Make sure you are not using a splitter. Where are you starting your scan from, try starting from 200 to 900.
Hi Guys Having problems upgrading my box. It's now on 9.10 but can't seem to upgrade to the new file. everytime I try keeps coming up " Wrong Rom" Help please.Thanks
Hi, I've just flashed with the 281208 file. I'm in Chorus. Seemed to go through the upgrade no problem. Scanned all the channels and picked up 84 of them. Ok so far. However, the channels are jumping/skipping. I'm not at all familiar with this type of box. Just doing it for a friend. Can anyone help me or step me thro what is wrong if they know?
Hi, I've just flashed with the 281208 file. I'm in Chorus. Seemed to go through the upgrade no problem. Scanned all the channels and picked up 84 of them. Ok so far. However, the channels are jumping/skipping. I'm not at all familiar with this type of box. Just doing it for a friend. Can anyone help me or step me thro what is wrong if they know? Just to add...the signal is ok as its working fine with my eurovox...????????????
If I leave the box switched on for a few mins the channel seems to come through.... is this a characteristic of this type of cable box?
I'm not exactly sure what you mean by the channels are jumping/skipping? It could be the box was updating the keys for you. Is it ok now? If not you might need to flash it again. Make sure you download it from eamo's library.
Since about Dec 23rd I've had a problem with reduced number of channels following a scan and picture jumping showing bad signal. Will try the 281208 file tongith and see if it makes any difference but I fear not as others have installed it and it hasnt fixed the same problem :-(
My picture is perfect since i installed the new firmware, and as far as i know so are most peoples. It's usually only the people with problems that you get to hear about on here.
Hi Evastar Still having promblems.. Tried again downloaded from Eammo but still getting " wrong ROM image" not sure what i'm doing wrong it's so long since I've this. Please Help it's driving me crazy.
Evastar, I left it on for a few mins and the channels started to come through. It was only on RTE1/2,TV3,TG4 that the channels were jumping. So I got the frequencies for these channels from my eurovox and manually scanned them in and they are perfect now. Thanks
Hi All Does this fix work in the uk and do you load it with STB 5.20 or the stb 6? Did my last flash with the 5.20 and had no probs? Also bit of a dumb question but is it the 28122008 file i need or the 091208 UK Fix? Any help much appreciated.
Yes it works in the uk, and you need stblink 5.32 you will find it in eamo's in the replay software file. You want the 28122008 file, not the 9.10.
Thanks Evastar, got what i needed when i get the time i will give it a go. Thanks again for all your help.
Replay Box PVR Loaded 910, then tried the new image, however it still displays 600d at the finish and then after a reboot there is no display. Reconnected again and flashed with 742 and went straight to 913, started up ok and displayed the clock on standby, and 0. when switched on. Tried the new image again and the same thing happens again, no display weather switched on or on standby. The new image has gone on a replay lite with no probs, so I know the image is ok and not corrupt.