57:18 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:57:18 PM #13 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 3:57:18 PM #14 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 3:57:18 PM #15 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:58:59 PM #16 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 00 0C 0C Buffer x06a80040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3:58:59 PM #17 CDR -1135 File Writer.cpp, Line 299 Write error D: HL-DT-ST DVDRAM GSA-4163B 3:58:59 PM #18 Text 0 File DVDR.cpp, Line 3434 EndDAO: Last written address was -1 3:58:59 PM #19 CDR -1135 File WriterStatus.cpp, Line 162 Write error D: HL-DT-ST DVDRAM GSA-4163B 3:58:59 PM #20 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 3:59:00 PM #21 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 4x (5,540 KB/s) 3:59:00 PM #22 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:59:05 PM #23 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 3:59:05 PM #24 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 11/3/2005 3:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) P.S PLEASE HELP ME BEFORE I GO MAD LOL
I have checked your log and this is all I can find You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Yes your firmware can use any update - you're 3 versions behind. The latest is A106. Here's a link. Give the suggestions a go and let us know.
Hi All, Thanks for your help I ran Roxizap but unfortunalely no such luck as yet here is the error log from Shrink 3.2 Thanks Again Adam PS I was going to try to update the firmware the other day but I got a bit worried when it said. These pages are only for advanced users. Bad flashing could destroy your drive definitively. Read carefully the installation notes of your firmware before you upgrade. The Firmware Page and the drive manufacturer can't be responsable on REMEMBER: This is at your own risk!!!! Seeing that I am still learning I didnt feel to confident to continue. Any advice on what to do would be GR8.
OOPS I forgot to attach the error file sorry, here it is 1st Nero after Roxiozap and 2nd Shrink 3.2 after Roxiozap as well. Not that there will be much difference seeing as Shrink uses Nero as the burning tool but if it helps what the hell. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3160827AS 3.42 SiSRaid Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 621MB (636592kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.1.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 6:26:40 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:26:41 AM #2 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:26:41 AM #3 Text 0 File DVDCopy.cpp, Line 319 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 1698672 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 6:26:41 AM #4 Text 0 File DVDCopy.cpp, Line 434 Max -1 tracks of 1 allowed to copy 1: 0 - 1698672 = 1698672, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:26:41 AM #5 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 6:26:41 AM #6 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1698671 (377:28.71, 3317MB) 6:26:41 AM #7 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 6:26:41 AM #8 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:26:41 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1698672 (1698672) = #1698672/377:28.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1698672 blocks [Image Recorder] -------------------------------------------------------------- 6:26:41 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3478880256, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1698672 | 1698672 | 0x00 0 | 1 | 1 | 0x41 | 1698672 | 1698672 | 0x00 1698672 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:26:41 AM #11 Phase 120 File dlgbrnst.cpp, Line 1746 Creating the image for burning 6:26:41 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:33:00 AM #13 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 1698672 (19EB70h), length 0 blocks 6:33:00 AM #14 Phase 121 File dlgbrnst.cpp, Line 1746 Creating Image completed successfully 6:33:01 AM #15 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:33:01 AM #16 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:33:01 AM #17 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 6:33:07 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:33:07 AM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3478880256 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Adam O'Sullivan\My Documents\TempImage.nrg> 6:33:07 AM #3 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 6:33:39 AM #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1698671 (377:28.71, 3317MB) 6:33:39 AM #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 6:33:39 AM #6 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 6:33:39 AM #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.) 6:33:39 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1698672 (1698672) = #1698672/377:28.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1698672 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 6:33:39 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3478880256, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1698672 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1698672 | 0 | 0x00 1698672 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:33:39 AM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:33:39 AM #11 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 4x (5,540 KB/s) 6:33:39 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:33:39 AM #13 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 6:33:39 AM #14 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 6:33:39 AM #15 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:33:56 AM #16 Text 0 File Cdrdrv.cpp, Line 1292 06:33:56.812 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 6:34:33 AM #17 SPTI -1093 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 3B 10 00 0C 02 Buffer x069d0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6:34:33 AM #18 CDR -1093 File Writer.cpp, Line 299 No seek complete D: HL-DT-ST DVDRAM GSA-4163B 6:34:33 AM #19 Text 0 File DVDR.cpp, Line 3434 EndDAO: Last written address was -1 6:34:36 AM #20 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 4x (5,540 KB/s) 6:34:36 AM #21 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:34:41 AM #22 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 6:34:41 AM #23 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Now Shrink 3.2 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3160827AS 3.42 SiSRaid Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 670MB (686968kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.1.2007 NeroAPI 6:43:40 AM #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 6:43:40 AM #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 6:43:40 AM #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 6:43:40 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:43:41 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:43:41 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 6:43:41 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 6:43:41 AM #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 6:44:02 AM #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1697359 (377:11.34, 3315MB) 6:44:02 AM #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 6:44:02 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 6:44:02 AM #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.) 