Starview 3 The Box Super - Flash Update fail...

emu is on and cable is in right place. does the box find channels on setup if there is no signal? with the exception of chorus info channel all others say no signal, no matter how long i leave it on that channel.

 

Afraid that it does not find channels when there is no signal, when you get that message it usually means exactly what it say's, "there is no signal" - so you either have got a bad connection somewhere in your COAXIL Cable (To Cable Input Socket), you have not chosen your correct provider before Installing/Scanning or it is down completely

 

thats what i thought but in fact it does. well should i say there is a signal but the box says 0% signal. I did a factory reset and rescaned for channels and now all is well. cheers for the help.

 

Yes, earlier. I have tried what you said, but I will try it again, thanks mate.

 

try clicking on set default key emu in secret menu sometimes that works

 

Hi There

Mate of mine has starview the box dont know if its a clone or not
8x20 vents on top scarts on the right if you look from the front need to know which firmware to put on it and where can i find it .

Thanks very much again for all the help ive had over the last few months .

Regards Gary

 

I am trying to flash my box with the 8.04 from 8.00 and it keeps saying Flash Update failed.I have followed the instructions to the letter click bin file and locate the firmware the bin file button is not clickable.Anyone offer me some advice????

Thanks in advance

 

Its ufl (all in one firmware loader)just press download.

 

Hi karljd

Can you answer mine just above the other one

Regards Gazza

 

You do not look for a BIN file or use that feature on the Starview The Box Super (Does it say that top left fron of box) - the SV3 Super is an all in one (UFL) loader and firmware combined, you just press DOWNLOAD button on the left hand side of the GT Rom The Box Super 8.04.

 

Allright malci mate
@gazza you need to no if its a starview 2(the box) or 3(super)

 

Oh ok,thats what I was doing...It just stays on 0% for about a minute,then says flash update failed.It then reboots.

 

karljd its just says the box on the front left hand corner

 

are you on vista?if so it would make your life a whole lot easier if you could try the download on a pc running xp with a serial port.

 

Fine and yourself I hope karl mate

LondonE13, how have you got the box connected, is it by a proven NULL MODEM lead only and not via an adaptor and what OS are you using XP or Vista.


EDIT:- LOL karl, got to stop meeting like this, and try to slow down

 

Hi karl and malci its been a while hope your well;

 

Fine thanks and you I hope Antoinette

 

up to you mate there is no clonesafe firmware for that box(starview2 the box)if you want to give it a go here's where you'll find it EAMOS

 

Hi antoinette how's it going?

 

Thanks mate

Ill give it a try in the morning and let you know
how i get on.

Thanks again.

Regards Gary