Replay Lite

dont worry about the full stops as they will input thenselves

 

the red light still stays on no matter what i do,cloning or upgrading 7.44 or 7.52 which i have done successfully on at least 15 other boxes.once the red light stops flashing it goes to a solid red.i left it for a couple of hours and it still stayed the same.with the comp upgrade i still cannot get a connection becsuse the red light is always stuck on.

 

been lookin on here for days now and still cant get my box sorted can any1 help please.tryd all suggestions to get it working but it still does the same thing evwerytime.cant get into current key at all,and evertime i exit after changing codes it goes back to other settings. is my replay lite box naffed.

 

Yo COMPILLIT

I had a box like that before, the box just went to red. I did manage to get the box working by doing the following

connect as usual, in stblink 5.20 untick the keep user data select the firmware file then upgrade with 744 This seem to force the upgrade down to the box. wait for the rapid flashing LED. Power down/up the box seems to be ok. then clone the box from an upgraded one.

Best of luck bud.

 

thanks BRIAN 1956,tried that but to no avail,the problem is i cant get a connection withe stblink5/20 on this particular box,i can with my other one.on cloning and downloading the box flashes and then stops after a few minutes to a solid red,it never flashes rapidly.

 

returned box to 7.42a and then to 752,got all the stations back,green light on but no sound on any of the channels.tried 742a again then 744 and finally 752 again,same result ,great picture but no sound.disconnected power a few times but no joy.

 

I have seen this happen too, I just put it on one channel & leave it & the sound eventually came in.

 

tried it with 741a and then cloned it to my working box,still the same,very strange

 

brian i just flashed my box to great success thank you for your link it was very helpfull....i tought after i flashed my box that my codes when changed would update themselves do u kno anything about that.......

 

HI aidodub,


TO MAKE SURE BOX IS PROPERLY UPDATED.

GO TO MENU
UTILITY
RECEIVER INFORMATION
OK
"RECEIVER INFORMATION" SHOULD POP UP
SW VERSION SHOULD READ :7.50
HW VERSION SHOULD READ 1770-1.0-CS100

IF THE ABOVE ARE THE SETTINGS ON YOUR BOX, IT WILL UPDATE AUTOMATICALLY. IF YOU HAVE ANY TROUBLE WITH SOUND, SIMPLY TURN OFF/ON THE BOX ON THE CHANNEL YOU HAVE A PROBLEM WITH AND IT SHOULD BE OK.
ITS BEST TO LEAVE THE UNIT SWITCHED ON FOR A COUPLES NIGHTS.

HOPE EVERYTHING OK FOR YOU, AND GREAT SUCCESS!

UP THE DUBS ( I LIVE AROUND THE CORNER FROM PARNELL PARK )

 

just checked that all is well with stations i just tought the codes would automaticly change when n.l changed them...sw version reads 7.52

 

shouldn't it read 7.52

 

It should indeed,
I think Brian's reference to 750 was just a typo.

 

7.52 IS CORRECT

 

HI KIDS,

NO TYPO,

SW VERSION 7.50
HW VERSION 1770-1.0-CS100

THATS WHAT ON MY BOX. AFTER I FLASHED WITH 752.
MY BOX WORKS FINE AND UPDATES THE CODES AUTOMATTICALLY.
ANOTHER MYSTERY--------------TO SOLVE
SUCH IS THE LIFE OF BRIAN

 

well brian if u do solve it let us kno............

 

hiya can anyone help me please...i bought a null modem cable 9 pin female to 9 pin female from shop , but it never came with cd rom. Can anyone tell me where i can get one please, and the instruction on how to do the updates please on my RL...ty lynn

 

HI aidodub,

I WAS UP IN MY MOTHER IN LAWS EARLIER THIS EVENING, SHE HAS A 752 JUST LIKE YOURS AND SO HAS MY MOTHER (OLDEST WOMAN IN ALL OF KUSACK)BOTH BOXES ARE UPDATING ON THEIR OWN.
FUNNY THING THOUGH,BOTH BOXES HAVE THE 752, MOTHER IN LAW IN ARTANE HAS INFO BUTTON WORKING AND THE ONE IN DONNYCARNEY HAS NOT.

SO YOUR BOX SHOULD BE FINE WITH YOUR SETTINGS.
IF IT'S WORKING AT THE MOMENT-HAPPY DAYS.

WELL DONE ON FLASHING FOR THE FIRST TIME.

THANKS TO ALL FOR UPDATES AND INFO.

 

Tried to get Null Modem cable in PC World, Liffey Valley. No joy. Where in Dublin can I get one? In the meantime, has anyone got codes for RL that work on N*L Dublin? Help!!

 

HELLO LYNNA IN BONNIE SCOTLAND.
BRIAN1956 IN IRELAND HERE.

THE INSTRUCTIONS ARE IN A WORD DOCUMENT IN THE ZIP FILE.
THE MOST IMPORTANT PART OF FLASHING IS BEING PATIENT.
DOWNLOAD THE UK 752 FILE FROM THE LINK BELOW.
The file below contain Replay Lite Software version 7.52, the STB/PC interface (stb5.20) and full instructions tailored for THE UK.
YOU DON'T NEED A CD TO DO THE UPGRADE, EVERYTHING YOU NEED IS IN THE FILE BELOW.


UK http://rapidshare.com/files/35886412/Replay_Lite_752_uk.zip.html

A Null Modem Cable is required which you already have.

BE PATIENT WHEN FLASHING YOUR BOX FROM YOUR PC. THE LED WILL FLASH RED/GREEN WHILE THE FILE IS BEING DOWNLOADED TO YOUR PC. YOUR PC WILL READ TRANSFER COMPLETE---IT TAKES A LITTLE MORE FOR THE BOX TO UPDATE, EVEN AFTER YOUR PC READS TRANSFER COMPLETE--WAIT TILL THE LED IS FLASHING MORE QUICKLY THAN IT WAS WHEN THE FILE WAS BEING DOWNLOADED FROM YOUR PC TO YOUR BOX. THEN UNPLUG THE NULL MODEM LEAD BEFORE YOU REMOVE THE POWER LEAD. THEN THE POWER LEAD CONNECT YOUR TV CABLES AND THEN THE POWER LEAD. THE BOX WILL COME ON AND IT WILL TAKE SOME FOR IT TO UPGRADE. GO TO ONE OF THE MOVIE CHANNELS SAY 77 AND WAIT UNTILL THE CHANNEL COMES IN.
IF YOU HAVE ANY PROBLEMS WITH SOUND TURN YOUR BOX OFF AND THEN ON AGAIN, THE SOUND SHOULD COME IN AGAIN. LEAVE YOUR BOX ON FOR THE FIRST FEW NIGHTS AND AFTER THAT YOU CAN LEAVE IT ON STANDBY. NEVER UNPLUG IT.
ABOVE ALL BE PATIENT,



GOOD LUCK LYNNA
BRIAN1956 and my 3 WESTHIGHLANDER TERRIERS.