6:44:02 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1697360 (1697360) = #1697360/377:11.35 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1697360 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 6:44:02 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3476193280, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1697360 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1697360 | 0 | 0x00 1697360 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:44:02 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:44:02 AM #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 6:44:02 AM #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 6:44:02 AM #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 6:44:02 AM #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 4x (5,540 KB/s) 6:44:02 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:44:03 AM #21 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 6:44:03 AM #22 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 6:44:03 AM #23 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:44:38 AM #24 Text 0 File Cdrdrv.cpp, Line 1292 06:44:38.843 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 6:45:23 AM #25 SPTI -1093 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 3B 10 00 0C 02 Buffer x190a0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6:45:23 AM #26 CDR -1093 File Writer.cpp, Line 299 No seek complete D: HL-DT-ST DVDRAM GSA-4163B 6:45:23 AM #27 Text 0 File DVDR.cpp, Line 3434 EndDAO: Last written address was -1 6:45:25 AM #28 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 4x (5,540 KB/s) 6:45:25 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 6:45:25 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 6:45:25 AM #31 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:45:30 AM #32 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 6:45:30 AM #33 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 3/11/2005 3:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Many Thanks Adam
Hi all, I had a few beers for courage and took the plundge and updated the drivers it wasn't that hard after all. Yeah Yeah I know I got scared lol, But unfortunatly still unable to burn. Any other suggestions. Adam PS here is a copy of the Error log again. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3160827AS 3.42 SiSRaid Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 639MB (655012kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.1.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 7:47:05 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 7:47:05 AM #2 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 7:47:05 AM #3 Text 0 File DVDCopy.cpp, Line 319 DVD Track-Information from source disc: Media Type: DVD-ROM S01 T01 Con 0x14 Start 0 Len 1698672 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 7:47:05 AM #4 Text 0 File DVDCopy.cpp, Line 434 Max -1 tracks of 1 allowed to copy 1: 0 - 1698672 = 1698672, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 7:47:05 AM #5 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 7:47:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1698671 (377:28.71, 3317MB) 7:47:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 7:47:06 AM #8 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:47:06 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1698672 (1698672) = #1698672/377:28.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1698672 blocks [Image Recorder] -------------------------------------------------------------- 7:47:06 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3478880256, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1698672 | 1698672 | 0x00 0 | 1 | 1 | 0x41 | 1698672 | 1698672 | 0x00 1698672 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 7:47:06 AM #11 Phase 120 File dlgbrnst.cpp, Line 1746 Creating the image for burning 7:47:06 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:53:20 AM #13 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 1698672 (19EB70h), length 0 blocks 7:53:20 AM #14 Phase 121 File dlgbrnst.cpp, Line 1746 Creating Image completed successfully 7:53:22 AM #15 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:53:22 AM #16 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 7:53:22 AM #17 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 7:53:27 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 7:53:27 AM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3478880256 CUES: MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Adam O'Sullivan\My Documents\TempImage.nrg> 7:53:27 AM #3 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 7:54:01 AM #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1698671 (377:28.71, 3317MB) 7:54:01 AM #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 7:54:01 AM #6 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 7:54:01 AM #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.) 7:54:01 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 1698672 (1698672) = #1698672/377:28.72 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1698672 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 7:54:01 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3478880256, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1698672 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1698672 | 0 | 0x00 1698672 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 7:54:01 AM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 7:54:01 AM #11 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 4x (5,540 KB/s) 7:54:01 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:54:01 AM #13 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 7:54:01 AM #14 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 7:54:01 AM #15 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:54:30 AM #16 Text 0 File Cdrdrv.cpp, Line 1292 07:54:30.281 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 7:55:00 AM #17 SPTI -1093 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 3B 10 00 0C 02 Buffer x06980040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7:55:00 AM #18 CDR -1093 File Writer.cpp, Line 299 No seek complete D: HL-DT-ST DVDRAM GSA-4163B 7:55:01 AM #19 Text 0 File DVDR.cpp, Line 3434 EndDAO: Last written address was -1 7:55:03 AM #20 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 4x (5,540 KB/s) 7:55:03 AM #21 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:55:08 AM #22 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 7:55:08 AM #23 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 3:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
What other media have you tried besides the TDK's? Try cleaning the lens of the drive - either by blowing some compressed air or with a dvd lens cleaner. A dirty lens can be one cause of the no seek complete error you're getting. Check you hard drive too and see if it's in DMA mode - looks it's connected by a raid controller and Nero doesn't report those correctly. Here's a guide for ide controllers but it will get you in the right direction.
