Replay Lite

thanks brian , have replay pvr and that scans every freq one by one was thinking have friend in navan and have tried every ch//us freq on e/v box and he can only get 36 channels and 5 tps so if we scan with r.p.l box might just pick up the rest no harm trying thanks again

 

Cheer's Witko

 

Anyone got problems with Replay box i am only getting RTE2 all else scrambled i am in D24 i have done a full search but to no avail

 

there has bee 5 code changes now in the last 2 hours on both N** and the C***** network that is all you can find the codes at the bottom of my post

 

Thank you my friend that was great am up and running again

 

No problem glad you are sorted

 

i seem to have lost setanta sports 2 i have rescanned but its still missing instead i have senanta sports 2 but in actual fact its mtv 1+ any ideas lad and ladies?? or even brian he he ! ps i,m in dublin 12

 

Hi Kizzy101, He He,

There hasn't been a frequency chabge on Setanta 2, it still on Freq 394.

Doing a full scan should have found it, so it might be a cable problem.
You can do a full scan again at these settings.

Start Freq 200
End Freq 403
Symbol Rate 6887
Constellation 64 Qam
Search By Network on
When all channels are found select View.
This should take no longer than 5 Mins.

Or you could dp a manual search on Freq 394

To do a manual search on the replay lite box.
Menu,
User Installation,
Manual Search….OK
Up pops the Manual Search box.

Channel number: CH 1.
Frequency: 394 (what ever freq you want)
Symbol Rate: 6887 (what ever your area symbol rate)
Constellation: 64 QAM.
Search By Network: ON.
Search
The box will find a number of channels on your selected frequency.
When the search is finished, Select VIEW.
The new channels will be now stored at the bottom of your channel list.
Eg: If you already had 120 channels stored, the new ones will be stored from 121 onwards.

The manual search will find some channels you already have, just delete them.

Take care Kizzy and never your Roots (he he)

 

sorry to but in Brian they have changed around a few channels they are quite correct they need to rescan to get them back in order or manually put them where they should be

 

Thanks Feregs m8, Your input and knowledge is always welcome.

Hope You are well my friend.

Cheers,


Brian.

 

Hey guys I'm havin a bit of a problem with my replay lite, it came installed with v7.56 and I tried to update it by cloning of a box with v7.52 using a db9 cable. It flashed for about 3 min and then and stopped. I cant use the remote to turn it on anyone got any ideas on what to do??

 

Hi Behaner,

Your problem was you used the wrong cable to clone the box.
Now you probably have a box with just the red light on.

Use the link below, it will take you to a previous page that has the solution to your problem.
The post you are looking for is my reply to Keoghjohn.
It has two red flashing lights in it.
http://forums.afterdawn.com/thread_view.cfm/79/502990

It's about the 17th post down the page.

Make sure you buy the right cable for your file transfer.

It has to be a null modem lead part number L71BT

It can be bought in Maplins or any computer store. Make sure the it's a null modem lead with the correct part number.

Follow the instructions in that post and you can fix your box.

Good Luck M8,

Brian

 

Thanks Brian I'll give it a go tomorrow, the cable was an old db9 so that's probably the problem. Would you know of any places in Cork that would have a usb to female L71BT db9 cable?

 

Maplins in Blackpool retail park should have them.

 

oh yeah, will i have to install any additional drivers for the cable to work on my laptop (XP Professional)?

 

No you will not.

 

Hi again... Anyone having problems with signal on their Replay Lite in Dublin? Seems all wknd that the signal was jumpy.. i.e. picture and sound ok for about 5 secs then a slight freeze in picture and sound. Happened a few weeks ago too but it rectified itself? Also getn a few channels giving the old 1800:Scambled from time to time too.... Any ideas?

 

If you are using a laptop with no com port on it you are going to need an adapter as well and you will need to install the driver for this here is the item you might need ok install the driver first before you plug the adapter in first

USB Adapter Cable
http://www.maplin.co.uk/module.aspx?ModuleNo=29968&DOY=17m6&tabs=n

Heres the NULL MODEM CABLE Code L71BT
http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

 

If he's already used a DB9 cable then he has a serial port.

 

Yes he might have used the db9 cable but only box to box not using his laptop therefore he will have to us an adapter if his laptop does not have a comport on the back of it which if he is using xp i would very much doubt it