Replay Lite

thanks again novice, i am a muppet

 

No problem, the new software even unscrambles the muppets. Just kidding, we were all the same when we started out, as some of the really early posts in this thread show. (",)

 

can anyone help,i have updated a few boxes on my mates computer including saving the channels and then putting them back in and everything worked out great,but on my own laptop when i try to save the channels a message appears telling me to turn the receiver on even tho the receiver is on.can still do the updates but cant save the channels,any ideas?

 

Me again, ok redid that pressed view this time ..it said saving data or something for about 5 seconds, then black screen, then it said scrambled na.....then uk living came on !!! ? dont want to touch now im so close...what next ...........................anyone?

 

Thats it, you are there. You should have all the channels now. If any of them are scrambled just leave them for a few minutes to clear. Dont get confused by channels that are off air thinking they are scrambled.

 

Well done & I bet you feel real good? ;-)

 

Just ignore the message and click ok. For some reason it does this with a lot of computers. You should still be able to save the channel settings. If not just install the software and use one of the channel dumps from the replay section of eamo's library which will have them all sorted
http://www.4shared.com/dir/3042613/f6e3421c/sharing.html<br/>

 

only meeee! yippeeee! i am now in full viewing mode and with vodka n coke watching re runs of all the football i have missed ! ill have one or two for you novice ...maybe more than that ya deserve it pal. i hope this fix will last a bit know.once again a big thanks m8.

 

can any body pllllzzz help me. i put in some codes in to my replay lite about 2 weeks ago and it was workig fine but now it has gone down again. firmware is 7.52 and my prov id is 00x5b thanks a lot guys

 

You need to upgrade your firmware to v910 & that will sort it.

Links in Sig.

 

Cam anyone help me.

I can get as far as select upgrade software and nothing happens from there.

I can't find the 742a file i've tried downloading the second file but that opens an adobe file

 

can anyone tell me where i can get the firmware for a replay pvr

 

hi brian and gman, i have got the new software uploaded onto my box thanks all good now but wanted to ask one more question..i have a pvr box also, but with the pvr removed..tried my luck with new replay software hoping it might work or be compatable ..afraid it didnt and had to upload old pvr software to get it running again.. do either of you know if there is any new software available for the pvr as good as the software thats about for its cousin the replay?. any info would be welcomed. thanks again

 

wats da stri i hav da software on me computer but dnt hav da cable
does any1 no wer i can get a
USB TO 9PIN MALE ADAPTOR

 

New software for the Replay Box PVR.

Back up your channels first.
To backup your saved channels and favourites.

Connect the null modem lead to your PC and box and power up the box.
Open up the stb link.
Setup Comm.
Click Read User Data
The file will be called Factory_Data.txt
There will be 64 blocks to download from the box.
Save it to your desktop and re-name it what you want.
_____________________________________________

Then flash with the 742A
Plug back in your box wait for green light.
Then flash with the 913.
Box will probably stay on red.
Reload your channels and favs and it will fix this.
________________________________

You can reload the file you have saved on your desktop.
Open up the stb link
Click Write Factory Data and get the saved file from your desktop.
There will be 64 blocks to upload.
When it's transferred to your box.
Unplug everything...power up the box...wait for green light....then plug in your TV and scart leads.

You will have to wait while
for it to unscramble.

742a
http://www.speedyshare.com/625287176.html

913 Software Auto rolls.

http://www.speedyshare.com/721791129.html[/quote]

 

Hello wise ones. Having a problem throwing the software onto one of the boxes. Have done a few others with no problems but I can't seem to get the coms to set up on one. The others are working fine. I put the replay on standby reconnected the cables and opened up the stb link but still no connection. I'm just guessing here but will i have to try and flash with something else. If anyone can help that would be great

 

If you are using the same pc and cable that worked on the others, have you tried comm port 1 or 2. If it is not this it would indicate that the problem is with the box. If so try the following, go to Current key on the box and turn off the auto update which is most likely keeping the box busy and that may be why you cannot connect.

 

Sorry about the last post but that box is working fine. Strange that it wasn't connecting at all and also when I connected it to the tv I didn't have to search for channels they all popped up straight away.
Maybe the replay fairies sorted it out while i was having a smoke? Congrats on throwing the software up again and those links were a godsend coz I'm in the middle of nowhere on dialup

 

What area are you in? If Dublin you can get one in Maplin Jervis street or Maplin in Blanchardstown Centre. Maplin Part# ZP43W

 

YE IM IN DUBLIN SOUND TANKS