sagem dbox pin

I have a second hand box and cannot get into the service menu as i dont have a pin , would anybody know the default , the image is sportster pro.

Thanks Grace

 

1111 dosent work ,can the pin be reset

 

Sportster pin default is 1811
If this dont work get back Paul

 

Thanks Paul ,

but that doesn't work either,it must have been changed.Any ideas would be appreciated. Is is stored in any file that can be altered ?

Thanks for your help

Grace

 

hi you said that it is a sagem? engineers code for it is 0044

 

Thanks , but that dosen't work

 

That will work for sure .....paul

Hi,

There are 2 methods to find the pincode on a dbox2

either ftp into var/tuxbox/config and view neutrino.conf, look for parentallock_pincode=####

the #### is the pincode.

If you want you can do it from the dbox
Choose Tuxbox Commander
var ok
tuxbox ok
config ok
scroll down to neutrino.conf ok
then scroll down to the line, it is in alphabetical order.
home
home

 

Thanks Paul , your a genius . Im in , im on chorus with a symbol rate of 6875 a bruteforce scan doesnt find anything so i had a look at the cable.xml file and its set up with the wrong symbol rates. Can I change this file manually as i know the freq and correct symbol rate or can i do a manual scan , for some reason this option will not highlight in the service many.

Thanks so much Paul for your help...

Grace

 

Depending on the image .
Fast scan may not be an option for you
Wot image is it ..............Paul

 

thanks Paul , that didn't work , its sportser Pro, i looked at the cable .xml and its not set up for chrous , thing is i cant get my laptop to see the box so cant amend this , i attached an ethernet cable and a null modem but it just doesnt see it , any ideas.

Thanks Grace

 

Upload the irish10 cables.xml to var/tuxbox/config, delete the file scan.conf in the same subfolder and pull the plug.
If you want FTPing to the box both devices must be in the same subnet. The first 3 numbering ranges of the IP's must be the same and the last different.
You need a crossover network cable for a direct connection to the box.

 

Thanks can you give me the link for the irish cable.xml. I got the crossover and can communicate with the box.

Thanks

Jim

 

http://www.4shared.com/file/23825731/da1fcb7a/irish10.html

 

Hi , i managed a reflash with blade trinity image, and copied the irish xml also. I still dont get anything on a scan , so i done a cable check is says no signal , i have the cable pluged in , any ideas.

Thanks

 

Which option did you try in the provider line?

 

The image is blade trinity dublin , i used chorus bf

 

Do you get true cable from chorus or chorus mmds?

 

true cable , have a eurovox working downstairs

 

Try a scan downstairs.

 

Thanks for your help , were now getting somewhere the scan found all the channels but cannot view them the active softcam is set to gbox , active ucode 001a , nagra rom status all enabled.

Are these correct