Replay Lite

Are these new boxes that have never been used before IN THE UK AND IRELAND? must check that you have the correct voltage supply on the plugs.... for example some products bought in the US MAY need a transformer in order for them to work. just a thought....

 

They are the correct voltage, went through all the tests( they were working for about 5 months ), very strange that two would go in two different places at the same time, wierd, will just have to replace the power leads, know anywere that these can be bought on-line

 

you dont need to go anywhere to get one online like i busted my one so i ud=se the power lead from my radio to make it happin as long as its the same voltage your sweet oh and the same connection on the end lol

 

Im all out of leads, im sure ill get them somwhere, i am ok mine is working but if it went i would be straight out looking for one i know they say there is a 100 channels with nothing on but then why are you lost without TV

 

true true but if yours went you would run to hell nd back to get one lol

 

Be extremely careful about crossing power supplies. You can cause a lot of damage to your box you may be unaware of in the first instance.
Go on line to CPC, or RS to find out the correct supply you need. Email customer support if you are really unsure what you need at these sites and tell them the details from the existing supply first. I would only buy one in the first instance perhaps, because the power supply in the box may be shagged already and you would have two useless brand new power supplies..... good luck anyways. prawner.

 

Replacement Power Cable For the Replay Lite.


I got a Uniross Regulated AC/DC Adaptor.
Input :AC 100-240V~50Hz 0.17-0.38A
Output C 3,4,5,6,7,8,9,12V---1250mA 15VA Max.
Part Number AD100942.

I got in the Electrical shop in Swords Village.
When you enter Swords village, it's on the right side,in off the road. Make sure when you connect it to the box, it's set at 12V
and that the attachment for the box connector is set at the correct polarity.
Bring along your dud cable to any good electrical shop and they will provide you with a proper replacement

 

Now that's more helpful than my post, but then Brian does have this knack of being unbelievably helpful!!

 

Yeah, i have to agree with you there.

Brian, gman, moggser and novice have all been a great help to me on this thread over the last few months.

And others, but mainly them. So thanks guys!

 

Hi can anybody tell me haw to get the new n*l uk codes keycodes
Thanks

 

You can't get codes on AD anymore.

 

is chours and ntl different,like i mean my mate lives in diff part of city,he had ntl befroe the 2 joind up,i had chorus,so would his replaylite need a diff set up than mine??i got my box updated,but there seems to be no signal going into the box???but when i connect the cable straight to tv its fine,so its defo the box,or settings???

*removed*

 

did read them,but somtimes ya forget!!!

 

Same company but use different frequencies and symbol rates as they both run off different systems. For scanning on a replay lite on a chorus line change the symbol rate to 6875, the channels should show during the scan. Hope this works for ya

 

and if you're NTL use the 6887 symbol rate to scan

 

There's a new channel dump for N*L Dublin, look at Novice99's posts on this page: http://forums.afterdawn.com/thread_view.cfm/209/502990

 

hi kc here i have a small prob maybe someone may be able to help with i got a replay box not the lite one and have tried every firmware poss but all i end up with is a red lite on till i switch the box off any ideas

 

You need 913 firmware for that box.

The red light scenario is nearly always caused by unplugging the Null Modem cable too soon (Before the flash has fully completed).

When the blocks are transferring the red/green light will flash slowly. Even after all the files are transferred by your PC WAIT until the red/green lights flash much more quickly than it did when you could visibly see the files transferring on your PC.
Only then unplug everything and exit the stb link.

Go to the firmware folder and download:
742a
744
913

When you have all these files downloaded, you are ready to go.
____________________________________________________________________


Connect the null modem lead to the box and your PC.
Click on the stblink5.20.zip file and choose run.
Do not do choose the setup comm.
And ignore any errors you see.
Remember UNTICK maintain user data.
Select upgrade software
Get the 742a file from your PC.
From when you see the blocks start to transfer.
It takes 4 mins for the box to be updated.
But make sure you see the led flashing much more quickly than it did when the blocks were transferring. If you leave for even 5 mins it will be OK.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
____________________________________________________________________

Connect the null modem lead to the box and your PC.
Click on the stblink5.20.zip file and choose run.
Do not do choose the setup comm.
And ignore any errors you see.
Remember UNTICK maintain user data.
Select upgrade software
Get the 744 file from your PC.
From when you see the blocks start to transfer.
It takes 4 mins for the box to be updated.
But make sure you see the led flashing much more quickly than it did when the blocks were transferring. If you leave for even 5 mins it will be OK.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green. ____________________________________________________________________



Connect the null modem lead to the box and your PC.
Click on the stblink5.20.zip file and choose run.
Do not do choose the setup comm.
And ignore any errors you see.
Remember UNTICK maintain user data.
Select upgrade software
Get the 913 file from your PC.
From when you see the blocks start to transfer.
It takes 4 mins for the box to be updated.
But make sure you see the led flashing much more quickly than it did when the blocks were transferring. If you leave for even 5 mins it will be OK.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.
Then connect SCART and TV cables.

Then scan for channels.
In Dublin
Start Frequency 290
End Frequency 419
Symbol Rate 6887
Constellation 64 QAM
Search by Network ON
This scan should find all your channels in about 5 mins
When all channels are found Select View

When the channels are found the box might be locked, 0000: scrambled
To unlock the box.


Menu.
User Installation
Parental lock
Current password 0000
Parental lock –off
Install lock ----off
New password 7777
Confirm password 7777
Exit to TV Screen,
You need to go to parental lock again
Current password
Type 7777
Goto key manager.
Current key----ok
Auto update -----on
Exit to TV screen and you should be sorted.