Replay Lite

hi boldbaby
as far as i know magnet sends their signal via a modem and i don't think it'll work with any type of box replay or otherwise.

 

hi all just letting you know if you dont have setanta sports 1 you need to rescan.... mine is up and running now

 

how do you rescan? and does it affect the cloneing?

 

As posted in previous threads you can speed up the time it takes to do a complete scan by changing the "Start" & "Stop" frequencies.

You set the start frequency to 338.6Mhz instead of the normal 162.00Mhz.

Does anyone know what you should set the "Stop" frequency to?

 

i lost both setanta 1 and 2 recently but i got setanta1 back by deleting it and rescaning this hasnt worked with setanta2 which is still scrambled for some reason, anyone any ideas....

 

setanta 1,2 are coming up as 1801 scambled instead of 1800....any 1 know wats goin on wit them???

 

Problem sorted

 

Yeah when the setanta's show 1801 scrambled its because the GAA is on, setanta dont have the rights to show the GAA in Ireland so its only available in Britain

 

im using replay lite on tw does anybody know if you can do a rescan just to pick up any new channels or lost(deleted channels without losing all your saved channels from previous scans as recently i have lost a few channels that say 1800 scrambled on it. I have 7.52 and have no problems with codes.

 

I'm sure you can go into "Manual Scan" & scan individual channels.

 

Hi all!!!!

Im new to this so please bear with me!! And im a woman which is probably worse when it comes to this ha ha, I live in Dublin and I have got a Reply lite box which is working fine I have Setanta Golf but I dont have Setanta sports 1 2 or 3 am I meant to have them and if so I would be very grateful if you could let me know how to do it.

Thanks

Millie

 

gman thx but when you go and try manual search you need to add the frequencies of the channel you are searching for etc

 

Anyone know if the rf output is supposed to work on these> I can get a pic with the normal scart, but the rf out put (old fashioned aerial lead) - i cannot get a pic via that. The reason i want a pic via the rf output is that i have my existing system split through an aerial booster and into diff rooms, now this works normally when i have done with my sky or ntl box, so why not with this? Is it disabled, do you have to enable it and if so - how?

Thanks for looking

 

does anybody know what the story is with Setanta 2 mine is just constantly scrambled but the program listings in coming up in the EPG, does anyone have the same problem......

 

Right now Set SP 2 is showing a rugby game , I have a starvi*w and its ok on mine , sorry I dunno if there is a problem with Replay , What area/location are you in

 

Hi, I have a replay lite box that got messed up. Im assuming its the:

OMEGA
STi5518BQC
DIS-VG10280
220XK VG
MLT 22 619

Im just wondering if anyone nows a site or place i can get the flash software for the chip. My friend messed up his box by cloning it off another cloned box. now the box doesn't even switch on. Im planning to force the software back on to the chip which should will make the box switch on. You can email me at productions.cr@hotmail.com
Thanks.

 

If you live in ireland setanta 2 is scrambled anytime they show GAA, otherwise the odd time they show aussie rules and football highlights from germany.

 

Hi Mille.

you may have to do a rescan, you should have setanta 1 and 2 and the golf but no other setanta stations that im aware of, if you live in Ireland Setanta 2 is generally scrambled as this is to do with an issues rights of what sports it can show on that station but the odd occasion it will show aussie rules and the likes.

 

Hi techkid,


and anybody is has a frozen replay lite, the red led stays on.
The reason why this happens is unplugging the box before the flash is complete. When files are transferring from your PC to the Box you will see the led flashing red/green slowly....WAIT untill you see the led flashing much more quickly, this happens about a couple of minutes after all the blocks have been transferred.




Download the file from the link below. It's 742a file.
http://www.speedyshare.com/480850955.html

Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidily than it did when you could visibly see when the blocks were transferring.
Unplug everything and only connect the power lead.
Wait for the led to flash red/green and then stay on green.

Then flash with 744

http://www.speedyshare.com/166633270.html

AND FLASH WITH 752 OR CLONE WITH SOMEONE WHO HAS 752 ALREADY IN THEIR BOX. Each of the files below contain Replay Lite Software version 7.52, the STB/PC interface (stb5.20) and full instructions tailored for either UK or Ireland.

