Starview 6 working!!

if your net is working, then something has happened with the connection between the box and server I would reckon..... could be just down or could be an intermittant fault

 

his internet is working mick.he checked all cables,fine

 

im gona pop over to him,check back later

 

Ask him to select Irish server & to auto-connect box to router.
Then check network data on box to make sure box & router are talking

 

all seems ok now,went into menu checked all settings,exit back out and switched of router and it came back on.seems like a router problem,all ok now.

 

hi

my symbol rate is 6887 still cannot connect any ideas what i am doing wrong? the software i have is groovefinder sv6 1.01?

thanks

 

Hi Horro53

If your set up is good and an active internet connection is made then
'Connected' Is displayed below the Channel Name
Or 'Not Connected' as the case maybe,

Hi eamo Too, I have changed symbol rate and i got no Channels lost FTA's Also.
Ta for the tip though always worth a try.

 

hi takagi

yes "not connected" is on screen alright i have my ip address as i followed resrob posts and got that sorted.

any ideas how to get it "connected"

sorry if this seems an obvious question

 

HI

Sorry it also says "error connection 8000" when i go into network file manager.

reswob could you tell me how you sorted your router problem?

thanks in advance

 

horro,i see your haveing some problems.im going to assume you followed clairb tut fully right to the point that you selected the istream server etc,etc[tut is back on page 9 starview 6 futureproof]my problem was in my ip settings all the six windows were blank.i got the required info to fill in these blanks by doing this[press the start button on your pc then>> run >> type in the black box >> ipconfig press enter]here is were you will find the info to fill out those blank spaces,im going by memory and going back over other posts here as that box was for a friend and i dont have it in front of me now.put your network settings to auto,nextbox ip,put in your ip address and make the last three digits greater than whats there{lets say the last three digits of your ip are 225,change them to 230 or 235..once there greater}subnet mask,gateway and dns boxes fill out with the info you got from pc.leave the 2nd dns and the user dns blank{o.o.o.o.}and press apply....if successful these boxes will revert back to all zeros for a few seconds then come back on filled in again,exit back out till you get a picture......im certain the last three digits of the ip address were greater if this does not work try making the last three digits lesser.good look mate

 

Try this;
Network setting------Auto
Select-- 1st DNS
APPLY
The box should collect all req. data from network itself.

 

thats much simpler eamo,cheers

 

Cheers lads

just to let you know i am up and running thanks for advice worked a treat!

 

What do you guys mean by its working?

Movie channels unlocked??

 

yes

 

success!

 

nice one mate

 

i have just brought starview box 6 but can not get any of the premium channels or some of the freeview 1s such as ivt3,sky aports news n a few more.anybody with any ideas on how i can get them?

 

whare u based? which provider are you on?

 

hold on a minute, so this box works with N3 on all premium channels?

where do you get it from as you say it lasts a year ect?

what site did you lot buy from?

cheers