Replay Lite

Kardz did you ever have chelsea tv on your box, I have checked a few uk frequency lists and its not on any of them, also read somewhere you don,t get it in uk don't know how true that is. Maybe if someone has it they can post the frequency to sort you out.

hope it helps.

 

ye i did b4 wen i jus step up my box but wen i did another auto search it didnt come bk, ever since tht tym its neva around

 

sorry can't be of more help if i find anything i will post

 

to anyone i tried the 742a then the 744 then the 915 and all i got was clock and a red light left it for about an hour and switched it of connected it up and it comes on with green bars and says boot then ooand a red light when you switch it on it goes through the same again any ideas plz

 

If this a Replay Box PVR,Don't use 744

You need to flash it with 742A,

Unplug the Box,

Flash with 913.

Unplug the Box.

Then put a channel dump file on it, any channel dump file will do.

Even if it's not from your area and the frequencies are wrong,

It will kickstart your box and then you can do a new search for channels.

I posted on the previous page how to load a channel dump file.

You might try loading the channel dump file before you do anything else,, if it doesn't work flash the PVR as above 742A/913


This method has worked before, hope it works for you M8ty

 

Hi moggser no the box wasn't dropped just no sound available. Think I'll need the solder for this one

 

Hi buzzymcg,

You might want to drop the Manufacturer an email and ask them to send you a drawing of the components on the Circut Board.

Me thinks thats were the trouble is, use Low Melt Solder if you have it.

Here's their site,

http://www.rayyonics.com/home.aspx

 

Hi buzzymcg

Sounds like its time to do the old process of elimination. I would advise you start with the scart cable and replace it with another as this carries both sound and audio and can easily get damaged or worn.

Sorry just read after I posted that you had already tried this. I think Brian has the right idea.

One last thing that might be worth a shot. If you have a tv which takes component av cables (Red, Yellow & White) try a set of these to connect the replay directly from the corresponding component sockets on the box.

 

BRIAN 1956
i did what ya said,but when i scanned between them numbers nothing happened,so i started scsnning from 163 upwards,i got the lot working.cheers me man,with out your info id have binned the box,thanks very much,your a gentleman
matt

 

Hi Brian,

Very quickly..... did ye see the PM i sent you?

prawny...

To Site Admin: apologies if this isnt the way to alert somebody.

 

Just sent you a reply Prawny M8ty (")

 

Got that problem sorted folks thanks for the advice it just needed a small bit of solder.

 

good to hear mate now we know how to sort that one lol

 

Hi Mattiem,

Could you give me some feedback on your Start and End Frequencies and how many channels you found during your recent scan.

Thanks.

 

Hi Can anyone help.
I want to record from a replay lite box to a VCR. The TV has one scart (the only one) connected to the box. The cable aerial connector is to the box too. How do I connect the VCR so that it can record TV channels?

 

You will need 2 scart leads.

First scart goes fron your box to the "scart in" on your video.

Second scart goes from the "scart out" on your video to your TV.

Put your TV on the station number you normally watch your Videos.

On your video go through the channel numbers until you see the picture coming through your video from the box on your TV.

If you have a AV button on yout video you wont have to do the last step.

 

hi brian, hope you ok, just on here to see how everyones keeping, no problems to talk of with my box, just thought i would see if any new info has come out..otherwise alls well. so if your going on holiday soon, have fun and chat soon. cheers again for being so helpful on here. bye 4 now