StarView Box 3 - No channels found

see above

 

how do i do that then dude

 

ok will do creaky.
Apologies, as of this moment I will not respond to any more mails of this nature.
Cheers
John

 

ok ive checked my box it says thebox on the top so any ideas of what to do by the way karl and john i really appreciate ur help

 

Hi bill, you are using NTell broadband, presume then you have a splitter from your broadband connection to the SVSuper, suggest you remove the splitter and go direct to SV and see if you get more joy as to your problem, also dependant on situ. ie. broadband upstairs and SV downstairs, distance apart etc. your signal strength may be to low, your setup should work via the broadband - probably stating the obvious but I am assuming it is cable broadband? where are you Ireland or UK - ideally you need the basic TV package to conduct a positive test.

 

as isaid you have the wrong firmware on use 4.50 for Ireland or 4.51 for the uk its all in eamos library under my pic

 

You will need version 4.50 firmw@re for THE B0X IRELAND found in "THE B0X" firmware folder.

You will need version 4.51 firmware for THE B0X UK found in "THE B0X" firmware folder.


All files in the shared folder under my sig.

John

 

were wats with every body is there a big clamp down or wat

 

SNAP! Karl.

 

indeed goona leave you to it john having an early 1 good night

 

There are no more posts allowed regarding codes for a variety of reasons, some legal some to prompt upgrading.
No PM, and no futher discussion.
Thats just the way it has to be from now on.
As you can see from the Mod's post to me I cannot help you further in this.Sorry

John

 

You should be sorted out now.
I am off to bed... up at 6.00am for work.
Lets know how you got on in the end.
Cheers
John

 

Hi Malci,

Thanks for your reply.

I am in UK Man****t*r. Yes, I am using cable modem. I tried both connectors of the Splitter; but SV is still not working... Unable to pick any channels... I tried even without splitter as well but of no success..

Yes, I am also thinking of same to try something like using a base package for trying the TV.

BTW: Do you think that i need to update code to rectify this issue? or any other suggestion..??

- B!!L

 

OH MY GOD WHAT HAS HAPPENED TO THIS FORUM,
IT WAS THE BEST AT ONE TIME,
NOW IT SEEMS TO BE THE WORST,
ALL BE BOOTED OFF.
I FOR ONE WONT BE BACK HERE AGAIN
AFTERDAWN R.I.P

 

if you abide by the rules there is no problems you have all been on here a long time now and you knew this day was going to come where you where just going to have to update your boxes that date has no come

So would it not be easier to all concerned to update the boxes to the Autoroll software that is available and the help available to do it

And as you are all aware we had a good run on here with C***S been available all over the places even after people where asked not to post they continued to regardless even when we had a dedicated page for them

If i can remember there is one thread on here and 2 pages where taken up with people just posting C***S all over is and quoting them as well again and again in there posts