Starview channels

All code changes are to be found here
http://forums.afterdawn.com/thread_view.cfm/531363
- I do not think there has been any change since 18/12/07 UK, if you are experiencing problems re-update of key's then maybe it needs a KUTA.

 

hi thz for the codes but i need to ask ya guys one more thing what is KUTA and when i turn ma box on it says bad channel could any one tell ma why all this happening!!!!! thz again for ur support ;-)

 

Sorry adnan, don't take it personally. KUTA is my way of saying a Kick Up The Ar*e - by pressing the default key in nagravision menu - it lets you know that auto-updating of keys is working.

 

By the way you should check that you have the correct firnware on your box - V400Ee for genuine box - V257Ee (FIXED) for a clone box, both are fully working with auto-update.

 

Many Thanks Celtic71 downloaded ver 4.00 re scan etc up and running thanks again.

 

anyoe got the n.t.l codes foor nagravision? went dwn last night a about 2in the mornin ?

 

Hi, dont supose you have those codes yet do you?

 

There have been no code changes overnight...were abouts are you?

 

have u checked ur emu on? power off box then on and report back with more info

 

hi can anyone help me please. i got the box cant seem to find the emu menu. i've tried going into menu and pressing 1570 but still cant find secret menu. someone please help... dublin

 

Try this and see if it works:
press menu
press 1570.or 1680 (this takes you into secret menu)
Press OK on "nagravision"
Make sure your cable provider is listed at top N*L or T***WEST C&W CHO**S ect
Go down to "Key Number" and check its on 00
Go down again to "Key Data" and input the correct keys
Press OK to store
Go back up "Key Number" and change to 01 using the > button on the remote control
Go back down again to "Key Data" and input the correct keys
Press OK to store
Press "Exit" , Check the bottom option and make sure "Key EMU" is On
Press Ok again
Then "Exit and "Exit" again back to the main tv screen

 

Sorry about that ..it looks like 1570 is the key you should use and not 1680 as i suggested, perhaps some of the lads are around and they could advice...

 

Is it starview 1 or starview 2 The Box, if it is sv1, then check what firmware you have on the box, it would seem that you have V2.58Ee and this will not let you in to secret menu, you will need to flash to a later firmware ie. V400Ee genuine box V257EE FIXED for clone (can't se it being a clone as anything over V260 would have killed it). Go to Main Menu and down to System Info and check.

 

For future reference the other method of gaining access to secret menu on both SV1 and SV2 The Box is as follows :- Menu - Press Parental Control - Press Info on remote and enter 2004 and Cas Menu will appear. scroll down and turn key emu ON.

 

Thanks for your assistance malci, as I didn,t want to give out the wrong information, MrDarcy, try this and let us know if it works!!!!!

 

the box when bought is freeview only no access to emu,u need to flash to 451eE for uk,450eE for irl,to access emu

 

Sorry for the typo error re-dodgy firmware for SV1 it should read as above 2.58eE

 

I have the same problem with scrambling. The starview box that i have has 7 rows of 13 vents with an API version : 2.58e_E and a boot version 7.0 18. Sep. 2006
Any help please?

 

18x7 = Clone
25x7 = Genuine
13x7 = 1st Generation

Also you can go here to see some pics
http://www.freewebs.com/dooby2oon


You will need a null modem cable DB9F to DB9F.

Null modem info

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter info

http://www.maplin.co.uk/Module.aspx...t10&doy=search&MenuName=USB to Serial Adaptor

These two cable links are only for reference as they can be purchased alot cheaper on fleabay.

All firmware/loader can be found in the link at the end of my post marked Eamos Library.

You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.

You will need version 4.00 firmware for "1st Generation" found in "Starvi*w" firmware folder.
You will need version 2.57_FIXED firmware for "CLONES" found in "Starvi*w" firmware folder.

And please download the Starvi*w PDF guide,(this will give you step by step instructions on how to do everything.This can be found in the Starvi*w Documentation folder in the link.