Replay Lite

thats lookinng good now ! thanks a million !

 

If I remember correctly you were using a reply lite on a cable setup & at this stage I feel there was some other issue affecting reception, some areas of the country are cabled but they are fed from a communal mast/antenna somewhere in the locality which may or may not have gone digital as yet so you might have been flogging a dead horse to begin with...who knows !!! I setup a dvb-c box in a rural area (small housing estate) all the houses there were cabled but fed from a local mast, the owner could only get a signal when youpissy came out to one of a number of under ground junction boxes in the estate & connected him up there even then neither the ev max, reply or kryptview worked very well & only a small amount of channels came through even though the boxes found over 100 with scanning, the only box that worked 100% was THE BOX (dvb - c) can you check with a neighbor at the new place who has MMDS & see if they have signal issues ?

 

Hi again Lenny123,

I never actually got the Replay Lite to work, which was why I initially joined this forum.
I thought I was on cable until I enquired with youpissy [like the alias by the way ]
They informed me that Sligo is supplied through MMDS, which prompts me to get a different box as replay lite isn't compatible with MMDS.
I understand that the only options for Ch**us MMDS are The Box T or Eurovox TX.
Trying to figure out which to go for... i think I'll subscribe to the basic analogue MMDS package (€23.50 a month) and buy a box to get the rest of the channels!

 

Starview BoxT is the best to use easy to flash and set up the Euro Tx is slightly harder to flash and setup but it is really your own choice

 

for the extra €3 I'd go for the digital option,..that way if your own digibox ever goes down you'll have their box to fall back on.

 

I never had any problems flashing the TX ! did the BOX T auto update during the key changes ? the TX did & did'nt need any new firmware either.

 

[/quote=lenny123] for the extra €3 I'd go for the digital option,..that way if your own digibox ever goes down you'll have their box to fall back on.[/quote]

Ya, i thought the same myself, but then if I want multiroom (probably another 2 rooms) I can't split the cable with digital, can i?
I think this can only be done with analogue.

 

Do an Auto search,

Start Freq.......290

End Freq.........418

Symbol Rate.......6887

Constellation.....64QAM

search By Network....ON

Search.............when all channels are found...Select View.

Should take less than 15 Mins.

 

Ya, i thought the same myself, but then if I want multiroom (probably another 2 rooms) I can't split the cable with digital, can i?
I think this can only be done with analogue.[/quote]

I have digital and have my N*L box in one room and my Replay Lite in the other room, with the cable split. Have no prob getting 130 or so channels, but I'm in Dublin and the reception here is quite good. If yours is already bad, splitting it might make it worse and you might lose some channels.

 

Here, Im still havin problems with my box.

Most of my channels just show up the blank blueish backround.
Any ideas?

eNTyL Dub

 

your npt the only one with that prob i know there has been freq changes so id imagine reloadthe chanel dump on to it there is a new one check theliberary im in dublin and i don have anuthing wrong with mine and i got mine done since i first came avail to do so

 

your in blanch ain ya

 

i am ye

 

sent ya a pm

 

quick question lads,put that 910 on and all is well but i cant seem to be able to put a lock on the adult ones,help me out before the kids minds are warped!!!!!!!!!!!!

 

press the channel manager then tv channel that brings you into the list of stations then look at bottom thegreen button edits the channel also gives you the lock option so enter your pinn to lock it and away you go

 

i have tried this,but when i hit green for edit....a box pops up with 8 options and at the bottom of the list is 'lock by ch' and when i press ok on it nothing happens......the padlock icon appears on the channel list but it doesnt actually lock anything

 

yeah but should the top one be delete by channel?????

 

HI, when you go into the edit channel menu and press ok on lock channel it should ask for your password. Enter your password and then go to the channel you want to lock and press ok. A small padlock should come up beside it on the list. Then exit and you should get please wait for saving data and then it should be locked. To unlock it repeat the process again.

 

It won't lock anything unless you have a password switched to on.