Simulation runs OK but burn fails at 2x Before last coaster creation , I had defragged drive, turned off virus scan; dropped burn speed to 2x rather than 4x to be safe, and ran the simualtion. I still got burned failed at 2X just afetr the burn started . Using Maxell MXLRG02 DVD-R (digitalfaq says that it is 1st class media ) Using DVD shrink and Nero 6.0.0.0 LG 4081b with Ver. A104 firmware (latest)set as master on secondary IDE Does the DVD player require periodic cleaning? If so, how? All I can think to do is reinstall Nero at this point? Any ideas? Any help is greatly appreciated. Here's the log file ..... Windows 2000 5.0 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/04/2000 8:39:44 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 02/04/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 0 TA 1 - 6.0.0.0 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 254MB (260224kB) Memory in use : 50 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.10.2004 DVD-Video 10:54:59 PM #1 Phase 112 File dlgbrnst.cpp, Line 1818 DVD-Video files reallocation started 10:54:59 PM #2 Phase 114 File dlgbrnst.cpp, Line 1818 DVD-Video files reallocation completed (no file modified) 10:54:59 PM #3 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:54:59 PM #4 Phase 111 File dlgbrnst.cpp, Line 1818 DVD-Video files sorted 10:54:59 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 10:54:59 PM #6 Text 0 File Writer.cpp, Line 127 Writer HL-DT-ST DVDRAM GSA-4081B running 10:54:59 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 10:54:59 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 10:54:59 PM #9 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using DVD media 10:54:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2286143 (508:01.68) 10:54:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 10:54:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R Disc Manufacturer: MXL RG - 02 Disc Application Code: 64, Disc Physical Code: 193 10:54:59 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2286144 (2286144) = #2286144/508:1.69 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [HL-DT-ST DVDRAM GSA-4081B] -------------------------------------------------------------- 10:54:59 PM #14 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to HL-DT-ST DVDRAM GSA-4081B on a DVD-R media 10:54:59 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder HL-DT-ST DVDRAM GSA-4081B for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387362816 10:54:59 PM #16 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 10:54:59 PM #17 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 10:54:59 PM #18 Phase 32 File dlgbrnst.cpp, Line 1818 Simulation started at 2x (2,760 KB/s) 10:54:59 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 10:55:00 PM #20 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 28:15,570 (1695570ms) -> OK 10:55:00 PM #21 Text 0 File DVDR.cpp, Line 1407 Recording mode: Sequential Recording Mode 10:55:00 PM #22 Text 0 File Mmc.cpp, Line 18119 Set BUFE: supported -> ON 10:55:00 PM #23 Text 0 File DVDR.cpp, Line 1522 Start write address at LBA 0 DVD high compatibility mode: Yes 10:55:00 PM #24 Text 0 File Cdrdrv.cpp, Line 7827 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:55:01 PM #25 Text 0 File Writer.cpp, Line 318 22:55:01.988 - HL-DT-ST DVDRAM GSA-4081B : Queue again later (Intervall : 23msec) 11:23:52 PM #26 Text 0 File WriterStatus.cpp, Line 112 <HL-DT-ST DVDRAM GSA-4081B> start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks 11:23:52 PM #27 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 11:24:28 PM #28 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 11:24:28 PM #29 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 11:24:28 PM #30 Phase 33 File dlgbrnst.cpp, Line 1818 Simulation completed successfully at 2x (2,760 KB/s) 11:24:28 PM #31 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 2x (2,760 KB/s) 11:24:28 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 11:24:28 PM #33 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 28:15,570 (1695570ms) -> OK 11:24:28 PM #34 Text 0 File DVDR.cpp, Line 1407 Recording mode: Sequential Recording Mode 11:24:28 PM #35 Text 0 File Mmc.cpp, Line 18119 Set BUFE: supported -> ON 11:24:29 PM #36 Text 0 File DVDR.cpp, Line 1522 Start write address at LBA 0 DVD high compatibility mode: Yes 11:24:29 PM #37 Text 0 File Cdrdrv.cpp, Line 7827 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 25E23F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:24:34 PM #38 Text 0 File Writer.cpp, Line 318 23:24:34.757 - HL-DT-ST DVDRAM GSA-4081B : Queue again later (Intervall : 23msec) 11:24:42 PM #39 SCSI -1061 File Cdrdrv.cpp, Line 1361 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09770000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0x86 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10 0x32 0x24 0x04 0x0C 0x44 0x86 11:24:42 PM #40 CDR -1061 File Writer.cpp, Line 335 Internal target failure 11:24:42 PM #41 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 11:24:43 PM #42 Text 0 File ThreadedTransfer.cpp, Line 221 conversion idle, stopping reader 11:24:44 PM #43 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 11:24:44 PM #44 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 11:24:44 PM #45 Phase 38 File dlgbrnst.cpp, Line 1818 Burn process failed at 2x (2,760 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 08/12/2003 