StarView Box 3 - No channels found

what firmware have you flashed the box with?

 

Ok. If you have updated the box, and are sure it updated ok...and waited until the screen said "Download successful" before you disconnected the leads, (by the way did the display on the box go up to 100 ?) then it must be something else other than the download.

Check that all leads are connected correctly. I know we said this before but at one point I got the same kind of thing and I had the incomming cable in the wrong connector.
Change them around to see if that works.

Is the TV working with the cable directly into the TV? Bypass the box altogether to see if you have a signal in the first place.

No signal suggests that the problem is not the download but the way you have reconnected it.

Is the Scart lead in correectly, are you watching on AV1 or AV2.

It would seem to me that the problem must be in the connection end if you are happy with the doenload end of things.

can you get into the menu of the box...this is another way of seeing if it is connected correctly.

Let me know.

john

 

yeh john i get to auto installation and it gets t 6% den freezes, i av seen the question on a forum on afterdawn before however noone anwsered it.

 

you still havn't told me what firmware you put on your box + which starview is it- 1?-the box? or -super?

 

So you have a signal comming through and you can get to the menu on the box, yes?

Turn off the box from the on/off switch at the back of the box
Try again to autoroll

If that doesn't work then try this
try reset the default button on the hidden menu (with the emu button in it)


Are you 100% sure you have downloaded the following for genuine boxes

Cryptstar - V1.4 genuine only firmware for GENUINES found in "Starvi*w" firmware folder.

File name: CryptStar-v1.4-Core400.bin

 

the firmware i used was crystargenuine but wen extracted was crypstar v400 something i think i have a starview 2 an its the box

John there is no signal because its freezing and failes the searching

 

I tought as much if you had of told me that when i asked earlier i could have told you you put the wrong firmware on if you are certain you have the box(it will say it on the box)you will need to reflash with 4.50 for Ireland or 4.51 for the uk

 

Ok. We need to know exactly what box you have. But it maybe that you have actually put on the wrong flash.

Please llok at the following:

SOFTWARE/FIRMW@RE

You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.

You will need version Cryptstar - V1.4 genuine only firmware for GENUINES found in "Starvi*w" firmware folder.

You will need version CryptStar-v1.4-Core257.bin firmware for CLONES found in "Starvi*w" firmware folder.

You will need version 4.50 firmw@re for THE B0X IRELAND found in "THE B0X" firmware folder.

You will need version 4.51 firmware for THE B0X UK found in "THE B0X" firmware folder.

You will need version 6.1 firmware for THE SUPER B0X found in "THE B0X SUPER" firmware folder.

All firmware/loader can be found in the link at the end of my post marked updates and shared folders

 

karl i have a starview however when i on it it definately says the box so wt firmware do i need

 

how do i get it to u then mate its all double dutch to me

 

Look at my post above for the one you want,,,and you location

 

we need to no for sure has it got the box wrote on it?or just starview

 

*removed*

 

ok however how do i found out what box i have
any clue

 

Hello Senior Members,

Can somebody please help me, as I am currently stuck!!

- B!!L