Starview Firmware

It just wont update is there anything else i need to do and was i doing the wrong thing

 

Well that tells me a lot!
Are you using the correct cable? Are you using a USB to Serial adapter? What is the message GTRom is giving you? Have you selected the correct COM port?

 

Im not using a USB to Serial adapter Im using just a Serial adapter GTRom is saying Update complete.Ive selected the COM port 1 and the update reaches 100%.
But when i connect my box too the tv I tuned to sky sports 1 and it said data is being updated then it will reach 250% but then it will refresh and try again and it keeps repeating this over and over again, Ive have the key swiched on also.

 

Sorry Steve missed your post with the Sky Spts1 issue.
Select SSpts1 then press info. note the frequency shown.
Go to menu on your remote, select channel editor, enter 0000 as the password and delete the channel. Then exit, go to installation, manual scan press the < button on the remote to zero the frequency and enter the frequency you noted for SSpts1, go down and enable network scanthen enter. This should bring it back for you. You will have to add it again to your favourates.

Get back and let us know how you get on

Pip

 

Again our posts crossed. go to menu enter 1570 for the secret menu and enable Key EMU

 

Thanks for the help but I still have the same problem Ill be back on tomorrow around 5 - 7 tomorrow for more help.

 

Not a problem, hopefully Fergus or someone else will be here to help you further.

 

Thats grand Ill see you then

 

my starview box has a ver.4.0 firmware but today won't update codes .. trying at least 3 hours ..still on telly : 'Updating codes xx%' ...and nothing ...
any ideas what's wrong ?

 

scouse..... if celtic dont take me up on my offer there yours.... (if we all showed some love this world we live in would be a far better place) my out look on life..
all the best ppl,
celtic many thanks again hun (soz about daddy and all that).

 

Try factory re-set as some frequencies have changed.

 

...tried, same effect

 

Hi, Like a lot of people, my starview 1 failed to update yesterday evening (N*L Dub). Starview 2 updated OK. I manually entered codes and it worked. Do you think i will have to manually enter them from now on or was this a one off? I have a firmware version 4.00. Can you upgrade starview 1 from v4? Thanks.

 

my starview with firmware ver 4.0ee (n*l Dublin7)was updating well before yesterday's code change... maybe they 'did' something 'new' ?
have no idea ...anyway, when entered new code ( was just one leter in code wrong ) manually all working fine

 

Have a read yes they have done something

 

@cs0 : will starview with 4.0ee update codes after this 'attack'

 

I know its not the right place to ask this but can someone who's box is currently working please tell me what codes they are running off.

I inputted ferg's codes yesterday.
"N*l IRELAND 3rd Apr 17:14 pm

00-5B 74 36 A3 B2 30 CB 46

01-54 0D 81 09 F9 6E 17 F9 "

And since then I only have a few channels and nothing will update.
After searching and searching for a solution I stumbled across Celtic 71's post.

"Menu > Factory Setting
PIN 0000
OK to delete

Turn box off at the back for a minute and turn back on

English > Installation
Choose Provider etc
Automatic Scan
Press OK
Channels found
Exit

Press Menu then 1570
Turn EMU key ON

Exit , exit , exit"

Just got me thinking that if I hadn't changed the codes would this have worked?
I dont know anything about firmware but my system info tells me i'm Api ver 3.00e_E and Boot Ver 7.0.

Please someone help me out as I cant miss the footy at the weekend!!!
Thanks!

 

So what have they done? Will we have to manually input codes from now on? Thanks.

 

Jaysus N*L better not have done something to stop the codes from being updated manualy.

 

if you have problems with Ur PC visit my forum http://forums.afterdawn.com/thread_view.cfm/647365#3919972