starview problem?

thanks for your help got it working was something simple was downloading the wrong thing

 

Leaving the box off for the night and trying it all again worked perfectly, so thanks for the help lads it's much appreciated.

 

bought a starview box well the new one the box was working well then lost power to the box any ideas wat da problem might be

 

Had the same problem with 1 rickhead if its a new 1 just return it to the supplier

 

I have a few channels missing from my system... abc1, itv3 and a few others.
The scan finds them but they don't fire up and all I get is a black screen.
Wondered if there is a cure for this??

 

abc1 is gone and as far as I am aware ITV3 doesnt broadcast until the evening.

 

that explains abc1 then!
I don't usually get itv3 ever- I lost it a few weeks ago.
I get 2 and 4 still!

 

It may be under one of the channels named TV***, (where *** indicates a number).

 

Hi, I'm a newbie to the site, have a good bit of experience of "The Box" on NTL but am trying to get one set up on Chorus in Kilkenny...True Cable Connection from the wall, no aeriels, not MMDS. Have 4.5 Firmware on it Boot 7.0 have done all the usual tricks and still absoloutly nothing, have changed the codes 00 and 01 for the appropriate provider numbers. It works fine with NTL so the box is fine..have manual scanned with all frequencies mentioned previously on this site and on the right 6785 or 6735 thingy. Im at a brick wall. Cant find anyone who has one in Kilkenny but Im sure they're out there. Can someone help?? Im at a loss here...wrecking my head. All help appreciated.

 

Hi.,

just installed a star view box. Every half hour or so the programme switches off and I get a message "bad channel or scrambled signal".

15 seconds later channel comes back on.

Please help.

 

You will need Digital available in the area as you wont get channels with Anagolue

 

Its probally a problem with the cable company

Press Menu > System Information and tell us what the API is please

Also

You will need to know if you have a clone or genuine

Count the vents on top

18x7 = Clone
25x7 = Genuine
13x7 = 1st Generation

Also you can go here to see some pics
http://www.freewebs.com/dooby2oon

 

does software 400e auto update ive done other boxs before but think put 257e on them then updated with 400e they are fine. not sure if to flash with 257e first or just flash with 400e on to these other boxs

 

The house has Chorus digital, the cable runs into the back of a digitial reciever the same way as NTL does.

 

2.57eE Fixed is for a clone box Version 4 is for a genuine box, both firmwares will autoroll the codes.

 

If you read ITD at the sticker underneath of the sagembox its chorus mmds. As far as I know Kilkenny Ch**us signal is received from a central MMDS mast.

 

nice one kidda

 

Youre welcome.

 

I SEE!!!! Thanks for the reply, sorry to bug you but what is the best option so??