Starview channels

hi just tried doing the parental control bit still no luck. :-( . so went to info and it's api ver 4.54e, boot ver 7.0. (now to tell you the truth this is all gobbledegook to me). i also checked the vents which are 25x7. hope this is helpfull and hopefully you can help me.

Is it starview 1 or starview 2 The Box, if it is sv1, then check what firmware you have on the box, it would seem that you have V2.58Ee and this will not let you in to secret menu, you will need to flash to a later firmware ie. V4.00eE genuine box V2.57eE FIXED for clone (can't see it being a clone as anything over V260 would have killed it). Go to Main Menu and down to System Info and check.[/quote]


For future reference the other method of gaining access to secret menu on both SV1 and SV2 The Box is as follows :- Menu - Press Parental Control - Press Info on remote and enter 2004 and Cas Menu will appear. scroll down and turn key emu ON.[/quote][/quote]

 

Can you tell me what area you are in like the Uk or ireland and then we will sort you out with the correct firmware you need to put on the box ok

 

i'm in dublin. hopefully you can help. thankyou for your time

 

Ok first thing you need is a null modem cable do you have one of these if not you will need to either borrow one from someone you know that has one or buy one

Then you will need to download the V4.50 firmware for TheBox

Then you will need the V4.00 gtrom loader as well

Both the firmware and the loader are available on the eko link at the bottom of the post

Let me know do you understand all this thanks

 

Happy New Year Ferg, just in for a quick nosey see you later

 

You to mate and to your family as well

 

thanks very much for your time, a friend has one of those cables wont be able to get till during the week when i've done that i'll let you know how i get on. thanks again

 

If he knows how to do it get him to do it for ya ok

 

Fergus, sc0user,Celtic71,Thanks for all your help in 2007,and heres to a smashing new year HAPPY NEW YEAR To all on Afterdawn/starview

 

Hi Folks,

I have a Starview box.

However, I have been away since September and now that I've come back, there are no channels coming through.

So I was wondering, what's the latest Firmware/Software and/or codes I need to get it up to speed.

Not too well informed on the whole thing so any help would be much appreciated.

Happy New Year,

K.

 

Sorry Kraggy
my message got lost in yours.....

Welcome back..... the codes and all the info you need are at this other thread... http://forums.afterdawn.com/thread_view.cfm/531363
if you click on it you should be sorted ...Happy New Year

 

double check go to menu 1570 and look for key emu off switch to on exit exit

 

There has been a few code changes inteh UK since Sept , check the latest codes

Codes Here ---> http://forums.afterdawn.com/thread_view.cfm/531363

 

downloaded everything you said and linked s/view to pc but when i flicked on/off switch on the back of s/view couldnt get" ready to download" message on the front panel.however my pc said it had found updates for hardware and updated but i still have same problem ie picture scrambling every so often.
not very good with this stuff
thanks for your patience !

 

When you are putting the file on your box you do not touch the back of the box only put the box in standby by pressing the red button on the remote when you see 12:00 on the front then press download to download to your box and wait till it has finished even after you see 100% as it is still not finished you will get another pop up telling you it has finished then you turn the box off at the back and then back on again then do you channel scan

 

thanks will try that asap.