Replay Lite

Hi Ciaran87.

Welcome to the forum.

You need to go to the link below my picture at the bottom of the page.

Go to the replay folder,


In Documentation folder download the file “flashing the replay lite”
This is a guide that you show you how to update your box, step by step.

In the firmware folder,
Download the 752 file to your desktop.
This is the file that needs to be transferred to your replay lite box.

In the software folder,
Download the stblink 5.20 to your desktop.
This is the programme that will transfer the 752 file to your replay lite.

Go to Maplins and buy a Null Modem Lead Part Number L71BT
Don’t accept anything other than L71BT, there are similar leads.

Then follow the instructions on “flashing the replay lite” Document.

The most important part of the procedure is when you have everything hooked up and the file is going from your Computer, the red/green light on your replay lite will blink slowly, when your computer reads all blocks transferred, WAIT another couple of minutes, it takes the box a while to read the updated file, You will know the transfer was successful when the red/green light is blinking much more faster than it did when you could see the files visibly transfer.

It takes roughly four minutes from the time when the new file is going from your computer to the replay lite box to be complete.

But wait for the extremely fast blinking red/green light.

Hope this helps you brother.

Got to go and now and take the DAGS for walkies.

Hope you like DAGS

 

Is there an update after 752 with info available for the replay lite.

 

No!

 

This is a 2006 version and yes you can. But if you got it recently it is probably a clone so only put the Feb firmware on it as any versions after that will brick the box.

Click the link at the end of my post called SV EV Info.

 

Thanks sc0user,

I will pm that to lyndon, just in case he's not online.


Hope You are well my friend, I see You have become an Afterdawn Addict

How's the therapy going?? he he he

 

Hiya Brian,

I need therapy most days when I finish here

Hope I find you well

 

Me is doing well sc0userhope you and yours are all well and happy and healthy.

I'm off to a wedding tomorrow, so this time tomorrow night, I won't even know my own name, 2 pints and I'm in cuckoo land.

Hope you liked those funies, I emailed you.


Cheers sc0user
You got a handy draw in the champions league

 

LOL hope you enjoy the day Brian. Yes I got all the funnies and cheers for them boy you must trawl the web some really good ones there

Regarding the draw its Europe so all games are hard...........unless you are Liverpool where they make it look easy

Gonna head soon Brian as it is a quite one tonight, waiting on one or two queries to come back so I will bid you a goodnight

 

hey brian the last time we spoke it was about the stations not there and no one around might not have them
well im missin other channels too livin+ more 4 other ones like that is there reason for this have the dark side done somethin

oh yeah robocop othere nite class film alright

 

Thanks a million brian -thats fantastic i`ll get cracking on downloading this now

 

If your machine(PC) has a 9pin Serial port then L71BT is what you need (see link below).
http://www.maplin.co.uk/Search.aspx?criteria=l71bt&source=15&SD=Y

The one in you post is for a PC with 15 pins(& yes that is the L72BT)

 

Thanks again Brian and Scouser,
checked your info out, it turned out to be clone like you said.
all working ok with the feb update.
cheers
lyndon

 

Brian and/or Scouser,

Can you help me out? Most of my mates have the Replay Lite which I've flashed with autoroll for them, although typically one of them has been arkward and got a cloned Starview (not the box). Can you tell be which version of the software I need to use in Dublin as there are about 6 or 7 different bins on eamos?

Also, is there anything I need to watch out for when flashing?

Cheers guys.

 

Hi , I hope this helps

Are you sure its a clone ?

If so you will need the 2.57_fixed file , it can be found in Eamo site in my sig

You also need to download the GT ROM Loader in the softwa*e folder ,

Updating Firmware

Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)

Open GTROM Loader software make sure that you set the correct COM PORT that matches the one that is being used

Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.

Run the GTROM loader by pressing Download and you will see the % progress increase then Download completed message on your PC.
Wait until you see the DOWNLOAD COMPLETE pop up on your PC before
removing the NULL MODEM CABLE. The Starview will then reboot

Turn off then plug your tv cable and scart back in

 

Cheers Celt.... I'll give it a go!

 

If you have more problems you could go to this thread and it has lots of info for the SV

http://forums.afterdawn.com/thread_view.cfm/531363

 

Busy one tonight Celt

 

Glad you got it sorted. I only seen your query yesterday and Brian said he would get it to you and always he is a man of his word

 

Hi red05

hi brian can you tell me, if I purchased a replay lite box from a normal retailer rather than eBay, and box came blank, what software would I need to get ,to get it working up to the standard you can buy off eBay ready to just to plug and play?..

Sorry for the delay getting back to you, I was at a wedding Saturday and was wrecked on Sunday. I had Insomnia and was trying to sleep it off.
It is better not to put things in my shoutbox as I seldom view it.
Post them here and the rest of the clan are always about willing to help.


If you know someone with a working box, you can clone the new box from theirs.
If you can’t do that, the following will help you out.

ALL THE FILES REQUIRED AT
http://eko.4shared.com/

A guide to flashing can be found in DOCUMENTATION.

You will need a null modem lead to transfer the files from your computer to your box.
Make sure the null modem lead has part number L71BT OR L72BT on the front of the cover. Depending on what port you have on your computer.
Do not accept anything that does not have these part numbers.
A Null Modem Cable is required which can be purchased for €18 from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online UK for a fraction of the cost plus postage. A couple of examples of where they can be purchased online are these links, thanks to gman496

Serial Null Modem 25-Pin Female to 9-Pin Female.
http://www.maplin.co.uk/Module.aspx?ModuleNo=97784&&source=14&doy=2m9


Serial Null Modem 9-Pin Female to 9-Pin Female.
http://www.maplin.co.uk/Search.aspx?criteria=l71bt&source=15&SD=Y




STB LINK FILE 5.20 FOUND UNDER SOFTWAREThis is the programme that will transfer the firmware to your box.


AND FLASH WITH 752 FOUND UNDER FIRMWARE Flash the box. Remember UNTICK maintain user data.
Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring.
Unplug everything and connect the power lead and TV and SCART leads.
Your box should be now ready for a rescan.

DOWNLOAD THE REPLAY HANDBOOK IN DOCUMENTATION.

Hope this helps you red05,

Apologises for not geting back to you sooner

 

To use parental lock on the replay lite box.


You need to go to parental lock.
Your current password is probably 7777.
This needs to be changed to 0000 for parental lock to work.
After you have changed the password to 0000.
Exit back to TV and go into parental lock again and switch it to ON.


Go to channel manager-TV channel.
Scroll to the channel you wish to have locked.
Press the green button on your remote control to edit the selected channel.
Select lock, you will be asked to enter password, enter 0000.
The channel you have should be highlighted in yellow.
Press ok on your remote control and a lock symbol will appear beside the selected channel.

At this time you can scroll to any other channel and press OK to lock them also.
Exit to TV screen.


When anybody goes to select the locked channels they will have to enter 0000 to view.


To unlock the channels.

Parental lock off or
Go to channel manager select the locked channel
Edit, enter password, press OK and the lock symbol will disappear.
Exit back to TV screen