PSU HELP

I'm afraid not.
Resend perhaps?

 

OOPs, Yeah you did respond, I'll send you the specs on my computer when I get home and if you have time, just give me some basic steps on where to start. I read through the thread, still a little unsure excatly where to start.

Thanks

 

Ok sure

 

is there anything else i could do apart from trying another fan there seems to be nothing wrong with the fan as i got one and took it back as i thought there was a fault with the 1st one when it said no signal

 

Why only the fan? I thought we established the problem was with the power supply?

 

yes sorry i meant the power supply i have taken all the cables out and re connected them and i have no idea what else to do please help

 

@pizat
I really think you should try a diffrent power supply, borrow one from your friend or get the one you have tested.
You really have to find out if that power supply is good ot bad.
Good luck

 

Indeed, and it probably is the power supply as well, even if it's new.

 

i have just tried a different power supply and it is still doing the same

 

@pizat

Are you using the onboard video or do you have a seperate video card?

 

i have not changed it since i got it i think its the standad one to be honest http://www.asrock.com/mb/overview.asp?Model=K7S41&s=n

 

pizat, if your using a seperate video card, make sure you haven't got your vga cable pluged into the motherboard video output.

 

no its just the one what came with it any other ideas ? i really need the computer going again

 

how do i do that ?

 

here is a link to the manual, look at page 13 and 14, it shows the location where the cmos jumpers are and how to reset it.

good luck

ftp://download.asrock.com/manual/K7S41GX.pdf

 

i think it is my graphics card could someone please help me find the model number of the graphics card i have got so i can get a direct replacement this is my motherboard http://www.asrock.com/mb/overview.asp?Model=K7S41&s=n

thanks

 

Do you have a separate graphics card or are you using onboard video?

 

just the normal one so it will be onboard