Starview 3 The Box Super - Flash Update fail...

hi allan2772 it might be a bad flash but reboot it might work but i think its cable works in the area

 

yes as i said,give it a couple of days,may resolve itself.

 

i have tried it in a couple of places,dublin kildare and galway,still the same way, reflashed it a couple more times ,i have flashed boxes before and jtagged some boxes but this has me stumped

 

Any helpers please?

 

i have two boxes side by side the good one say signal is 87% and the one that is sticking wont put up the signal when i press the sig button if its any help

 

Vicatron / all,

I have checked COM port number and that it is working OK via device manager. I have even plugged cable into both ports .. and tried downloading via COM 1 and COM 2 in each port. No luck.
Could you confirm that everything I need included in GTROM.exe file .... firmware and communications software ?

Any help appreciated.

Brgds
Joe 90

 

hi allen,have you tried flashing with earlier firmware to see if that helps and manually enter keys,just to rule that out,im afraid you have more exp than i have if youve jtagged!

 

Lads,

Ive got the b0x super starview 3 and have been trying to upload the most recent firmware from eamos library since xmas. However I keep getting no percentage upload or else flash update failure.Having looked at this thread it seems to be quite a common problem but I've tried all the suggestions. Any ideas where I'm going wrong? I'm using a null modem cable and a usb connection adaptor as well so I've gone through the setting up of my com port - I use com port 3. I've been trying this for a while and still nothing. Any help greatly apreciated. Thanks.

Josh.

 

tried flashing two previous firmwares no joy thanks axxxo,i think is for spare parts

 

also a common prob is faulty null modem cable

 

did i not all ready answer you else where????

 

Good morning moggs!

 

mornin

 

hi my mate needs help any boxes work in magnet in dublin help please?

 

In a nutshell no

 

Hi all. myself and my mate have the star view 3. I have updated both to 8.04 but the channels are all over the place. there are all numbers and no names and signal is bad even though the signal strenght says 90%ish. where can i get a channel bin file that will work or what should i do. i'm in cork.
cheers.

 

do a factory reset then see what way it goes when they come in all gobbildy gook its normally a signal stregnth prob so be patient with it

 

ok. just found the channel bin file. all names are there now but now i have no signal. the broadband is working perfectly but the box signal strength is 0%. it finds the channels grand. i used the same lead for broadband so i don't think its that. have i turned off something or what?
any ideas?
cheers for the reply btw.

 

press menu then 1570 and turn on the emu that should be it also make sure the pipe cable is in the right slot