Starview 6 Futureproof ?

Try Guinness


http://www.4shared.com/file/HXm1bsEC/GUINNESS-100_FOR_IRELAND.html

 

Is it running off more than 1 server mate? It's weird the ones that are missing init???

 

how is the market going to be saturated the box lasts a year then you bin it and buy another ,only the guys who set this up will know how many cards are needed and when you flash the box you get the choice of which server you want to connect to
oh and yes its working in uk still a few channels missing though

 

wlash,try firmware 1.01.see if this gets most of them back.then post back.

 

WTF????

 

There is problems with the server
use firmware 1.00 guinness

 

hooter your right,wlash should use the latest firmware for that box and your correct again when you say there are problems with the S/V server.however the problem seems to be with the box,he is only receving three channels[RTE1, setanta and euronews]to be honest i did not even know the firmware 1.02 he has on his box existed[i dont have the box so im relying of others for information]it does sound as though he is doing something wrong in the setup of the box,for he should have more than three channels,lets hope someone gets him sorted.am of out fishing now will pop back later...

 

i think grooverider 1.02 is a copy of 1.01 and just renamed
also if he follows clairb's guide he can not go wrong, he must be forgetting to put istream in or over-looking something maybe forgetting to put lan cable in
anyway hope you enjoyed your day fishing

 

im having similar problems.

im n*l dub, ire.....with ST6 ian (notcombo)

i had the grovve file and all was well apart from missing some channels...so when i saw the guinness i decided to try it (bad mistake)

the update to the guinness seemed to go fine...scanned channels ...all good

but it will not connect. the ian cable input on the back is lighting up and the router is flickering away but it still says "not connected" on all channels

ip is set to auto...and istream....

so only able to watch the 4 or 5 channels

interestingly in the keys section all transponders only seem to have half the keys in...the rest are zeros..(just saying in case it helps solve this)

i did the install like a german tech...

is there a port issue regarding routers?

any suggestions...thanking all

 

did you do a factory reset install file 1.00 do another factory reset
and follow the link belowlink

 

thanks for the reply.

yep factory default...then guinness load...istream..then scan...still nought

in the ip address...ive noticed that the last 3 numbers are not the same as when i do a cmd/ipconfig on my pc which is connected to the same router...could this be a thing?

 

im in edinburgh and it took a few goes but in end i got box working,1st thing to do is upload grooverider file then scan box,then enter 8989 and make sure its on autoupdate then exit til you get tv picture,go to skysports 1,you will get scrambled channel,go back into USb and upload guinness for ireland,carling for uk,then go to menu-options-network-select Ustream(uk) or Istream(ire),then go to Ip set up and make sure network selection at AUTO,exit back to sky sports 1 and wait a few minutes,if it still does not connect,remove LAN cable switch off box then go to usb and upload guinness/carling file again,it may take 1 or 2 goes but it will eventually work.

 

thanking you...im giving it a go...lots of fingers and things crossed

 

darn tootin....still nothing....tries 6 times...ref in fairness

do i need to go near boot loader at all or just SW

 

ok flashed with GUINNESS. same story. only 3 channels coming through...
must be the server issue. would everyone not be affected the same though?

 

just SW

 

im in south dub....if that helps

 

doesnt really

ok lets start at beginning,when you scan box how many channels are you picking up?

 

do you have your lan cable going from router to box & is the light on the back of box where lan is inserted
when you flashed with new firmware did you da a factory reset and follow guide and make sure everything was double checked make sure in the emu/keycode everything was on
your ip settings should be on automatic and make sure you press apply, ect.ect..with the rest of the guide
i have just put mine on there (in dub aswell) and just the usuall ch missing

 

142..plus radio