1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SCH-X496

Discussion in 'Samsung discussion' started by Mark13760, Apr 11, 2006.

  1. Mark13760

    Mark13760 Member

    Joined:
    Nov 13, 2004
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    16
    I have easy studio V2.0 with a serial data cable.
    I have tried on many computers to get this to work. When I get the software up it won't recognize my phone (comm port). The Comm port option is blank so you can't choose a comm port ( like it isn't connected). It has occasionally automatically loaded my phonebook into the software, but that is all it will do.
    Has anyone got this to work with this phone?
    I have also tried going through a serial to usb edgeport box ( connect the serial cable to the edgeport then the edgeport connects to the PC via USB), and still get the same thing.
    On a side note I have made sure the comm port is enabled and works, I use this comm port on my work pc everyday. Does something have to be done to the phone to get this to work ( like unlock it, whatever that means)?
    Any help would be appreciated.
     
  2. ZeroBite

    ZeroBite Member

    Joined:
    Jan 25, 2006
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11
    provide me ur IMEI pls
     
  3. ZeroBite

    ZeroBite Member

    Joined:
    Jan 25, 2006
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    11

    PLEASE TRY AT OWN RISK!!! I TAKE NO RESPONSIBILITY FOR YOU DAMAGING
    PHONE, UNLOCK CODES HAVE BEEN KNOWN TO LOCK PHONES UP AND THIS CODE HAS BEEN KNOWN TO DAMAGE PHONES BEFORE.

    Instructions
    Press *#06# and write down your IMEI
    Unlock Codes
    Code 1: *2767*688 then your IMEI and then press #
    For example *2767*688352708000828246# (Everything before the / for C225)
    Code 2: *0141#
    Code 3: 00000000 (8 zero's)

    Entering the Codes
    1. Switch your phone off. Remove the original SIM card

    2. Insert another SIM card from an alternative network. Power up your
    phone. You should now see the "Wrong Card" message.

    3. Type Code 1 into your phone, if this is entered correctly your
    phone screen should now turn black and reboot itself. (C225 doesn't go
    black but does reboot)

    4. After the phone reboots the SIM card will be recognized and your
    SIM will work. Be patient while your phone reboots and DO NOT press
    any keys. At this point the phone is "Temporarily" unlocked.

    5. Now at your idle screen type in Code 2 (*0141#) and hit the call button.
    This should give you a message saying the phone is "Personalized".

    6. Power off the phone and insert the original SIM, then power up.

    7. At the SIM code prompt, it will ask you to enter a password. At
    this stage enter Code 3.

    8. After entering hit "OK" and your phone should complete initialization.

    Your phone is now Permanently unlocked
     
  4. Mark13760

    Mark13760 Member

    Joined:
    Nov 13, 2004
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    16
    Thx for the help, but got it to work by removing easy studio 2.0, and using PIM and file manager 1.0 Linked up perfectly after doing that.
     
  5. b0ba

    b0ba Guest

    @ZeroBite

    On CDMA phone????

    You might be kidding!

    @all

    DO NOT! use those codes. They can KILL your phone and you will loose your warranty.
     

Share This Page