9:28:47 PM File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 08/12/2003 9:28:47 PM File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/04/2000 8:39:38 PM File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 3:05:04 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Upgraded to Nero latest version (demo ) and managed to burn next disc okay I defragged again and it burned the burned the next one I tried . ...it then went back to making intermittent coasters . I tried using different media that I had (Sonyd04) It burned the next one okay. ...it then went back to making intermittent coasters . Defragged , tied again ... Getting either "Internal target failure" ot "Focus or tracking error" I previously used several 50 Memorex spindles with not one coaster, and then all of as sudden, the drive started to be flaky. I updated firmware, defragged and have gone to latest Nero version. I tried different media and its still hit or miss. Considering the use I put it to, can you wear out a DVD burner? Latest log is below .... 1 1 Windows 2000 5.0 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/04/2000 8:39:44 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM Nero version: 6.3.1.25 Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.3.1.25 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 0 TA 1 - 6.3.1.25 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8162 D: CDRom0 HL-DT-ST DVDRAM GSA-4081 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 305MB (312544kB) Memory in use : 40 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.10.2004 UDF/ISO compilation 3:57:49 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation started 3:57:49 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation completed (no file modified) 3:57:49 PM #3 Text 0 File Isodoc.cpp, Line 6083 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:57:49 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855 DVD-Video files sorted 3:57:49 PM #5 Text 0 File Reader.cpp, Line 126 Reader running 3:57:49 PM #6 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRAM GSA-4081B running 3:57:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 3:57:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 3:57:49 PM #9 Text 0 File Burncd.cpp, Line 3152 Turn on Disc-at-once, using DVD media 3:57:50 PM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 3:57:50 PM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 3:57:50 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R Disc Manufacturer: SONY04 - D1 Disc Application Code: 64, Disc Physical Code: 193 3:57:50 PM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:57:50 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVDRAM GSA-4081B] -------------------------------------------------------------- 3:57:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286112 | lead-out | 1 | 0x00 | 0x41 3:57:50 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 3:57:50 PM #17 Text 0 File Burncd.cpp, Line 4163 Cache writing successful. 3:57:50 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 3:57:50 PM #19 Phase 28 File dlgbrnst.cpp, Line 1855 Speed measurement started 3:57:50 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:59:25 PM #21 Text 0 File WriterStatus.cpp, Line 115 <HL-DT-ST DVDRAM GSA-4081B> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 3:59:25 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:59:25 PM #23 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 3:59:25 PM #24 Phase 29 File dlgbrnst.cpp, Line 1806 Speed measurement completed: 35.2x (48,600 KB/s) 3:59:25 PM #25 Phase 32 File dlgbrnst.cpp, Line 1855 Simulation started at 4x (5,540 KB/s) 3:59:25 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:59:25 PM #27 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 14:10,273 (850273ms) -> OK 3:59:25 PM #28 Text 0 File DVDR.cpp, Line 2000 Recording mode: Sequential Recording Mode 3:59:26 PM #29 Text 0 File Mmc.cpp, Line 20660 Set BUFE: supported -> ON 3:59:26 PM #30 Text 0 File DVDR.cpp, Line 2141 Start write address at LBA 0 DVD high compatibility mode: Yes 3:59:26 PM #31 Text 0 File Cdrdrv.cpp, Line 8230 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:59:27 PM #32 Text 0 File Cdrdrv.cpp, Line 1297 15:59:27.759 - HL-DT-ST DVDRAM GSA-4081B\H1 T0 : Queue again later 4:00:12 PM #33 SCSI -1039 File Cdrdrv.cpp, Line 1445 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09780000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x00 0xE3 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10 0x32 0x34 0x04 0x0C 0x09 0x01 4:00:12 PM #34 CDR -1039 File Writer.cpp, Line 304 Focus or tracking error 4:00:13 PM #35 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:00:13 PM #36 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 4:00:13 PM #37 Text 0 File DVDR.cpp, Line 2383 EndDAO: Last written address was 58111 4:00:13 PM #38 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 4:00:13 PM #39 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 4:00:13 PM #40 Phase 34 File dlgbrnst.cpp, Line 1855 Simulation failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 08/12/2003 9:28:47 PM File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 08/12/2003 9:28:47 PM File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/04/2000 8:39:38 PM File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 19/06/2003 3:05:04 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)