UK 752 http://www.speedyshare.com/859117548.html

IRL 752 http://www.speedyshare.com/262600882.html

A Null Modem Cable is required which can be purchased for €18. from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ

Flashing your Replay Lite Box

Before you start you must have the following:


click Stblink5.20 Client and UNTICK the maintain user data box.

select upgrade software,

upload the 744 file.

There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
IMPORTANT
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. THE LED WILL FLASH RED/GREEN.
WAIT UNTIL THE LED STAYS ON GREEN.
THEN RECONNECT NULL MODEM LEAD AND UPGRADE WITH 752, AS ABOVE.

ANYONE UPDATING FROM 744 TO 752.

Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button on the stb link 5.20 If it’s connected a blue line will move from left to right confirming that a connection has been made.
KEEP MAINTAIN user box TICKED Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 752


There are 515 blocks of information to be downloaded. Allow the link to download and write the information to your box. During this time you will see the LED light on the Replay Lite flashing red/green approx every second.
When all blocks are transferred, your pc will read all transferred.
WAIT for another 3-5 mins, the box will take a little more time to read the blocks, even though your pc has read all transferred. WHEN the led flash much more quickly than it did when the where being visibly transferred, the box is upgraded.
EXIT STB LINK AND THEN UNPLUG THE BOX AND NULL MODEM LEAD.
POWER UP THE BOX AGAIN. Your unit should be flashed and ready to use.



If you already had your channels tuned in they will be still there, flick through the channels until they unscramble. It can take up to a minute or two to find the codes from cable network.

If you have no channels you’ll need to do a channel scan. Go to Auto Search. You will note that the Symbol Rate is set to 6887 & 6952. LEAVE it at this symbol rate as some of the channels have been changed. Now press search and it will take about 30 minutes.

During the search it will not start to find channels for about the first 5-10 minutes as it has to go through all of the frequencies. It will eventually find around 242 TV and 63 Radio but it will reduce this amount to around 130 TV and 40 Radio as it deletes the duplicates. When it is finished scanning the “Scanning” button will change to “View”

Press view and this will save your channels.

If you see 1800 Scrambled – just wait a minute or so for the keys to update. You will only have to do this once.

Once your first scrambled channel comes in – they all will!

There is a small glitch in the software which means that the “info” button is not working. A patch will be developed for this.
IF YOU HAVE TROUBLE WITH SOUND, SWITCH OFF/ON THE BOX AND THE SOUND WILL BE OK


Setting up the Favourites Menu

1. Press the menu button
2. Navigate to the Channel Manager Section (top of screen)
3. Go to the TV Channel section and press OK
4. The TV Channel Manager is now available
5. By default you are now on Favourite 1 (pressing the RED button will take you through favourites 1-8).
6. Pressing the GREEN (edit) button allows you to change the Favourite 1 Menu to something more appropriate. I’ve set my favourites 1-8 as follows
a. 1. Popular TV
b. 2. Movies
c. 3. Sport
d. 4. Factual
e. 5. UK TV
f. 6. Music
g. 7. Kids
h. 8. Your Choice

7. When you press the Green Button you will have the option to RENAME FAV (navigate to this and press OK). You can now manually rename the Favourite to what you want,
8. As you scroll through the channel listings you can add your favourites as follows. If you have a favourite called Popular TV you may want to add the standard freeview channels. When you navigate to BBC 1 press the OK button and a Smiley Face will appear next to the channel – this means it has been added to this favourites menu.
9. When you have finished (with for example – Popular TV) press the RED Button and you will now be on Favourites 2 (pressing the RED button will scroll you through each of the EIGHT Favourite menus). If as I’ve done you’ve renamed Favourites 2 to Movies you may want to add Sky Movies 1/2/3/4 etc
10. When you are finished with your favourites – press exit and the data will be saved.


ABOVE ALL BE PATIENT,

GOOD LUCK ALL
BRIAN1956
http://www.iol.ie/~bullwallbarkers/colleen.html



The mediocre teacher tells. The good teacher explains. The superior teacher demonstrates. The great teacher inspires."- William Arthur Ward

 

Hi Brian , I remember you had to delete the GT ROm from your registry , do you sill have the info cos I cant find it anywhere , please