Replay Lite

Yes there were a couple of games on the earlier versions of the Firmware but not on the latest beta.

How to change port number on PC.

Do the following.

START
Right Click "MY COMPUTER"
Choose "MANAGE"
In the resulting window, click on "DEVICE MANAGER"
In the right hand pane, click on the little plus sign beside "PORTS" in the right hand pane.
Right click on the USB Adapter (Should be something like "Prolific USB-to-Serial Comm. Port (COM#)
Choose "Properties"
Click on "PORT SETTINGS" TAB
Click on "ADVANCED"
Then you will see the COM Port Number Box. You should be able to change it there using the drop down box.
Try to set it to COM2
Restart Windows (Only if necessary)

Set STBLink to COM2 & try to connect.

If that fails try another port number.

 

Just wondering if anyones box seems to be freezing, just for a second, it never seemed to do it with the old software??

Loving the new software tho such a pleasure not having to put in the codes everyday!!

just a couple of little things about the new software which i missed from the old one, the fav button does not skip to the next fav just to the menu and the previous channel button only works when your on the same favorite section.

But who cares when it auto updates i think just being picky now

Thanks to all that made this program available and for the simple instructions to get it working

Callum

 

anyone have the lastest codes for replay lite box in dublin (been away for week and is gone )

 

61.F6.0B.92.5D.63.AC.F2
5C.E9.3B.1A.4F.01.10.FF

 

are there different codes for the star view 2 box........ can anyone tell me .if so can someone please give them to me

 

Hi all,

Just thought I would join in and share a solution to the usb-serial-null modem problem that some users may be having. I could not get the usb-serial adapter cable to work with the null modem cable, following the method outlined here.

So I went onto eB*y and got a serial rs232 pcmcia card for my laptop. Took 10 days to get here from Hong Kong but at £3.99 I wasn't complaining (the post & packing was £7.50). That worked out at €14.20.

I hooked in the card to the pcmcia slot and installed the drivers on the accompanying 4cm cd, a bit strange as it took 3 drivers for the one card??

Once installed I connected the null modem cable (from Maplin) and did the setup on page 132. As easy as that, took about 10 minutes and now I have 9.10 on my Replay Lite.

Since I did not have any serial port on my pc or laptop and I had to go to a mate's house to update the firmware (his was an older pc with a serial port) on the replay lite, I'm now happy out with my purchase.

Many thanks to Brian1956 and Gman and many others for all the posts, you guys are amazing.

Share the knowledge, keep the faith.

capcom17

 

Thanks for the update, all input is helpful.

Gr8 you got sorted..

 

This file does not work in my area!

any one with a file dump that worx in bray / grestones??

 

whats your provider

 

no codes are all the same for all boxes these are the up to date codes for n t smell

61.F6.0B.92.5D.63.AC.F2
5C.E9.3B.1A.4F.01.10.FF

 

Hi again guys/gals,

Firstly, Thanks so much to all that pm,d me with help and advice. I am now updating my box as i type and all is well in the world once more.

OK, so if like me, you have a p.c. with only USB slots in the back, then u DO need the rs 232 usb to serial adapter that i had already puchased cost approx £10(see my prev memo), but you also need the Null modem cable (which i never had), simply install the disk for the usb/serial cable, connect it to p.c. and then add the Null modem cable. And Voila you may update the box following the instructions previously mentioned.

Thanks again all for all your help and advice

You are all kings amongst men

 

LOL help help help

Have i knackered my box, I updated the 742a software but didnt do the osd910 beta, i had disconnected my box after the 742a then realised i needed to do the 910 beta, but now when i connect my box to the p.c. to the 910beta, stb link just stays on connecting and i cant connect to my box anymore to do the 910 beta???

p.s. SHOULD MENTION THAT HAVING A COUPLE OF BEERS BEFORE DOING THIS IS NOT A GOOD IDEA


HELP HELP HELP

 

*when i connect my box to the p.c. to do the 910 update STB link will not connect and just states and stays there?

 

Drinking in the day......hmmmmm, I'm jealous

First things first, you have to unplug and then replug the box after installing 7.42a. Close and reopen the stblink and now load the 9.10 in the same way as the 7.42a

 

Having a beer as its my day off and have few of them lol. Ok, this seems to be what ive done so far, 742a installed falshing light after about leaving for 5 mins after update and then disconnected and unplugged my box. Am trying several times now starting from scratch doing exactly same as i did for 1st update but will not connect?? Really confused lol.

 

Panic Not

Again unplug the box from the mains. Close the stblink and then open it again. Now power up the box to STANDBY and update firmware with 9.10 without trying to "connect".

 

THANKS SO MUCH,
Done the above without trying to connect but just clicking upgrade, update is installed am now searching for channels

 

Any probs shout back

 

Trying to flash my Replay Lite. Have USB converter for my PC and null modem from maplins. PROBLEM: Downloaded the stblinks5.20 but comes up reading the first 3 boxes ie software version, hardware & user data version all show unavailble....(Is this correct???)
Then when I untick maintain user data then click upgrade software. Just above that is communication status shows 'Connection unestablished'... then it won't allow me to download any of the other programs..... HELP HELP This is driving me mad...
Thanks. Am in Dublin

 

Help again please

OK, I have flashed my box but did not save my channels etc. Have turned on box, selected english as language set password to 7777 and turned parental lock off and also install lock, when i goto key manager it will not allow me into current key to swith auto update on (just flickers when i select current key). Do i need to access nagra and enter codes?? I have done a search for channels on auto without doing anything but the flash and change to password etc but my box did not find any channels? please if i may ask for help once more