STARVIEW NEW FIRMWARE

can anyone else confirm that this is true?

 

now its working lol, had to leave it on the channel for a while hooray keep up the good work !!!

 

glasgow still on m8

 

its still working here in bristol mate hopefully this is a sign of things to come!!!!!

 

Alright lads, bit of help if ya could please. Trying to sort out SV6 for a mate, been at it for a few hours now to no avail. This is my first bash at an SV6, was familier with the older SV's but switched to KV once the new NAG rolled out. Followed all the tutorials etc, put 'theshowmustgoon2.12' via usb, factory reset and scan (have scanned with LAN cable in & out). Cables are fine pressed 1819 on SS1, tried resetting router box off for 2 mins etc, all prem channels say 'scrambled'. Read somewhere I have to make sure it's on U-Stream through network in options. Is this correct as when I go into network there is only 2 choices, IP setup & SW download.

PS - Don't know how long he's had this box, is it goosed if it's over 12 months or am I off the mark there?

Cheers

 

sw download i have sv 6 and its workin fine m8

i have sv6 and its going ok sw download is the option ur lookin for

 

box should be fine
later flashes remove the need to set ustream etc

go into network settings/ip and scroll to bottom and click apply, that will
zero them out. Wait 10 secs and it should refresh.
If it's picking up these then network should be ok.

exit, go to sly 1, press 1819 on remote and it should say enabled.

leave on that channel for a few minutes and it should come back on

pressing centre button on remote should show connected at bottom of telly if all ok.

If I have an issue I usually reboot the box as well as modem.

PS, I never bother factory resetting and never have had a problem as I hate
re deleting all the garbage.

 

hi guys i am gettin stressed here! i have a starview 7 ,have loaded the showmustgoon firmware and gone through the installation as its written but still no luck, i have a starview 7 already which i got workin about 2 months ago and have no such problems with that one. was wondering if i was forgeting to do something or missing out anything. any tips or a readu up would be appreiciated guys, by the way when loading the software can u load it on sw upgrade or boot loader upgrade or should i try both if one doesnt work?

 

Nice one, will have a go tonight when I get home. It was picking up the IP address etc but it does say 'not connected' in bottom right when on SS1. Will have a bash and be in touch. Thanks

 

Guys I need help.
I installed the new firmware and search for the channels, enabled it using 1819.
It's picking all the IP settings s but no channels work except for free ones.
Are there anything that I am missing?
It says Not Connected at the bottom.

 

u gettin gold watch sky 1

 

thoese extra channel come on today m8

 

Had a stab at that mate, zero'd out all the addresses & it kicked back in again. Still say's not connected in the bottom right of the screen. If i try & do s/w update the 2 bars display on the screen but they don't fill up, they just vanish. I think modem & everything is ok coz as soon as i plug the Kryptview in everything is sound. How do i know if the firmware has loaded on correctly, is there a screen that tells me whats flashed on the box? When i downloaded 'theshowmustgoon2.12' its just a 'white sheet' that i save to my desktop then transfer onto the usb stick. It also says unknown file, should it have a specific file type? Sorry if there's a few questions there just trying to get to the bottom of it. Cheers, jb

 

Your pc wont recognise it because it does not have an association with it, just ignore that and put onto pendrive.

Browse to usb on stb and upgrade, if successful it will say so and say rebooting in 3 seconds.

Go to sly sports 1, select 1819 (enable) and wait around a minute and it should be ok

I also find occasionally that switching off via button at back helps it find it's brains. Not a bad idea to reboot modem/wireless router also

To check if update ok do the following.

menu
utility
system info
should show 2.12

 

Tried all that mate & still says not connected. Just gonna give the lad it back and stick my KV back in. Thanks for all your help, if anything does come of it i'll let ya know. Thanks

 

i have put new softwere on box ip add is working fine my modem is working fine but i am still getting not connected please help me am in liverpoolany idear y this is

 

seems like alot of people are getting the not connected info on the starview boxes after putting new firmware on and goin through the installation process, what are we doin wrong? any ideas guys? any help would be appreciated please

can we have a step by step from start to finish of what we have to do guys cheers

 

Sorry I could not help more

Strange one that, usually rebooting etc get's it working again.

Seems you are not alone in this.

 

try turning box of from the switch on the back of the box leave of for 30 seconds turn switch back on should connect

 

Yes that's what I have advised in a couple of reply's above

I believe he has done this already though