Replay Lite

Meant to say you will also need a Null Modem Cable part number L71BT. You only need the usb to 9pin male if you dont have a 9 pin male comm port on your pc.

Call them first to make sure they have them in as they were sold out at the weekend.

 

Just checked the box and it's running 752 so the software didn't load. Turned off the autoupdate but still no joy.

 

are you using a usb adapter or a comm port on the pc?

 

I'm using the comm port. I'm pretty sure it's the box because I threw the software on one after this box with no problems

 

Has me stumped. Have you checked the pins on both the comm port and the box to make sure none of them are bent.

One final suggestion that worked for someone the other day. Ignore the connection error once you know you are using the correct port number (1 or 2) and select the bin file and load it.

If this dont work give Brian or Gman a shout as they may be familiar with this problem.

 

This is probably a silly comment as you seem to know what u are doing, but have you tried to flash it with 7.42A and the the 9.10?

 

Thanks for the advice Novice99.It's a strange one has me stumped but hopefully i can figure it out.Might try to restore factory settings and see what happens,cheers

 

Yeah have done it the right way around but I think I'll throw my hat at it for now

 

Spot on Riemann,
Nice one.

Buzzymcg,

Sounds like you have a dead box.
Have you just got a Red Light.

Flash the box with 742A,
Don't do the setup com,
Untick the Mintain user software,
Upgrade Software,
You will see a warning, saying you "lost all saved data....Ignore and continue and finish the flash with the 742A.
When the flash is complete,
uplug all the leads...power up again and flash it with 910 as normal.

 

!!

 

hi brian i am ok thanks, hope you are too, i used the link you gave me but with no luck..prior to that i used the 742a file for pvr and the 751 pvr bin which gets box up and running. so i tried 742 then 913 no luck, tried 742,751,913..no luck, can you advise me on if there is a correct way or order to input new software in pvrs? h replays 742a then 910 is simple, so what would you suggest to get it working with new software? hope you can help thanks

 

Cheers brian, yeah tried that already but no joy. Going for a beer now and will try again tomorrow. Must say this forum is brilliant thanks again for all the advice

 

Try this file first,
It's the 743A
http://www.speedyshare.com/523963911.html
Don't do the setup com...Untick the Maintain user data box
Upgrade Software.....If the box is not connecting immediatly..unplug it and plug it back in real quick..real quick.
Ignore all errors that pops up.

The trick is to get an "A" file on the box with a green light.

When you do this...then flash as above with the 910.

 

can anyone help me plz i have a replay box prv-c100 and all my channels went off about 2 weeks ago and to no avail i cant get them back any help would be really apprciated thanx

 

Brian posted the new firmware a couple of posts back.

 

Hi All,

Please don't PM me as I will not respond to them, any questions can be posted here on the open forum.

My reason is I got too many PM's asking me questions that would get a quicker response on here by me or one of our many helpful members.

Thanks.

 

this might seem like a silly question but is the pvr-c100 a replay lite box? i got told it was a normal replay box or does the same software cover both?

 

Replay Lite needs 910 firmware. If it doesn't have an onboard hard drive then it's a Replay Lite.

 

ok its definetely got a hard drive so does that mean the 743a flash file covers it? sorry to be a pain but i really am as dumb as they come lol