Hi all, I am trying to set up "The Box" for a mate of mine who is not too computer savvy. He is on Chorus Cable and is living in Sallins, Co Kildare. I have tried to set it up with codes I found for it but they are for celbridge and it doesnt seem to be working. When I scan it says 0 channels found. I have key emu on and the key data is set to: KEY 00 = 4B 7C D5 86 E7 01 CC 96 KEY 01 = 8E 8E 46 FD 36 28 A3 F0 I also tried to do a factory reset but still nothing. Any help would be appreciated. Thanks Kev
Is he on C****s true cable or MMDS ? If he is on mmds then he will need 'The Box T' the normal 'The Box' won't work on mmds.
Try do a manual scan with these frequencies below and see if he can get some channels with symbol rate 6875 , Make sure the incoming cable is in the "Cable Input" socket at the back of the SV 324.000 340.000 348.000 356.000 364.000 372.000 386.750 394.750 410.750 418.750 418.750 444.000 452.000 460.000
Hi, Just insert the name of what you want ie " starview " in the search section on the top of this page and sellers will come up. Garry
Hi, Thanks for the reply. Im going to try that later. Is there a firmware version or anything I need to download to get it working in sallins? Thanks again
Hi, If you are buying a starview then it will be "the box" as this is the latest version, make sure that you only download the gtrom loader and firmware from the " starview the box " section in the cable software files. The firmware for the original starview will not work on the box. Before you load the software search for instructions and write them down, its not hard to flash the box but its easier to do it step by step if its in front of you on the first attempt. On that note happy viewing. Garry