Starview box in Dublin

Hi guys i have a starview box about 16 months but lately i keep getting scramble or bad signal on screen can anybody help please!!!

 

Is it an genuine S******w or a clone count the vents on top of the box to confirm whether it is or not
18 slots x7 rows = clone
25 "x7 " = genuine

Also what api version is on your box ?

 

Its genuine but dont know what pvi is. in work at moment so cant check anything

 

Press menu > System information and tell us what the api is please

 

OK guy,s i work shift and my PC at is on the blink.
Sorry for the late reply but i wont be able to let yous know about the API until 2morrow nite.
Realy happy with the help just need you to be paitent with me not used to doing anything on line.
Will reply 2morow nite with the info you need.

Jimmal.

 

No problem , just come back when you have the info

Basically if you have any other firmware other than 4.00 you will need to update it


You will need a null modem cable DB9F to DB9F.

Null modem info

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter info

http://www.maplin.co.uk/Module.aspx...t10&doy=search&MenuName=USB to Serial Adaptor

These two cable links are only for reference as they can be purchased alot cheaper on fleabay.

All firmware/loader can be found in the link at the end of my post marked Eamos Library.

You will need the GTromloader, (Starvi*w Software Uploader), found in the Starview software folder of the link.

You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder.

And please download the Starvi*w PDF guide,(similar instructions, this will give you step by step instructions on how to do everything.This can be found in the Starvi*w Documentation folder in the link

 

Think i might have a clue to my problem nephew downloaded software for his starview .
Witch is self scramble onto mine would this cause any probs .
Mine dosent self scramble.
Just a thought.

Jimmal

 

Yes 4.00 will update the codes for you

 

All right lads.
Back with my API ver its 300e and the boot ver is 7.0 .
Does this mean i need the new software.

Thanks jim

 

Yes you need to update your firmware to v400 v300 had a lot of cliches in it

 

Thanks a lot lads.
Im off all week so hopefully this will solve my problem.
Will let you know how it goes.

Thanks a Mill for all the help.

Jim

 

no bother all the help you need is in here so any probs come back