Hi Binkie7, I have used many different types of Media TDK, Sony, Muller, and other Cheap ones and never had a problem, thats why I bought TDK after having trouble, because I had used them on numerous occasions before and never had a problem. I checked the DMA mode they were fine on both Primary and Secondary. I will try cleaning the lense and see how that goes. Thanks again for your help. Adam
Hopefully that will do the trick Dust/Dirt that we don't see collects on the lens and this might just be causing the problem. If not try uninstalling the drive in device manager rebooting and let windows do it's thing and reinstall. Sometimes you have to watch the media like the TDK's you are using - you never know who you will get. I haven't had a problem w/ TDK made by themselves but I've only used 10 - 8x's. I mainly use Taiyo Yuden or Verbatim. Anything else change pc since you were last able to burn?
Anyone know why the 6.3.1.4 shows up when NeroBurning ROM is used? Also, have any other files been tried? All the logs seem to use the same compilation, except the Burning ROM attempt showed 3315 for a size instead of 3317.
Hi Binkie7, Thx for the reply, Unfortunately I live in a fairly small country town where the selection of blank DVDs is shall we say slim pickings,lol & Theses TDK have always worked in the past, as the saying goes go with what u know. I will give the drive a good old clean out and see how it goes, then try your other suggestion about uninstalling the drive. Could it just be my burner has burn't its last disk? Thanks Again Adam
Hi Saltgrass, You raise a good point about why the 6.3.1.4 appears I don't know why this is considering I ran the Nero Cleaning Tool and yes I have tried other files thats just one I had sitting @ the computer. Here is a log file from a different compilation. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3160827AS 3.42 SiSRaid Port 2 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4163B D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 582MB (596432kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.1.2007 NeroAPI 6:08:29 AM #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 6:08:29 AM #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 6:08:29 AM #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 6:08:29 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:08:29 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 6:08:29 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 6:08:29 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 6:08:29 AM #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 6:09:02 AM #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2046111 (454:41.36, 3996MB) 6:09:02 AM #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 6:09:02 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 6:09:02 AM #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.) 6:09:02 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2046112 (2046112) = #2046112/454:41.37 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2046112 blocks [D: HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 6:09:02 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4190437376, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2046112 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2046112 | 0 | 0x00 2046112 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:09:02 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 6:09:02 AM #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 6:09:02 AM #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 6:09:02 AM #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 6:09:02 AM #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 4x (5,540 KB/s) 6:09:03 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:09:03 AM #21 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 6:09:03 AM #22 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 6:09:03 AM #23 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:09:20 AM #24 Text 0 File Cdrdrv.cpp, Line 1292 06:09:20.546 - D: HL-DT-ST DVDRAM GSA-4163B : Queue again later 6:10:07 AM #25 SPTI -1093 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 10 3B 10 00 0C 02 Buffer x190a0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6:10:07 AM #26 CDR -1093 File Writer.cpp, Line 299 No seek complete D: HL-DT-ST DVDRAM GSA-4163B 6:10:07 AM #27 Text 0 File DVDR.cpp, Line 3434 EndDAO: Last written address was -1 6:10:09 AM #28 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 4x (5,540 KB/s) 6:10:09 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 6:10:09 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 6:10:10 AM #31 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:10:14 AM #32 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 6:10:14 AM #33 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 3/11/2005 3:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Many Thanks for your Suggestions Adam
Hi all, Could this possibly be the problem, Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.) If it is I don't know why all of a sudden it has a problem with DVD-R when thats all I have ever used. Thanks Adam
Clean off the lens of the burner and see how that goes. Still getting the no seek complete error - another possible cause is the power. So might want to try making sure the power connection (all actually) is secure. Try another power connector too. Drive mightbe going but best to rule out all possibilities.
