1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

reset occured when burning

Discussion in 'DVDR' started by slothy, Jul 17, 2004.

  1. slothy

    slothy Member

    Joined:
    Jan 13, 2004
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    I've used dvd shrink and nero and have been successful 50 times in burning dvd's.... but now i keep on getting this error about reset occured. It normally happens about half-way through. I even try simulation before i would burn it and it also does it then. here is what it looks like from the nero history.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 4:25:04 PM
    Nero version: 6.0.0.11
    Recorder: <MATSHITA DVD-RAM LF-D311>Version: A125 - HA 1 TA 0 - 6.0.0.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 1024kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <LITE-ON LTR-40125S >Version: ZGS3 - HA 1 TA 1 - 6.0.0.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800BB-53CAA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 1 DMA: On
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 510MB (523056kB)
    Free physical memory: 155MB (158880kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    18.7.2004
    DVD-Video
    11:29:26 PM #1 Phase 112 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation started

    11:29:26 PM #2 Phase 114 File dlgbrnst.cpp, Line 1843
    DVD-Video files reallocation completed (no file modified)

    11:29:26 PM #3 Text 0 File Isodoc.cpp, Line 5771
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    11:29:26 PM #4 Phase 111 File dlgbrnst.cpp, Line 1843
    DVD-Video files sorted

    11:29:26 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    11:29:26 PM #6 Text 0 File Writer.cpp, Line 127
    Writer MATSHITA DVD-RAM LF-D311 running

    11:29:26 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
    First writeable address = 0 (0x00000000)

    11:29:26 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3854
    First writeable address = 0 (0x00000000)

    11:29:26 PM #9 Text 0 File Burncd.cpp, Line 3173
    Turn on Disc-at-once, using DVD media

    11:29:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 228
    Last possible write address on media: 2298495 (510:46.45)
    Last address to be written: 2286111 (508:01.36)

    11:29:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 233
    Write in overburning mode: FALSE

    11:29:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 1722
    Recorder: MATSHITA DVD-RAM LF-D311, Media type: DVD-R

    11:29:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 768
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [MATSHITA DVD-RAM LF-D311 ]
    --------------------------------------------------------------

    11:29:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 937
    Prepare recorder [MATSHITA DVD-RAM LF-D311 ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682264576, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286112 | lead-out | 1 | 0x00 | 0x41

    11:29:27 PM #15 Phase 24 File dlgbrnst.cpp, Line 1843
    Caching of files started

    11:29:27 PM #16 Phase 25 File dlgbrnst.cpp, Line 1843
    Caching of files completed

    11:29:27 PM #17 Phase 32 File dlgbrnst.cpp, Line 1843
    Simulation started at 1x (1,380 KB/s)

    11:29:27 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2130
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:29:27 PM #19 Text 0 File DVDR.cpp, Line 1485
    Recording mode: Sequential Recording Mode

    11:29:27 PM #20 Text 0 File Mmc.cpp, Line 18878
    Set BUFE: supported -> ON

    11:29:27 PM #21 Text 0 File DVDR.cpp, Line 1600
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:29:27 PM #22 Text 0 File Cdrdrv.cpp, Line 7906
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 30000 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:01:07 AM #23 SCSI -1114 File Cdrdrv.cpp, Line 1415
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07940000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x13 0x7A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    12:01:07 AM #24 CDR -1114 File Writer.cpp, Line 335
    Reset occurred

    12:01:07 AM #25 Text 0 File ThreadedTransfer.cpp, Line 227
    all writers idle, stopping conversion

    12:01:07 AM #26 Text 0 File ThreadedTransfer.cpp, Line 221
    conversion idle, stopping reader

    12:01:18 AM #27 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    12:01:18 AM #28 Text 0 File dlgbrnst.cpp, Line 1703
    Set remaining time: 0:00,000 (0ms) -> OK

    12:01:18 AM #29 Phase 34 File dlgbrnst.cpp, Line 1843
    Simulation failed at 1x (1,380 KB/s)

    If anyone knows what i can do please reply back to me.. thanks
     
    slothy, Jul 17, 2004
    #1
  2. Nephilim

    Nephilim Moderator Staff Member

    Joined:
    Feb 13, 2003
    Messages:
    13,161
    Likes Received:
    1
    Trophy Points:
    116
    Hi,

    Two things I see that may be problems.

    This....

    means that your burner is set to PIO which is an extremely low transfer speed and will most likely be a problem. The burner should be set to DMA for best performance. Here's a link that may prove useful:

    http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx

    The other bit that I noticed is that you're running a very old version of Nero and updating would certainly be a good thing :)
     
    Nephilim, Jul 17, 2004
    #2
  3. kbm

    kbm Guest

    I would first try enabling DMA on (MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 0 DMA: Off) .
     
    kbm, Jul 17, 2004
    #3
  4. colw

    colw Active member

    Joined:
    Apr 25, 2004
    Messages:
    1,602
    Likes Received:
    0
    Trophy Points:
    66


    As previsous replies have indicated try enabling DMA on all devices.

    ____________________________________________________
    DiskPeripheral : WDC WD800BB-53CAA1 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 1 DMA: On
    ______________________________________________________
     
    colw, Jul 18, 2004
    #4

Share This Page