starview problem?

hello im in dublin and my starview box went down on the 30 of januery.
got new codes as follows 00-3b.c9.od.88.41.04.65.df
01-f7.6e.45.22.8f.70.61.33
have enterd this codes but all im getting is scrabeld or bad channel.
tryed turning power off and on again and emu is on to. and still getting same results.checked all wiring.
it is finding 174 channels but ther all scrambeld or bad channel

 

you have the wrong codes in sankey9 have a look in here http://forums.afterdawn.com/thread_view.cfm/531363

 

yes, i have put new codes in as shown on your thread & have tried them both ways. & emu key is on.

 

Make sure you are inputting them correctly as sometimes a zero may look like an "O". Press the default key, input them again and make sure your key emu is on.

We do always advise members to update their firmware to auto update the codes.

 

how do i update the firmware, can you make the inst.as simple as poss please as i am far from i.t. literate. many thanks

 

blackdog6 just scroll up the page sc0ucer has explained it in fairly easy terms if yo need any help just shout.(in sc0ucers abscence)

 

thanks for your help. have now managed to get some channels but not all. will try to get the firmware update organised soon.

 

hi can anyone help is there a problem with NTL codes in Dublin am using the codes as posted on thread 30th jan no signal since last night ??????

 

If it says no signal there is a problem in your area or your coax is unplugged.

 

take the coax out of the box plug it into tv and see how your n.l is

 

It says "scrambled or bad channel" - any ideas would this still be coax and what is coax ????

 

the white cable that comes from the n,l box on the wall

 

thank you have checked the coax its plugged in fine must be problem in area

 

Have you checked your key emu is on?

 

can you help me with the auto rolling firm ware as i have no idea how it works

 

You will need to know if you have a clone or genuine

Please click the SV EV Info link at the end of my post to compare clone V genuine boxes.

You will need a null modem cable DB9F to DB9F.

Null modem info

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter info

http://www.maplin.co.uk/Module.aspx?Modu...dapter&doy=29m1

These two cable links are only for reference as they can be purchased alot cheaper on fleabay.

All firmware/loader can be found in the link at the end of my post marked Eamos FTA Library.

You will need the GTromloader V4, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.

You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder.
You will need version 2.57_FIXED firmware for CLONES found in "Starvi*w" firmware folder.


Updating Firmware

Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)

Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used

Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.

Run the GTROM loader by pressing Download and you will see the % progress increase
then Download completed message on your PC

 

have tried plugging coax straight into tv it works fine - also checked EMU is on still no channels any other ideas ?

 

Press Menu then 1570 and press the "Set Default Key" , press OK , go back into Nagravision and input the codes again and tune into S*Y Sports and it should update for you

 

Thanks a million that worked fine

 

hi, it's me again. after being switched off overnight, box showed'no signal' again this morning & had changed to another provider. have done 3 scans and can only find 64 channels but still showing as 'bad'. have now done as celtic 71 suggests & have got s*y channels but not 'aunty' etc. until i can get a null cable is there anything else i can do ? also, why does the amount of channels available vary so much when doing scans.