Replay Lite

missed a bit there too. i did wait for the fast flashing, i actually sat there for a while watching it, as i thought you had to wait for it to stop, so def didnt pull the plug too soon.

 

brian, can i give you a call or you ring me, please. i can explaiin better over the phone. i cannot use those instructions you mentioned as the box will NOT COMMUNICATE WITH MY PC. i cant establish a connection since i used the favourites update. seriously, thats what happened. i would use that stb 5.2 if i could but the box is not responding, it turns on then flashes red green for a couple of seconds, then back to red and so on. but the main thing is that you cant flash the box anymore at all. 0eight 7 one 3 eight 9 six two five. and again apologies for the atitude, im just distraguht that the box is fooked.

 

givyjoe,



CLONING THE REPLAY LITE

If you have flashed a box and set up the favourites in order you can clone the data on this box to another.

Simply plug in the set up (master) box – attach a null modem cable to the back. Take the new box, put it on top of the master, plug in the null modem lead THEN FINALLY plug the power into the second unit. It will then start cloning from the master. When the red/green light starts blinking very rapidly – it’s cloned 

From the moment you plug in the second box it takes 3mins 46secs to clone, so 4 minutes should be sufficent to get your box up and running again.

 

brian,
all sorted thanks again

 

my pleasure lyndon70,

Me and Mrs56 went to see 3.10 to Yuma tonight, very good movie

cheers m8.

 

To backup your saved channels and favourites.

Connect the null modem lead to your PC and box and power up the box.
Open up the stb link.
Setup Comm.
Click Read User Data
The file will be called Factory_Data.txt
There will be 64 blocks to download from the box.
Save it to your desktop and rename it what you want.

If at a later date you do a full rescan and find nothing,
You can reload the file you have saved on your desktop.
But when you have established a connection with the stb link
Click Write Factory Data and get the saved file from your desktop.
There will be 64 blocks to upload.
Make sure as always to wait for the rapidly flashing light.

 

brian my man i awoke this mornin and found couple o chanels gone west ie rte 1 an 2 tv3 and something else error message is no video signal is that due to works withh the darkside?

 

brian cancell that panic over just went back to the chanells ant there now dunno what that was really a little strange tho never seen that error message before

 

Hi moggser m8,

The Darkside are messing around again, their worse than the Bloody Romans.
I have a couple of scrambled channels and have done rescans and can't solve it at the moment.

RTE 2 is a freeview channel and the box should always get this channel, even if the Darkside is messing around, we should always be able to get this channel as it isn't scrambled.


Hope you are keeping well brother.
Cheers

 

hey buddy
im doin fine thanks
didn have rte 2 either i know there free so maybe whom of we should not mention was messin about it was only for few mins cause they just came back as quick as i knew they was gone

 

a friend of mine has got a starview box,but some channels are unavailable, can any one tell me codes or info needed to unblock unavailable channels? do i need a lead or can i use his remote to get box working properly? any help much appreciated. thanks

 

al remotes usually work on each others box so you can do a factory reset then auto scan an make sure the emu is on an that should beyou

 

one more question i forgot to ask in relation to starview box of my mate, is there software?or codes? or both i would need to unblock channels he has not have? any help would be appreciateed thanks

 

well there is both codes and software where are you living??
and missing channels i get that and as far as i can gather from wherei am it is a weak signal from your provider might be wrong so don entirely quote me on that

 

Hey guys does anyone if a patch has been released for 7.52 that fixes the info button problem in ireland yet? Or does anyone know when the next firmware is out?
Cheers

 

Hi Damoirl,

No sign of the patch or the new firmware yet, guess it's still the TV Guide for now.

 

does anybody know if the new LFC TV is on the Ntl epg yet and if so what frequency is it on the box...

 

living in gloucester, my friends starview has some channels unavailable,got a remote, but no emu button on it,and unlike my replay lite, he has no disc for downloading bins if needed.also he uses rs cable to usb, so with this info, can any one suggest a way that i could help him get his channels back?

 

when using manual scan on replay lite box, anyone know the frequency for the new LFCtv channel?and how to get it? thanks

 

i'm in Dublin and havnt been able to pick it up yet