Replay Lite

Ok was doing the scan from 400-600, but changed it now and doign 200 - 404 , fingers crossed

 

Finished the scan and all still scrambled, went to parental loca and entered 0000 and then red button but i'm not getting to the key screen anymore, have software version 752.

Is there something i'm missing now?

 

When all the channels are found....Select VIEW.

If you get 0000:scrambled
Go to menu,
User Installation
Parental lock
Current password 0000
Parental lock –off
Install lock ----off
New password 7777
Confirm password 7777
Exit to TV Screen,
You need to go to parental lock again
Current password
Type 7777
Goto key manager.
Current key----ok
Auto update -----off

Credit to Brian1956 for the above....

 

Marco, If you upgraded to Ver 7.52 did you change the default password as per Brian1956's original note.. If so, that's your problem...Cheers m8

 

nope no upgrade was done , bought the box with this version, worked great for months,
When i try the above, it gets me to the keymanager scrreen but i cant access the section to disable the auto updates.

 

Thanks for the replys regarding the MMDS in Ashbourne. Does anyone know if the Starview 2 The Box works on NTHell MMDS too? As I've not got the Kryptview to work I need to find another box that will and the replay lite is mine.

 

Ok looking a little beter getting "1800 Scrambled " but looks like it may have worked jsut need to wait for a while to see if the stations get descrambled( It that even a word?)

 

Does it usually take long to get all the channels? i've about 10 at the moment

 

well all of them worked for about 2 hours and now gone again, maybe a problem with ntl

 

Hey guys new to all this replay lite stuff, anyway i bought a box and (I'm in ch*rus land Cork) scanned using the symbol rate 6875 from 200 to 450mhz, i got most of the channels setanta sky etc, but about half of the channels don't work and come up scrambled saying no signal or 1800 scrambled. I tried to get the emu menu but nothing happens, could anyone help??

 

hi brian ive not got a problem for u this time.i just never got a chance to thank you for ur advice on the plug i got one in maplins and it did the job thanks again and keep up the good work its appreciated........



ps..did u find out anything about the epg........

 

Scrambled 1800 is OK!
Switch to a working channel & allow time for others to update codes.

What version of software have you installed?

 

Not too sure what version it is, was bought just a week a go off datageeks.co.uk so i presume it's the latest, how do I find out, also channels still coming up with no signal

 

Check your software by going to

MENU
UTILITY
RECEIVER INFORMATION

 

ok got it its 7.56, is that ok?

 

Well, v7.52 is the latest for NThell & it updates fine.

I've tried 7.56 here recently but could not get all the channels.

 

ok how do i go about getting v7.52? is there any otherway? heard about an EMU but couldn't get it up?

 

7.52 & the software needed to communicate with the box can be got from Emo's link at the bottom of many posts on this Forum.

You will also require a Null Modem cable to connet you box to a PC.

All the Info you need is here in previos posts, everything.

 

yeah had a browse through brian1956's stuff, think it may be a little bit complex for myself... don't suppose there's a tec shop that'll update if i bring the box in? cos was looking at null modem cables and they seem a bit expensive

 

Behaner...you can buy Null Modem Cables for little more than €5 in Dublin. Maplins charge €13.99 but that's daylight robbery. The instructions from Brian1956 are really really easy to follow..do exactly as written in them and you will get your box to the correct level...