Replay Lite

Thanks Anto1969/Gmans for the frequency for dublin you guysare all on point

 

thanks I fixed my box.

 

still sticking pleeze anyone got a solution

 

you might need a booster for it

 

it was ok when i first flashed it now getting interference through all tvs not just the one with the replay

 

if you are having prob on all the tv could be a cable fault that needs to be fixed from the cable company

 

just seems to b certain channels dont wanna have to do a full scan but if i do then so be it.

 

seems ok now wonder if that was n*lll trying to zap ma box anyway thanx for all the help

 

Not sure if i'm in the right place i tried to flash replay followed instructions waited for rapid red light now i have nothing at all i've been trying to reflash it again and i can't get comm connection and if i try to upgrade software a box keeps poping up saying lost saving data have i completely ruined it now or can i still fix it Thanks for the help

 

Your Box will be OK.

Try reflashing it again.
Untick the "maintain user data" box.
Ignore the message "you have lost saved data"
Select "Upgrade Software"
Get the updated file from wherever you have it.
The file will then start to transfer to your box.
There will be 515 blocks to be transfered to your box.
When your computer reads "Transfer Complete"
WAIT another couple of minutes for the light to be flashing to be flashing much more quickly than it was when the blocks were transfering.

When the blocks are being transferred from your PC to the box, the led on the box will be flashing at this speed

Don't unplug the box until until you see it flashing at this speed

 

Hey Edmund, I have the same problem! (Replay PVR-C100) Did you manage to get this sorted?
Thanks
Moon

 

Can somone please help i got a cable to upgrade my replay lite box one end has the right RS-232 connection but the other end has a USB connection..Can I still use this upgrade??..any help welcome...

 

No, what you have is the USB to Serial adapter.

You also need a 9 pin female serial to 9 pin female serial NULL Modem cable.

 

Gman great job on the frequencie list well done.

 

Now now Anto, don't be so modest, it was a joint effort between the two of us ;-)

Well done to you too...

 

Thanks (took me a while to get it converted) but got there nin the end

 

Yippeeee back up and running again Brian cheers mate your an absolute genious you guys out there are great thanks very much for the help i'll keep monitoring this site i think its brill thanks again.

 

[/quote]

 

Glad you are up and runing again.
I agree with you,this is a brill site.
There are lots and lots of helpful and knowledgeable people on here.
I have been around a few forums and this is the best.

Cheer's

 

Hi Brian,
I have a Replay PVR - Are you saying that the 742A Firmware in compatible with Replay Lite & Replay PVR C100? Should I upload the 7.44 first then the new 913 or 742A then 913?
Sorry for the confusion but I flashed with Replay Lite software before and it took me ages to sort it out.
Thanks for all of your information by the way! I would be totally screwed without it
MoonWB

Hi MoonWB,

The 742A file is compatable with both Replays.
I have used it on both boxe's and it always works.
it is especially good when you have to get a dead box working.
There is another "A" file 743A but I find the 742A better for kickstarting boxes.

In your case, back up your channels first.
Flash with 742A the 913.

If you are having problems with the flash.
Don't do the "set up Comm"
Untick the "Maintain User Data" box.
Ignore the error message that you get.
Select "Upgrade Software"
Get the 742A file and it will start to transfer to your box.
This is called forcing the flash and works for the Replay Lite too.
Then do the same with the 913.
When that flash is complete, load up your channels and favourites from your PC.

The channel file works for both boxes The Lite and PVR.

Cheer's M8ty