I have a question about slayer auto installer um, what exactly is slayer auto installer what does it do??? ????
Slayers AutoInstaller is a CD image distribution that, once it is burned into a CDRW media, allows you boot your modded xbox from the CD media. From there, you can isntall the EvolutionX dash board and other interesting software onto the hdd of your xbox.
Mind you, that your xbox will only read Slayers if a modified bios is loaded first. It will not load with the retail bios, as it doesnt not allow for unsigned code to be launched.
i was wondering if the auto installer disk will work if when i boot up my xbox it goes to the maintenance required screen?
What number does the maintenance screen show? p.s: to tell you the truth, it will not fiz your problem, unless*, your xboxdash.xbe is missing or corrupted. But i doubt it.
Also, check somewhere on this forums for a listing on what the numbers mean, on the maintenance screen. It somewhere in the xbox area.
Description: When you attempt to boot, a 'you need service' message comes up, and has a LED style number on thetop left hand corner. Here is what they mean. Disclaimer: This information is a believed to be correct, should be as close as it gets; Also: Bootloader stuff you should never see, since if it fails kernel doesn't boot. (thus you see no message) Code Who sets it - Description 0 - any - No error (duh) 1 - bootldr - Unknown exactly, something to do with checking the motherboard 2 - bootldr - Eeprom check failed 3 - bootldr - ??/not used 4 - bootldr - Ram check failed 5 - kernel - HDD not locked (retail bioses require the hd to be locked) 6 - kernel - Cannot unlock HDD 7 - kernel - HDD timeout 8 - kernel - No HDD found 9 - kernel - HDD parameters (PIO/DMA/or size {debug}, certain size minimum is required for debug) 10 - kernel - DVD timeout 11 - kernel - No DVD Founnd 12 - kernel - DVD parameters (PIO/DMA) 13 - kernel - Dashboard launch fail (due to missing/bad key, or anything else that would prevent it from running) and the dashboard didn't specify why it failed. 14 - dashboard - Error loading dashboard (dashboard generic error) 15 - - ??/not used 16 - dashboard - Other files to do with dashboard / dashboard settings (specific dashboard error) 17 - - ??/not used 18 - - ??/not used 19 - - ??/not used 20 - kernel - The dashboard was attempted to load and failed; It was a cold boot, and the dashboard didn't specify why it failed, but it (for some reason) needed to be noted that the dvd passed the challenge/response authentication 21 - anywhere - This error says that the machine was booted to display a error, basically someone told the machine to reboot (or launch a xbe) with this flag, and the error code just means its been rebooted by the flag
This error comes from installing the gentoox from the slayers I think.If you install everything except that it will fix it.Besides why would you use slayers evox when X-disk is better man.I would switch to that instead the Firefuckers X-disk V1.01 .It has pretty much everything updated,and has the x-switch which gives you the option to choose any dashboard you wanna use.