starview problem?

lol meant to ask what is a master reset

 

menu...factory setting..0000..ok.

 

just delete all the channels and then do another scan cool good man owes ya 1

 

I should have said, I'm on TW. Just run a scan on 747000 but nothing found. Any other ideas would be gratefully received.

 

Balcee,

Maybe if you run a full automatic scan and then look for a channel called ppv events. that's the channel that I'm picking up wrestling preview on. Any new channels should be at the bottom of your channel list. when you finish automatic go to any channel and press ok button to bring up channel list. Scroll to bottom of list for new channels. Would also go through all channels beginning with tv and then number. i.e. tv208 or tv 7426 or tv 1883 etc. Hopefully you will come across it. Good Luck.

 

the only channel that should be banned is mutv because they are sh*t

 

hi guys i have the box and want to watch the wwe on sunday and on the tv 1700 its says updataing but it does not happen i am with tw any ideas why this is not working thanks

 

Note down the frequency the channel is on

Delete the channel

Do an auto scan and check the end of your channel listing and see if its there , if not do a manual scan on the freq you noted down and check the end of your channel listing again

 

hi all, need some help please guys, Just got my box-t. i am in cork and will be using ch***s, so i have an aerial on the roof and it is cabled correctly,downconvertor and power inserter installed, when i powered on the box, i chose english,then installation and then i did not have to make a choice for the provider, it went straight to autoscan or manual scan, but when the scan is done i get no channels. Should i have got the choice to choose a provider,Also parental control is not acessable. Also just to let you know the aerial is from an old system, maybe analogue
version 5.01e E
date 12 dec
boot version 8,
Any help greatly appreiated

 

mate i have done that and it still does not work plz some one must know how to get it working

 

Channel TV1700 (the one that shows Wrestling/Boxing events
My frequency - 427000/6952 on TW (Birmingham)
Starview 1 v7 - firmware 4.0

When I switch the channel on, it just gives me 'Data being updated' message in a continuous loop. I pick up every other single channel

I've tried deleting and rescanning, scanning on the frequency and any other combination I can think of - I'm out of ideas :-(

HELP!!!

 

mate i have the same problem in gloucester tw the box

 

probably a stupid question but ar ye scanning the rite provider

 

yes mate have scaned with tw like

 

Ross7,

Have u tried going thru any of the other channels on the same frequency ( 427000/6952 ) that tv 1700 is on. Wrestling channel could be on another tv**** instead of tv1700. Go through the other tv**** channels and see if you have any luck. By the way, do you get a channel called "ppv events" on tw network. That is the one I get it on nt*.

 

tried all that still not getting any preview no mate dont get that channel
some body must have a clue whats wrong

 

boxes gone in waterford any 1 got any codes and can some1 give me the link to down load the software that updates the box itself that i wont need anymore codes for it please

 

Boxes gone in Dublin 11.Have been seraching this and reading old postes to no avail.. Anyone got the new codes?? WHy oh why did I bother buying this box.. !!!!!

 

lolalisa new codes here not the box thats the problem you need to update your software then it will autoroll itsself http://forums.afterdawn.com/thread_view.cfm/528527

 

found a banshee on the box at 5 pm. with all the gossip was expecting a mutant ninja turtle. banshee is delighted no. cartoons are back Yippeee. Thanks