Replay Lite

can anybody flash my replay lite box 4 me as i do not have the cable required im in the dublin 8 area....

 

debic many thanks,do i have to do a scan or anything thereafter? these boxes only stopped working yesterday and are not giving me the red button option anymore to manually enter the codes,so if i have to scan how do you do it? thanks in advance

 

Thanks for the advice gman496 it was confusing me

 

HELLO BOLDBABY,

CLONING THE REPLAY LITE


Simply plug in the set up (master) box – attach a null modem cable to the back. Take the new box, put it on top of the master, plug in the null modem lead THEN FINALLY plug the power into the second unit. It will then start cloning from the master. The red/green will flash. Red – green slowly
When the red/green light starts blinking very rapidly – it’s cloned IMPORTANT UNPLUG THE CLONED BOX FIRST


HOPE IT WORKS FOR YOU.

 

HI ALL,

I HAVE AN UPDATED 752 BOX. I HAVE NOTICED IT WON'T WORK WITH PASSWORD 7777, BUT WILL WORK WITH PASSWORD 0000.
ANYONE HAVING PROBLEMS WITH NEW CODES MIGHT TRY THIS.
PARENTAL LOCK 0000


BOLDBABY, DID YOUR BOX CLONE OK???????

 

Hiya there, I have been looking for a Serial Null Cable Modem 9-Pin Female to 9-Pin Female in the search engine and have noticed that the connections at the back of my pc and RL are both different sizes. Do they come in different sizes as i don't want to go out and get one if it won't fit...ty Lynn

 

LynnA,

Has the connections on the back of your PC got pins sticking out of it? If it has is there 25 of them? it sounds like a 25 pin Serial connector. It must be a pretty old PC?

Are you sure you're not mixing them up with printer or monitor ports?

 

hiya Gman ..just got the pc last year from dell...i just looked at it and it has 24 pins .. lynn

 

hiya again Gman. i forgot to say that it has holes and no pins sticking out of it ...lynn

 

brian ill be doing it later... thank you for the advise ill let you know how i get on..

 

I,m not doubting you but I'd say you miscounted ;-) they can be only 9 - 15 or 25 pin. Anyway it sounds like ypu may have the 25 Pin serial port & if you do you can get a 25 to 9 Pin converter or a 25 to 9 cable.

You could also go with the USB to 9 pin

You can see a picture of the 25 to 9 connector here:
http://www.microbarn.com/USBAdapters_ADA-USERIAL--18-162-100099.html?source=gadwords

 

Hiya Gman, sent you a pm, lynn

 

saintpats
If you have already done a scan and the channel names were already showing on you box but were scrambled then you shouldn't have to do a scan again. But if you ahven't scanned before you will have to. Its not difficult. Will only take a couple of mins.

 

aidodub
forgive me for being geographically challenged but where is Dublin 8. I'm on the northside and could clone your box but I don't know how far you are from me,.

 

I am also looking for someone to flash my replay lite box as i do not have the cables or access to a PC if there is anyone in the Northside Dublin 7 area i would be grateful.

 

brian1956 i did that and it worked good man thank you

 

can some one please send me the old replay lite 742a firmware.thanx

 

debic i am in the liberties area how bout u.......

 

gerbhoy
i'm on the northside and i'll clone your box for you.

 

aidodub just p.m'd you