Replay Lite

It dosen't come on it just sits there with the red light on. I've tried powering on and off.

Any ideas

 

Have not got a clue mate, sorry, not something I have come across b4. You may have interrupted it during flashing, if so try establish connection with RS232 cable and pc again and let it complete. If not, no idea.

 

Hi there wondering if anyone can help, i tried to reflash my replay lite box with stblink 5.20 it worked to start with but now it dosent recognize my connection and the box dosen't seem to be responding. i am at my wits end with it. Any help would be greatly appreciated.

 

Just realised that you were referring to "RS232" cable in earlier post. This is a "straight" wired cable and is not suitable for this job. You need a Null Modem Cable as it is "reverse" wired. Not sure though if this has contributed to your problem.

 

Sorry to be a pain and I know I asked already but can someone please let me know where I an download firware version 744. Version 750 isn't working and I need to rollback.

 

hey everyone i am new to this and i am wondering on the key manager page why it will not let me in to the current key page and it will not reset. if anyone could help me taht would be great

 

I haven't tried software v750 & will hold off if people are saying that it won't work for Ireland?

Does anyone have or know where the latest version that will work in Ireland can be downloaded?

 

Thanks for the explanation Novice99, much appreciated.

 

If you cannot get your hands on 744 you may know someone who still has it on their box so you can connect to theirs and clone it from them.

 

That may be my only option. Thanks for the reply

 

do not g up am har to h 744

 

pc2000
what does your previous post mean.

 

Hi all
Living in Dublin, Flashed the box with new flash lost all channels, did an auto scan...
Frequency = 234-746
Symbol Rate = 6952
Constellation = 64
Can't change any of the above, comes back with “NO Programs Found”.
ANY IDEAS.... <<<<<<NEED HELP>>>> please

 

Hi
Also from Dublin and have the same problem. Info from another forum directs that:
Re-install your old firmware
Auto scan for channels
Update new firmware
When you update with version 750 do NOT scan for channels as they should still be saved from previous scan.
I'm trying to get hold of old firmware version 744 to give this a go. If you have it, please upload. If it doesn't work, just stay with your old version until a working version for dublin is available.

 

Havent got the old 744...If I come across it I will post it up

 

its mean i got the firware version 744 tk

 

Plug in the null modem lead, PC & Replay Box. Switch on Replay Box and press the Setup Comm button. If it’s connected a blue line will move from left to right confirming that a connection has been made.

Then press the Upgrade Software Button and choose the appropriate file for your box. The Lite file is currently Version 750.

There are 515 blocks required for each box. Allow the link to download and then WRITE the information to your box. On the Full Replay you’ll see the word GooD and on the Lite the light will stop flashing once every second to blinking ‘very quickly’ which indicates it’s finished. Do not unplug until the light flashes very quickly.Remove the power and plug it back in again.

 

ANY IDEAS.... <<<<<<NEED HELP>>>> please
stblink5.20 wen i tra to connect its sa connection error
or failed please help tk

 

pc2000,

can you post a link to Firmware v 744?

 

yes i can your e m p