Starview Box Problems(fixed)***no email posting or banned***

Des

If you like to try these codes only the first line has changed when you put them in do a re scan also check in the channel editor the channels could be there under another name or have the word hid beside it check this first before you change to these codes

00: 95 DB 55 38 8D A0 5C 96
01: CB C9 BB A1 1F 39 FF 86

 

fergus,
Why is first line changed on 00 (95 DB 55 38 8D A0 5C 96) to earlier codes?
curiosity!!!!

 

differant areas have diff. key rolls

 

If you go back thru the thread another person paid this guy to come out to her house in Dublin and re code with them numbers and she decided to share them with the site she said she is back up and running and no loss of channels there will be a proper fix out we just all have to be patient

 

Hi guys,Im new to the forum here, just wanted to say thanks to everyone who put up the codes previously which helped get my starview box picking uo the channels again.

However i cannot apply these codes to a box that belongs to another family member, because instead of showing KEY 0 and KEY 1 in the menu this box shows: KEY 1 and KEY 2

I belive this is because said family memeber was/is still using the analogue signal!

So basically does anyone know the codes for KEY 1 & KEY 2??

Thanks in advance.

 

oh ok, I thought maybe I missed something,
Anyhow, I did factory reset to try and get back the 4 missing channels however, I didnt get them back and I lost about 4 more channels. So it maybe wise for people to hang until proper fix comes through before they lose more!

 

Nutzz

Yes it would be

s79x

You can change the number by highlighting it and use the numbers on the key pad put the code in first set press ok

then enter the second set and press ok again

exit 3 times should work
also i am not sure if you are on analog you can use that box as sky services use digital and so do N** to send the signal could be wrong someone else might have a better insite to this

 

Fergus, No luck...I have tried everything and still only 21 cr**p channels, looks like i bought a bogey.. if you figure out any thing please let me know Many thanks

 

Hi fergus we tried that but it just reverts back to 01 & 02, but thank you for the suggestion anyway.
By the way that box was working fine on its analogue signal up until last thurs/fri when the frequencies changed.

 

Des

can you pm me

s79x

did you try a factory re set what type of box are you using and are you sure it is analog they are using

 

Is it all right to flash with 3.00ee with the new keys already in
or do you have to revert to old keys, have got the 3.00ee due to your earlier posting.

 

janie75


if your box is up and working do not flash with 300 yet seems to be a prob with the so called cloned boxes people are unsure which ones they have so to be safe hold off until it is sorted

 

I have measured the box and it is 10.5 x 7 inches so again from your earliear postings. but will take your advice and hold off, everything is working with the new keys, thanks to all who contribute to the forum for all the help and advice posted keep up the good work Cheers

 

i have the same size set top box but still unsure whether cloned or not so i will wait and see what happens there will be a fix just have to wait and be patient

 

Hi folks new to the forum and have had similiar probs losing all channels and using codes have gained some back but I am still missing Sky sports xtra,sky movies premier & + and a few others.Is there a way to get these back,oh yeah Im in Waterford Ireland.Thanking you all for your help so far,as I didnt get anything with box,no cd,no cable,are these possible to be sourced easily ?

 

rong1mod

Did you let it scan till it was finished or did you stop it after some of the scans failed if so you need to rescan and wait till it is completely finished scanning without stopping it

 

Hi fergusb, yes we did a factory reset, the box is the starview SP6109053, and it is definately the old analogue signal.
Please note after after trying to save key 00 manually the menu still reverts back to 01 & 02 even. This also applies to when you do a full reset.

Thanks
s79x

 

Ok sorry i cant help you out with your problem but maybe there is someone else on this forum that might be able just keep trying

 

Fergusrb I changed codes set EMU to ON and then did an automatic scan for channels 69 found using this nethod,but when I go to sky premier get a blank screen then after a bit data is being updated [0%]but the percentage doesnt rise stays at 0%.Maybe I'm doing things in the wrong sequence or ommiting something.To access hidden menu I find typing 1570 works here in waterford.

 

try looking in the channel editor channels could be under a different name or else hid is marked after prog check it first also did you save after putting in the first set of codes and then again after second set then exit 3 times